All of lore.kernel.org
 help / color / mirror / Atom feed
From: Matt Porter <mporter@kernel.crashing.org>
To: akpm@osdl.org
Cc: linuxppc-embedded@ozlabs.org
Subject: [PATCH] ppc32: Add usb support to IBM stb04xxx platforms
Date: Tue, 9 Aug 2005 14:38:23 -0700	[thread overview]
Message-ID: <20050809143822.A17201@cox.net> (raw)

Support ochi-ppc-soc.c on IBM stb04xxx platforms

Signed-off-by: Dale Farnsworth <dale@farnsworth.org>
Signed-off-by: Matt Porter <mporter@kernel.crashing.org>

Index: linux-2.5-usb-405/arch/ppc/platforms/4xx/ibmstb4.c
===================================================================
--- linux-2.5-usb-405.orig/arch/ppc/platforms/4xx/ibmstb4.c
+++ linux-2.5-usb-405/arch/ppc/platforms/4xx/ibmstb4.c
@@ -11,6 +11,7 @@
 
 #include <linux/init.h>
 #include <asm/ocp.h>
+#include <asm/ppc4xx_pic.h>
 #include <platforms/4xx/ibmstb4.h>
 
 static struct ocp_func_iic_data ibmstb4_iic0_def = {
@@ -72,12 +73,51 @@
 	  .irq		= IDE0_IRQ,
 	  .pm		= OCP_CPM_NA,
 	},
-	{ .vendor	= OCP_VENDOR_IBM,
-	  .function	= OCP_FUNC_USB,
-	  .paddr	= USB0_BASE,
-	  .irq		= USB0_IRQ,
-	  .pm		= OCP_CPM_NA,
-	},
 	{ .vendor	= OCP_VENDOR_INVALID,
 	}
 };
+
+/* Polarity and triggering settings for internal interrupt sources */
+struct ppc4xx_uic_settings ppc4xx_core_uic_cfg[] __initdata = {
+	{ .polarity 	= 0x7fffff01,
+	  .triggering	= 0x00000000,
+	  .ext_irq_mask	= 0x0000007e,	/* IRQ0 - IRQ5 */
+	}
+};
+
+static struct resource ohci_usb_resources[] = {
+	[0] = {
+		.start	= USB0_BASE,
+		.end	= USB0_BASE + USB0_SIZE - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= USB0_IRQ,
+		.end	= USB0_IRQ,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static u64 dma_mask = 0xffffffffULL;
+
+static struct platform_device ohci_usb_device = {
+	.name		= "ppc-soc-ohci",
+	.id		= 0,
+	.num_resources	= ARRAY_SIZE(ohci_usb_resources),
+	.resource	= ohci_usb_resources,
+	.dev		= {
+		.dma_mask = &dma_mask,
+		.coherent_dma_mask = 0xffffffffULL,
+	}
+};
+
+static struct platform_device *ibmstb4_devs[] __initdata = {
+	&ohci_usb_device,
+};
+
+static int __init
+ibmstb4_platform_add_devices(void)
+{
+	return platform_add_devices(ibmstb4_devs, ARRAY_SIZE(ibmstb4_devs));
+}
+arch_initcall(ibmstb4_platform_add_devices);
Index: linux-2.5-usb-405/arch/ppc/platforms/4xx/ibmstb4.h
===================================================================
--- linux-2.5-usb-405.orig/arch/ppc/platforms/4xx/ibmstb4.h
+++ linux-2.5-usb-405/arch/ppc/platforms/4xx/ibmstb4.h
@@ -73,9 +73,9 @@
 #define OPB0_BASE	0x40000000
 #define GPIO0_BASE	0x40060000
 
+#define USB0_BASE	0x40010000
+#define USB0_SIZE	0xA0
 #define USB0_IRQ	18
-#define USB0_BASE	STB04xxx_MAP_IO_ADDR(0x40010000)
-#define USB0_EXTENT 4096
 
 #define IIC_NUMS 2
 #define UART_NUMS	3
Index: linux-2.5-usb-405/arch/ppc/platforms/4xx/redwood5.c
===================================================================
--- linux-2.5-usb-405.orig/arch/ppc/platforms/4xx/redwood5.c
+++ linux-2.5-usb-405/arch/ppc/platforms/4xx/redwood5.c
@@ -18,6 +18,19 @@
 #include <linux/ioport.h>
 #include <asm/io.h>
 #include <asm/machdep.h>
+#include <asm/ppc4xx_pic.h>
+
+/*
+ * Define external IRQ senses and polarities.
+ */
+unsigned char ppc4xx_uic_ext_irq_cfg[] __initdata = {
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 0 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 1 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 2 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 3 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 4 */
+	(IRQ_SENSE_LEVEL | IRQ_POLARITY_NEGATIVE),	/* Ext Int 5 */
+};
 
 static struct resource smc91x_resources[] = {
 	[0] = {

             reply	other threads:[~2005-08-09 21:38 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-08-09 21:38 Matt Porter [this message]
  -- strict thread matches above, loose matches on Subject: below --
2005-08-09 18:53 [PATH] ppc32: Add usb support to IBM stb04xxx platforms Dale Farnsworth
2005-08-09 19:03 ` Eugene Surovegin
2005-08-09 19:23   ` [PATCH] " Dale Farnsworth

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20050809143822.A17201@cox.net \
    --to=mporter@kernel.crashing.org \
    --cc=akpm@osdl.org \
    --cc=linuxppc-embedded@ozlabs.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.