[PATCH] aiclib remove dead

[Christoph Hellwig <hch@lst.de>]

remove lots of completely dead code from aiclib, there's not a lot left
and even what's left is rather useless.

[I suspect the patch is too big for linux-scsi, apply from your own
inbox then]


Signed-off-by: Christoph Hellwig <hch@lst.de>

Index: scsi-misc-2.6/drivers/scsi/aic7xxx/aiclib.c
===================================================================
--- scsi-misc-2.6.orig/drivers/scsi/aic7xxx/aiclib.c	2005-08-13 13:53:51.000000000 +0200
+++ scsi-misc-2.6/drivers/scsi/aic7xxx/aiclib.c	2005-08-13 15:52:13.000000000 +0200
@@ -30,1162 +30,8 @@
  * $Id$
  */
 
-#include <linux/blkdev.h>
-#include <linux/delay.h>
-#include <linux/version.h>
-
-/* Core SCSI definitions */
-#include <scsi/scsi_host.h>
 #include "aiclib.h"
-#include "cam.h"
-
-#ifndef FALSE
-#define FALSE   0
-#endif /* FALSE */
-#ifndef TRUE
-#define TRUE    1
-#endif /* TRUE */
-#ifndef ERESTART
-#define ERESTART        -1              /* restart syscall */
-#endif
-#ifndef EJUSTRETURN
-#define EJUSTRETURN     -2              /* don't modify regs, just return */
-#endif
-
-static int	ascentrycomp(const void *key, const void *member);
-static int	senseentrycomp(const void *key, const void *member);
-static void	fetchtableentries(int sense_key, int asc, int ascq,
-				  struct scsi_inquiry_data *,
-				  const struct sense_key_table_entry **,
-				  const struct asc_table_entry **);
-static void *	scsibsearch(const void *key, const void *base, size_t nmemb,
-			    size_t size,
-			    int (*compar)(const void *, const void *));
-typedef int (cam_quirkmatch_t)(caddr_t, caddr_t);
-static int	cam_strmatch(const u_int8_t *str, const u_int8_t *pattern,
-			     int str_len);
-static caddr_t	cam_quirkmatch(caddr_t target, caddr_t quirk_table,
-			       int num_entries, int entry_size,
-			       cam_quirkmatch_t *comp_func);
-
-#define SCSI_NO_SENSE_STRINGS 1
-#if !defined(SCSI_NO_SENSE_STRINGS)
-#define SST(asc, ascq, action, desc) \
-	asc, ascq, action, desc
-#else 
-static const char empty_string[] = "";
-
-#define SST(asc, ascq, action, desc) \
-	asc, ascq, action, empty_string
-#endif 
-
-static const struct sense_key_table_entry sense_key_table[] = 
-{
-	{ SSD_KEY_NO_SENSE, SS_NOP, "NO SENSE" },
-	{ SSD_KEY_RECOVERED_ERROR, SS_NOP|SSQ_PRINT_SENSE, "RECOVERED ERROR" },
-	{
-	  SSD_KEY_NOT_READY, SS_TUR|SSQ_MANY|SSQ_DECREMENT_COUNT|EBUSY,
-	  "NOT READY"
-	},
-	{ SSD_KEY_MEDIUM_ERROR, SS_RDEF, "MEDIUM ERROR" },
-	{ SSD_KEY_HARDWARE_ERROR, SS_RDEF, "HARDWARE FAILURE" },
-	{ SSD_KEY_ILLEGAL_REQUEST, SS_FATAL|EINVAL, "ILLEGAL REQUEST" },
-	{ SSD_KEY_UNIT_ATTENTION, SS_FATAL|ENXIO, "UNIT ATTENTION" },
-	{ SSD_KEY_DATA_PROTECT, SS_FATAL|EACCES, "DATA PROTECT" },
-	{ SSD_KEY_BLANK_CHECK, SS_FATAL|ENOSPC, "BLANK CHECK" },
-	{ SSD_KEY_Vendor_Specific, SS_FATAL|EIO, "Vendor Specific" },
-	{ SSD_KEY_COPY_ABORTED, SS_FATAL|EIO, "COPY ABORTED" },
-	{ SSD_KEY_ABORTED_COMMAND, SS_RDEF, "ABORTED COMMAND" },
-	{ SSD_KEY_EQUAL, SS_NOP, "EQUAL" },
-	{ SSD_KEY_VOLUME_OVERFLOW, SS_FATAL|EIO, "VOLUME OVERFLOW" },
-	{ SSD_KEY_MISCOMPARE, SS_NOP, "MISCOMPARE" },
-	{ SSD_KEY_RESERVED, SS_FATAL|EIO, "RESERVED" }
-};
-
-static const int sense_key_table_size =
-    sizeof(sense_key_table)/sizeof(sense_key_table[0]);
-
-static struct asc_table_entry quantum_fireball_entries[] = {
-	{SST(0x04, 0x0b, SS_START|SSQ_DECREMENT_COUNT|ENXIO, 
-	     "Logical unit not ready, initializing cmd. required")}
-};
-
-static struct asc_table_entry sony_mo_entries[] = {
-	{SST(0x04, 0x00, SS_START|SSQ_DECREMENT_COUNT|ENXIO,
-	     "Logical unit not ready, cause not reportable")}
-};
-
-static struct scsi_sense_quirk_entry sense_quirk_table[] = {
-	{
-		/*
-		 * The Quantum Fireball ST and SE like to return 0x04 0x0b when
-		 * they really should return 0x04 0x02.  0x04,0x0b isn't
-		 * defined in any SCSI spec, and it isn't mentioned in the
-		 * hardware manual for these drives.
-		 */
-		{T_DIRECT, SIP_MEDIA_FIXED, "QUANTUM", "FIREBALL S*", "*"},
-		/*num_sense_keys*/0,
-		sizeof(quantum_fireball_entries)/sizeof(struct asc_table_entry),
-		/*sense key entries*/NULL,
-		quantum_fireball_entries
-	},
-	{
-		/*
-		 * This Sony MO drive likes to return 0x04, 0x00 when it
-		 * isn't spun up.
-		 */
-		{T_DIRECT, SIP_MEDIA_REMOVABLE, "SONY", "SMO-*", "*"},
-		/*num_sense_keys*/0,
-		sizeof(sony_mo_entries)/sizeof(struct asc_table_entry),
-		/*sense key entries*/NULL,
-		sony_mo_entries
-	}
-};
-
-static const int sense_quirk_table_size =
-    sizeof(sense_quirk_table)/sizeof(sense_quirk_table[0]);
 
-static struct asc_table_entry asc_table[] = {
-/*
- * From File: ASC-NUM.TXT
- * SCSI ASC/ASCQ Assignments
- * Numeric Sorted Listing
- * as of  5/12/97
- *
- * D - DIRECT ACCESS DEVICE (SBC)                     device column key
- * .T - SEQUENTIAL ACCESS DEVICE (SSC)               -------------------
- * . L - PRINTER DEVICE (SSC)                           blank = reserved
- * .  P - PROCESSOR DEVICE (SPC)                     not blank = allowed
- * .  .W - WRITE ONCE READ MULTIPLE DEVICE (SBC)
- * .  . R - CD DEVICE (MMC)
- * .  .  S - SCANNER DEVICE (SGC)
- * .  .  .O - OPTICAL MEMORY DEVICE (SBC)
- * .  .  . M - MEDIA CHANGER DEVICE (SMC)
- * .  .  .  C - COMMUNICATION DEVICE (SSC)
- * .  .  .  .A - STORAGE ARRAY DEVICE (SCC)
- * .  .  .  . E - ENCLOSURE SERVICES DEVICE (SES)
- * DTLPWRSOMCAE        ASC   ASCQ  Action  Description
- * ------------        ----  ----  ------  -----------------------------------*/
-/* DTLPWRSOMCAE */{SST(0x00, 0x00, SS_NOP,
-			"No additional sense information") },
-/*  T    S      */{SST(0x00, 0x01, SS_RDEF,
-			"Filemark detected") },
-/*  T    S      */{SST(0x00, 0x02, SS_RDEF,
-			"End-of-partition/medium detected") },
-/*  T           */{SST(0x00, 0x03, SS_RDEF,
-			"Setmark detected") },
-/*  T    S      */{SST(0x00, 0x04, SS_RDEF,
-			"Beginning-of-partition/medium detected") },
-/*  T    S      */{SST(0x00, 0x05, SS_RDEF,
-			"End-of-data detected") },
-/* DTLPWRSOMCAE */{SST(0x00, 0x06, SS_RDEF,
-			"I/O process terminated") },
-/*      R       */{SST(0x00, 0x11, SS_FATAL|EBUSY,
-			"Audio play operation in progress") },
-/*      R       */{SST(0x00, 0x12, SS_NOP,
-			"Audio play operation paused") },
-/*      R       */{SST(0x00, 0x13, SS_NOP,
-			"Audio play operation successfully completed") },
-/*      R       */{SST(0x00, 0x14, SS_RDEF,
-			"Audio play operation stopped due to error") },
-/*      R       */{SST(0x00, 0x15, SS_NOP,
-			"No current audio status to return") },
-/* DTLPWRSOMCAE */{SST(0x00, 0x16, SS_FATAL|EBUSY,
-			"Operation in progress") },
-/* DTL WRSOM AE */{SST(0x00, 0x17, SS_RDEF,
-			"Cleaning requested") },
-/* D   W  O     */{SST(0x01, 0x00, SS_RDEF,
-			"No index/sector signal") },
-/* D   WR OM    */{SST(0x02, 0x00, SS_RDEF,
-			"No seek complete") },
-/* DTL W SO     */{SST(0x03, 0x00, SS_RDEF,
-			"Peripheral device write fault") },
-/*  T           */{SST(0x03, 0x01, SS_RDEF,
-			"No write current") },
-/*  T           */{SST(0x03, 0x02, SS_RDEF,
-			"Excessive write errors") },
-/* DTLPWRSOMCAE */{SST(0x04, 0x00,
-			SS_TUR|SSQ_DELAY|SSQ_MANY|SSQ_DECREMENT_COUNT|EIO,
-			"Logical unit not ready, cause not reportable") },
-/* DTLPWRSOMCAE */{SST(0x04, 0x01,
-			SS_TUR|SSQ_DELAY|SSQ_MANY|SSQ_DECREMENT_COUNT|EBUSY,
-			"Logical unit is in process of becoming ready") },
-/* DTLPWRSOMCAE */{SST(0x04, 0x02, SS_START|SSQ_DECREMENT_COUNT|ENXIO,
-			"Logical unit not ready, initializing cmd. required") },
-/* DTLPWRSOMCAE */{SST(0x04, 0x03, SS_FATAL|ENXIO,
-			"Logical unit not ready, manual intervention required")},
-/* DTL    O     */{SST(0x04, 0x04, SS_FATAL|EBUSY,
-			"Logical unit not ready, format in progress") },
-/* DT  W  OMCA  */{SST(0x04, 0x05, SS_FATAL|EBUSY,
-			"Logical unit not ready, rebuild in progress") },
-/* DT  W  OMCA  */{SST(0x04, 0x06, SS_FATAL|EBUSY,
-			"Logical unit not ready, recalculation in progress") },
-/* DTLPWRSOMCAE */{SST(0x04, 0x07, SS_FATAL|EBUSY,
-			"Logical unit not ready, operation in progress") },
-/*      R       */{SST(0x04, 0x08, SS_FATAL|EBUSY,
-			"Logical unit not ready, long write in progress") },
-/* DTL WRSOMCAE */{SST(0x05, 0x00, SS_RDEF,
-			"Logical unit does not respond to selection") },
-/* D   WR OM    */{SST(0x06, 0x00, SS_RDEF,
-			"No reference position found") },
-/* DTL WRSOM    */{SST(0x07, 0x00, SS_RDEF,
-			"Multiple peripheral devices selected") },
-/* DTL WRSOMCAE */{SST(0x08, 0x00, SS_RDEF,
-			"Logical unit communication failure") },
-/* DTL WRSOMCAE */{SST(0x08, 0x01, SS_RDEF,
-			"Logical unit communication time-out") },
-/* DTL WRSOMCAE */{SST(0x08, 0x02, SS_RDEF,
-			"Logical unit communication parity error") },
-/* DT   R OM    */{SST(0x08, 0x03, SS_RDEF,
-			"Logical unit communication crc error (ultra-dma/32)")},
-/* DT  WR O     */{SST(0x09, 0x00, SS_RDEF,
-			"Track following error") },
-/*     WR O     */{SST(0x09, 0x01, SS_RDEF,
-			"Tracking servo failure") },
-/*     WR O     */{SST(0x09, 0x02, SS_RDEF,
-			"Focus servo failure") },
-/*     WR O     */{SST(0x09, 0x03, SS_RDEF,
-			"Spindle servo failure") },
-/* DT  WR O     */{SST(0x09, 0x04, SS_RDEF,
-			"Head select fault") },
-/* DTLPWRSOMCAE */{SST(0x0A, 0x00, SS_FATAL|ENOSPC,
-			"Error log overflow") },
-/* DTLPWRSOMCAE */{SST(0x0B, 0x00, SS_RDEF,
-			"Warning") },
-/* DTLPWRSOMCAE */{SST(0x0B, 0x01, SS_RDEF,
-			"Specified temperature exceeded") },
-/* DTLPWRSOMCAE */{SST(0x0B, 0x02, SS_RDEF,
-			"Enclosure degraded") },
-/*  T   RS      */{SST(0x0C, 0x00, SS_RDEF,
-			"Write error") },
-/* D   W  O     */{SST(0x0C, 0x01, SS_NOP|SSQ_PRINT_SENSE,
-			"Write error - recovered with auto reallocation") },
-/* D   W  O     */{SST(0x0C, 0x02, SS_RDEF,
-			"Write error - auto reallocation failed") },
-/* D   W  O     */{SST(0x0C, 0x03, SS_RDEF,
-			"Write error - recommend reassignment") },
-/* DT  W  O     */{SST(0x0C, 0x04, SS_RDEF,
-			"Compression check miscompare error") },
-/* DT  W  O     */{SST(0x0C, 0x05, SS_RDEF,
-			"Data expansion occurred during compression") },
-/* DT  W  O     */{SST(0x0C, 0x06, SS_RDEF,
-			"Block not compressible") },
-/*      R       */{SST(0x0C, 0x07, SS_RDEF,
-			"Write error - recovery needed") },
-/*      R       */{SST(0x0C, 0x08, SS_RDEF,
-			"Write error - recovery failed") },
-/*      R       */{SST(0x0C, 0x09, SS_RDEF,
-			"Write error - loss of streaming") },
-/*      R       */{SST(0x0C, 0x0A, SS_RDEF,
-			"Write error - padding blocks added") },
-/* D   W  O     */{SST(0x10, 0x00, SS_RDEF,
-			"ID CRC or ECC error") },
-/* DT  WRSO     */{SST(0x11, 0x00, SS_RDEF,
-			"Unrecovered read error") },
-/* DT  W SO     */{SST(0x11, 0x01, SS_RDEF,
-			"Read retries exhausted") },
-/* DT  W SO     */{SST(0x11, 0x02, SS_RDEF,
-			"Error too long to correct") },
-/* DT  W SO     */{SST(0x11, 0x03, SS_RDEF,
-			"Multiple read errors") },
-/* D   W  O     */{SST(0x11, 0x04, SS_RDEF,
-			"Unrecovered read error - auto reallocate failed") },
-/*     WR O     */{SST(0x11, 0x05, SS_RDEF,
-			"L-EC uncorrectable error") },
-/*     WR O     */{SST(0x11, 0x06, SS_RDEF,
-			"CIRC unrecovered error") },
-/*     W  O     */{SST(0x11, 0x07, SS_RDEF,
-			"Data re-synchronization error") },
-/*  T           */{SST(0x11, 0x08, SS_RDEF,
-			"Incomplete block read") },
-/*  T           */{SST(0x11, 0x09, SS_RDEF,
-			"No gap found") },
-/* DT     O     */{SST(0x11, 0x0A, SS_RDEF,
-			"Miscorrected error") },
-/* D   W  O     */{SST(0x11, 0x0B, SS_RDEF,
-			"Unrecovered read error - recommend reassignment") },
-/* D   W  O     */{SST(0x11, 0x0C, SS_RDEF,
-			"Unrecovered read error - recommend rewrite the data")},
-/* DT  WR O     */{SST(0x11, 0x0D, SS_RDEF,
-			"De-compression CRC error") },
-/* DT  WR O     */{SST(0x11, 0x0E, SS_RDEF,
-			"Cannot decompress using declared algorithm") },
-/*      R       */{SST(0x11, 0x0F, SS_RDEF,
-			"Error reading UPC/EAN number") },
-/*      R       */{SST(0x11, 0x10, SS_RDEF,
-			"Error reading ISRC number") },
-/*      R       */{SST(0x11, 0x11, SS_RDEF,
-			"Read error - loss of streaming") },
-/* D   W  O     */{SST(0x12, 0x00, SS_RDEF,
-			"Address mark not found for id field") },
-/* D   W  O     */{SST(0x13, 0x00, SS_RDEF,
-			"Address mark not found for data field") },
-/* DTL WRSO     */{SST(0x14, 0x00, SS_RDEF,
-			"Recorded entity not found") },
-/* DT  WR O     */{SST(0x14, 0x01, SS_RDEF,
-			"Record not found") },
-/*  T           */{SST(0x14, 0x02, SS_RDEF,
-			"Filemark or setmark not found") },
-/*  T           */{SST(0x14, 0x03, SS_RDEF,
-			"End-of-data not found") },
-/*  T           */{SST(0x14, 0x04, SS_RDEF,
-			"Block sequence error") },
-/* DT  W  O     */{SST(0x14, 0x05, SS_RDEF,
-			"Record not found - recommend reassignment") },
-/* DT  W  O     */{SST(0x14, 0x06, SS_RDEF,
-			"Record not found - data auto-reallocated") },
-/* DTL WRSOM    */{SST(0x15, 0x00, SS_RDEF,
-			"Random positioning error") },
-/* DTL WRSOM    */{SST(0x15, 0x01, SS_RDEF,
-			"Mechanical positioning error") },
-/* DT  WR O     */{SST(0x15, 0x02, SS_RDEF,
-			"Positioning error detected by read of medium") },
-/* D   W  O     */{SST(0x16, 0x00, SS_RDEF,
-			"Data synchronization mark error") },
-/* D   W  O     */{SST(0x16, 0x01, SS_RDEF,
-			"Data sync error - data rewritten") },
-/* D   W  O     */{SST(0x16, 0x02, SS_RDEF,
-			"Data sync error - recommend rewrite") },
-/* D   W  O     */{SST(0x16, 0x03, SS_NOP|SSQ_PRINT_SENSE,
-			"Data sync error - data auto-reallocated") },
-/* D   W  O     */{SST(0x16, 0x04, SS_RDEF,
-			"Data sync error - recommend reassignment") },
-/* DT  WRSO     */{SST(0x17, 0x00, SS_NOP|SSQ_PRINT_SENSE,
-			"Recovered data with no error correction applied") },
-/* DT  WRSO     */{SST(0x17, 0x01, SS_NOP|SSQ_PRINT_SENSE,
-			"Recovered data with retries") },
-/* DT  WR O     */{SST(0x17, 0x02, SS_NOP|SSQ_PRINT_SENSE,
-			"Recovered data with positive head offset") },
-/* DT  WR O     */{SST(0x17, 0x03, SS_NOP|SSQ_PRINT_SENSE,
-			"Recovered data with negative head offset") },
-/*     WR O     */{SST(0x17, 0x04, SS_NOP|SSQ_PRINT_SENSE,
-			"Recovered data with retries and/or CIRC applied") },
-/* D   WR O     */{SST(0x17, 0x05, SS_NOP|SSQ_PRINT_SENSE,
-			"Recovered data using previous sector id") },
-/* D   W  O     */{SST(0x17, 0x06, SS_NOP|SSQ_PRINT_SENSE,
-			"Recovered data without ECC - data auto-reallocated") },
-/* D   W  O     */{SST(0x17, 0x07, SS_NOP|SSQ_PRINT_SENSE,
-			"Recovered data without ECC - recommend reassignment")},
-/* D   W  O     */{SST(0x17, 0x08, SS_NOP|SSQ_PRINT_SENSE,
-			"Recovered data without ECC - recommend rewrite") },
-/* D   W  O     */{SST(0x17, 0x09, SS_NOP|SSQ_PRINT_SENSE,
-			"Recovered data without ECC - data rewritten") },
-/* D   W  O     */{SST(0x18, 0x00, SS_NOP|SSQ_PRINT_SENSE,
-			"Recovered data with error correction applied") },
-/* D   WR O     */{SST(0x18, 0x01, SS_NOP|SSQ_PRINT_SENSE,
-			"Recovered data with error corr. & retries applied") },
-/* D   WR O     */{SST(0x18, 0x02, SS_NOP|SSQ_PRINT_SENSE,
-			"Recovered data - data auto-reallocated") },
-/*      R       */{SST(0x18, 0x03, SS_NOP|SSQ_PRINT_SENSE,
-			"Recovered data with CIRC") },
-/*      R       */{SST(0x18, 0x04, SS_NOP|SSQ_PRINT_SENSE,
-			"Recovered data with L-EC") },
-/* D   WR O     */{SST(0x18, 0x05, SS_NOP|SSQ_PRINT_SENSE,
-			"Recovered data - recommend reassignment") },
-/* D   WR O     */{SST(0x18, 0x06, SS_NOP|SSQ_PRINT_SENSE,
-			"Recovered data - recommend rewrite") },
-/* D   W  O     */{SST(0x18, 0x07, SS_NOP|SSQ_PRINT_SENSE,
-			"Recovered data with ECC - data rewritten") },
-/* D      O     */{SST(0x19, 0x00, SS_RDEF,
-			"Defect list error") },
-/* D      O     */{SST(0x19, 0x01, SS_RDEF,
-			"Defect list not available") },
-/* D      O     */{SST(0x19, 0x02, SS_RDEF,
-			"Defect list error in primary list") },
-/* D      O     */{SST(0x19, 0x03, SS_RDEF,
-			"Defect list error in grown list") },
-/* DTLPWRSOMCAE */{SST(0x1A, 0x00, SS_RDEF,
-			"Parameter list length error") },
-/* DTLPWRSOMCAE */{SST(0x1B, 0x00, SS_RDEF,
-			"Synchronous data transfer error") },
-/* D      O     */{SST(0x1C, 0x00, SS_RDEF,
-			"Defect list not found") },
-/* D      O     */{SST(0x1C, 0x01, SS_RDEF,
-			"Primary defect list not found") },
-/* D      O     */{SST(0x1C, 0x02, SS_RDEF,
-			"Grown defect list not found") },
-/* D   W  O     */{SST(0x1D, 0x00, SS_FATAL,
-			"Miscompare during verify operation" )},
-/* D   W  O     */{SST(0x1E, 0x00, SS_NOP|SSQ_PRINT_SENSE,
-			"Recovered id with ecc correction") },
-/* D      O     */{SST(0x1F, 0x00, SS_RDEF,
-			"Partial defect list transfer") },
-/* DTLPWRSOMCAE */{SST(0x20, 0x00, SS_FATAL|EINVAL,
-			"Invalid command operation code") },
-/* DT  WR OM    */{SST(0x21, 0x00, SS_FATAL|EINVAL,
-			"Logical block address out of range" )},
-/* DT  WR OM    */{SST(0x21, 0x01, SS_FATAL|EINVAL,
-			"Invalid element address") },
-/* D            */{SST(0x22, 0x00, SS_FATAL|EINVAL,
-			"Illegal function") }, /* Deprecated. Use 20 00, 24 00, or 26 00 instead */
-/* DTLPWRSOMCAE */{SST(0x24, 0x00, SS_FATAL|EINVAL,
-			"Invalid field in CDB") },
-/* DTLPWRSOMCAE */{SST(0x25, 0x00, SS_FATAL|ENXIO,
-			"Logical unit not supported") },
-/* DTLPWRSOMCAE */{SST(0x26, 0x00, SS_FATAL|EINVAL,
-			"Invalid field in parameter list") },
-/* DTLPWRSOMCAE */{SST(0x26, 0x01, SS_FATAL|EINVAL,
-			"Parameter not supported") },
-/* DTLPWRSOMCAE */{SST(0x26, 0x02, SS_FATAL|EINVAL,
-			"Parameter value invalid") },
-/* DTLPWRSOMCAE */{SST(0x26, 0x03, SS_FATAL|EINVAL,
-			"Threshold parameters not supported") },
-/* DTLPWRSOMCAE */{SST(0x26, 0x04, SS_FATAL|EINVAL,
-			"Invalid release of active persistent reservation") },
-/* DT  W  O     */{SST(0x27, 0x00, SS_FATAL|EACCES,
-			"Write protected") },
-/* DT  W  O     */{SST(0x27, 0x01, SS_FATAL|EACCES,
-			"Hardware write protected") },
-/* DT  W  O     */{SST(0x27, 0x02, SS_FATAL|EACCES,
-			"Logical unit software write protected") },
-/*  T           */{SST(0x27, 0x03, SS_FATAL|EACCES,
-			"Associated write protect") },
-/*  T           */{SST(0x27, 0x04, SS_FATAL|EACCES,
-			"Persistent write protect") },
-/*  T           */{SST(0x27, 0x05, SS_FATAL|EACCES,
-			"Permanent write protect") },
-/* DTLPWRSOMCAE */{SST(0x28, 0x00, SS_RDEF,
-			"Not ready to ready change, medium may have changed") },
-/* DTLPWRSOMCAE */{SST(0x28, 0x01, SS_FATAL|ENXIO,
-			"Import or export element accessed") },
-/*
- * XXX JGibbs - All of these should use the same errno, but I don't think
- * ENXIO is the correct choice.  Should we borrow from the networking
- * errnos?  ECONNRESET anyone?
- */
-/* DTLPWRSOMCAE */{SST(0x29, 0x00, SS_RDEF,
-			"Power on, reset, or bus device reset occurred") },
-/* DTLPWRSOMCAE */{SST(0x29, 0x01, SS_RDEF,
-			"Power on occurred") },
-/* DTLPWRSOMCAE */{SST(0x29, 0x02, SS_RDEF,
-			"Scsi bus reset occurred") },
-/* DTLPWRSOMCAE */{SST(0x29, 0x03, SS_RDEF,
-			"Bus device reset function occurred") },
-/* DTLPWRSOMCAE */{SST(0x29, 0x04, SS_RDEF,
-			"Device internal reset") },
-/* DTLPWRSOMCAE */{SST(0x29, 0x05, SS_RDEF,
-			"Transceiver mode changed to single-ended") },
-/* DTLPWRSOMCAE */{SST(0x29, 0x06, SS_RDEF,
-			"Transceiver mode changed to LVD") },
-/* DTL WRSOMCAE */{SST(0x2A, 0x00, SS_RDEF,
-			"Parameters changed") },
-/* DTL WRSOMCAE */{SST(0x2A, 0x01, SS_RDEF,
-			"Mode parameters changed") },
-/* DTL WRSOMCAE */{SST(0x2A, 0x02, SS_RDEF,
-			"Log parameters changed") },
-/* DTLPWRSOMCAE */{SST(0x2A, 0x03, SS_RDEF,
-			"Reservations preempted") },
-/* DTLPWRSO C   */{SST(0x2B, 0x00, SS_RDEF,
-			"Copy cannot execute since host cannot disconnect") },
-/* DTLPWRSOMCAE */{SST(0x2C, 0x00, SS_RDEF,
-			"Command sequence error") },
-/*       S      */{SST(0x2C, 0x01, SS_RDEF,
-			"Too many windows specified") },
-/*       S      */{SST(0x2C, 0x02, SS_RDEF,
-			"Invalid combination of windows specified") },
-/*      R       */{SST(0x2C, 0x03, SS_RDEF,
-			"Current program area is not empty") },
-/*      R       */{SST(0x2C, 0x04, SS_RDEF,
-			"Current program area is empty") },
-/*  T           */{SST(0x2D, 0x00, SS_RDEF,
-			"Overwrite error on update in place") },
-/* DTLPWRSOMCAE */{SST(0x2F, 0x00, SS_RDEF,
-			"Commands cleared by another initiator") },
-/* DT  WR OM    */{SST(0x30, 0x00, SS_RDEF,
-			"Incompatible medium installed") },
-/* DT  WR O     */{SST(0x30, 0x01, SS_RDEF,
-			"Cannot read medium - unknown format") },
-/* DT  WR O     */{SST(0x30, 0x02, SS_RDEF,
-			"Cannot read medium - incompatible format") },
-/* DT           */{SST(0x30, 0x03, SS_RDEF,
-			"Cleaning cartridge installed") },
-/* DT  WR O     */{SST(0x30, 0x04, SS_RDEF,
-			"Cannot write medium - unknown format") },
-/* DT  WR O     */{SST(0x30, 0x05, SS_RDEF,
-			"Cannot write medium - incompatible format") },
-/* DT  W  O     */{SST(0x30, 0x06, SS_RDEF,
-			"Cannot format medium - incompatible medium") },
-/* DTL WRSOM AE */{SST(0x30, 0x07, SS_RDEF,
-			"Cleaning failure") },
-/*      R       */{SST(0x30, 0x08, SS_RDEF,
-			"Cannot write - application code mismatch") },
-/*      R       */{SST(0x30, 0x09, SS_RDEF,
-			"Current session not fixated for append") },
-/* DT  WR O     */{SST(0x31, 0x00, SS_RDEF,
-			"Medium format corrupted") },
-/* D L  R O     */{SST(0x31, 0x01, SS_RDEF,
-			"Format command failed") },
-/* D   W  O     */{SST(0x32, 0x00, SS_RDEF,
-			"No defect spare location available") },
-/* D   W  O     */{SST(0x32, 0x01, SS_RDEF,
-			"Defect list update failure") },
-/*  T           */{SST(0x33, 0x00, SS_RDEF,
-			"Tape length error") },
-/* DTLPWRSOMCAE */{SST(0x34, 0x00, SS_RDEF,
-			"Enclosure failure") },
-/* DTLPWRSOMCAE */{SST(0x35, 0x00, SS_RDEF,
-			"Enclosure services failure") },
-/* DTLPWRSOMCAE */{SST(0x35, 0x01, SS_RDEF,
-			"Unsupported enclosure function") },
-/* DTLPWRSOMCAE */{SST(0x35, 0x02, SS_RDEF,
-			"Enclosure services unavailable") },
-/* DTLPWRSOMCAE */{SST(0x35, 0x03, SS_RDEF,
-			"Enclosure services transfer failure") },
-/* DTLPWRSOMCAE */{SST(0x35, 0x04, SS_RDEF,
-			"Enclosure services transfer refused") },
-/*   L          */{SST(0x36, 0x00, SS_RDEF,
-			"Ribbon, ink, or toner failure") },
-/* DTL WRSOMCAE */{SST(0x37, 0x00, SS_RDEF,
-			"Rounded parameter") },
-/* DTL WRSOMCAE */{SST(0x39, 0x00, SS_RDEF,
-			"Saving parameters not supported") },
-/* DTL WRSOM    */{SST(0x3A, 0x00, SS_NOP,
-			"Medium not present") },
-/* DT  WR OM    */{SST(0x3A, 0x01, SS_NOP,
-			"Medium not present - tray closed") },
-/* DT  WR OM    */{SST(0x3A, 0x01, SS_NOP,
-			"Medium not present - tray open") },
-/* DT  WR OM    */{SST(0x3A, 0x03, SS_NOP,
-			"Medium not present - Loadable") },
-/* DT  WR OM    */{SST(0x3A, 0x04, SS_NOP,
-			"Medium not present - medium auxiliary "
-			"memory accessible") },
-/* DT  WR OM    */{SST(0x3A, 0xFF, SS_NOP, NULL) },/* Range 0x05->0xFF */
-/*  TL          */{SST(0x3B, 0x00, SS_RDEF,
-			"Sequential positioning error") },
-/*  T           */{SST(0x3B, 0x01, SS_RDEF,
-			"Tape position error at beginning-of-medium") },
-/*  T           */{SST(0x3B, 0x02, SS_RDEF,
-			"Tape position error at end-of-medium") },
-/*   L          */{SST(0x3B, 0x03, SS_RDEF,
-			"Tape or electronic vertical forms unit not ready") },
-/*   L          */{SST(0x3B, 0x04, SS_RDEF,
-			"Slew failure") },
-/*   L          */{SST(0x3B, 0x05, SS_RDEF,
-			"Paper jam") },
-/*   L          */{SST(0x3B, 0x06, SS_RDEF,
-			"Failed to sense top-of-form") },
-/*   L          */{SST(0x3B, 0x07, SS_RDEF,
-			"Failed to sense bottom-of-form") },
-/*  T           */{SST(0x3B, 0x08, SS_RDEF,
-			"Reposition error") },
-/*       S      */{SST(0x3B, 0x09, SS_RDEF,
-			"Read past end of medium") },
-/*       S      */{SST(0x3B, 0x0A, SS_RDEF,
-			"Read past beginning of medium") },
-/*       S      */{SST(0x3B, 0x0B, SS_RDEF,
-			"Position past end of medium") },
-/*  T    S      */{SST(0x3B, 0x0C, SS_RDEF,
-			"Position past beginning of medium") },
-/* DT  WR OM    */{SST(0x3B, 0x0D, SS_FATAL|ENOSPC,
-			"Medium destination element full") },
-/* DT  WR OM    */{SST(0x3B, 0x0E, SS_RDEF,
-			"Medium source element empty") },
-/*      R       */{SST(0x3B, 0x0F, SS_RDEF,
-			"End of medium reached") },
-/* DT  WR OM    */{SST(0x3B, 0x11, SS_RDEF,
-			"Medium magazine not accessible") },
-/* DT  WR OM    */{SST(0x3B, 0x12, SS_RDEF,
-			"Medium magazine removed") },
-/* DT  WR OM    */{SST(0x3B, 0x13, SS_RDEF,
-			"Medium magazine inserted") },
-/* DT  WR OM    */{SST(0x3B, 0x14, SS_RDEF,
-			"Medium magazine locked") },
-/* DT  WR OM    */{SST(0x3B, 0x15, SS_RDEF,
-			"Medium magazine unlocked") },
-/* DTLPWRSOMCAE */{SST(0x3D, 0x00, SS_RDEF,
-			"Invalid bits in identify message") },
-/* DTLPWRSOMCAE */{SST(0x3E, 0x00, SS_RDEF,
-			"Logical unit has not self-configured yet") },
-/* DTLPWRSOMCAE */{SST(0x3E, 0x01, SS_RDEF,
-			"Logical unit failure") },
-/* DTLPWRSOMCAE */{SST(0x3E, 0x02, SS_RDEF,
-			"Timeout on logical unit") },
-/* DTLPWRSOMCAE */{SST(0x3F, 0x00, SS_RDEF,
-			"Target operating conditions have changed") },
-/* DTLPWRSOMCAE */{SST(0x3F, 0x01, SS_RDEF,
-			"Microcode has been changed") },
-/* DTLPWRSOMC   */{SST(0x3F, 0x02, SS_RDEF,
-			"Changed operating definition") },
-/* DTLPWRSOMCAE */{SST(0x3F, 0x03, SS_INQ_REFRESH|SSQ_DECREMENT_COUNT,
-			"Inquiry data has changed") },
-/* DT  WR OMCAE */{SST(0x3F, 0x04, SS_RDEF,
-			"Component device attached") },
-/* DT  WR OMCAE */{SST(0x3F, 0x05, SS_RDEF,
-			"Device identifier changed") },
-/* DT  WR OMCAE */{SST(0x3F, 0x06, SS_RDEF,
-			"Redundancy group created or modified") },
-/* DT  WR OMCAE */{SST(0x3F, 0x07, SS_RDEF,
-			"Redundancy group deleted") },
-/* DT  WR OMCAE */{SST(0x3F, 0x08, SS_RDEF,
-			"Spare created or modified") },
-/* DT  WR OMCAE */{SST(0x3F, 0x09, SS_RDEF,
-			"Spare deleted") },
-/* DT  WR OMCAE */{SST(0x3F, 0x0A, SS_RDEF,
-			"Volume set created or modified") },
-/* DT  WR OMCAE */{SST(0x3F, 0x0B, SS_RDEF,
-			"Volume set deleted") },
-/* DT  WR OMCAE */{SST(0x3F, 0x0C, SS_RDEF,
-			"Volume set deassigned") },
-/* DT  WR OMCAE */{SST(0x3F, 0x0D, SS_RDEF,
-			"Volume set reassigned") },
-/* DTLPWRSOMCAE */{SST(0x3F, 0x0E, SS_RDEF,
-			"Reported luns data has changed") },
-/* DTLPWRSOMCAE */{SST(0x3F, 0x0F, SS_RETRY|SSQ_DECREMENT_COUNT
-				 | SSQ_DELAY_RANDOM|EBUSY,
-			"Echo buffer overwritten") },
-/* DT  WR OM   B*/{SST(0x3F, 0x0F, SS_RDEF, "Medium Loadable") },
-/* DT  WR OM   B*/{SST(0x3F, 0x0F, SS_RDEF,
-			"Medium auxiliary memory accessible") },
-/* D            */{SST(0x40, 0x00, SS_RDEF,
-			"Ram failure") }, /* deprecated - use 40 NN instead */
-/* DTLPWRSOMCAE */{SST(0x40, 0x80, SS_RDEF,
-			"Diagnostic failure: ASCQ = Component ID") },
-/* DTLPWRSOMCAE */{SST(0x40, 0xFF, SS_RDEF|SSQ_RANGE,
-			NULL) },/* Range 0x80->0xFF */
-/* D            */{SST(0x41, 0x00, SS_RDEF,
-			"Data path failure") }, /* deprecated - use 40 NN instead */
-/* D            */{SST(0x42, 0x00, SS_RDEF,
-			"Power-on or self-test failure") }, /* deprecated - use 40 NN instead */
-/* DTLPWRSOMCAE */{SST(0x43, 0x00, SS_RDEF,
-			"Message error") },
-/* DTLPWRSOMCAE */{SST(0x44, 0x00, SS_RDEF,
-			"Internal target failure") },
-/* DTLPWRSOMCAE */{SST(0x45, 0x00, SS_RDEF,
-			"Select or reselect failure") },
-/* DTLPWRSOMC   */{SST(0x46, 0x00, SS_RDEF,
-			"Unsuccessful soft reset") },
-/* DTLPWRSOMCAE */{SST(0x47, 0x00, SS_RDEF|SSQ_FALLBACK,
-			"SCSI parity error") },
-/* DTLPWRSOMCAE */{SST(0x47, 0x01, SS_RDEF|SSQ_FALLBACK,
-			"Data Phase CRC error detected") },
-/* DTLPWRSOMCAE */{SST(0x47, 0x02, SS_RDEF|SSQ_FALLBACK,
-			"SCSI parity error detected during ST data phase") },
-/* DTLPWRSOMCAE */{SST(0x47, 0x03, SS_RDEF|SSQ_FALLBACK,
-			"Information Unit iuCRC error") },
-/* DTLPWRSOMCAE */{SST(0x47, 0x04, SS_RDEF|SSQ_FALLBACK,
-			"Asynchronous information protection error detected") },
-/* DTLPWRSOMCAE */{SST(0x47, 0x05, SS_RDEF|SSQ_FALLBACK,
-			"Protocol server CRC error") },
-/* DTLPWRSOMCAE */{SST(0x48, 0x00, SS_RDEF|SSQ_FALLBACK,
-			"Initiator detected error message received") },
-/* DTLPWRSOMCAE */{SST(0x49, 0x00, SS_RDEF,
-			"Invalid message error") },
-/* DTLPWRSOMCAE */{SST(0x4A, 0x00, SS_RDEF,
-			"Command phase error") },
-/* DTLPWRSOMCAE */{SST(0x4B, 0x00, SS_RDEF,
-			"Data phase error") },
-/* DTLPWRSOMCAE */{SST(0x4C, 0x00, SS_RDEF,
-			"Logical unit failed self-configuration") },
-/* DTLPWRSOMCAE */{SST(0x4D, 0x00, SS_RDEF,
-			"Tagged overlapped commands: ASCQ = Queue tag ID") },
-/* DTLPWRSOMCAE */{SST(0x4D, 0xFF, SS_RDEF|SSQ_RANGE,
-			NULL)}, /* Range 0x00->0xFF */
-/* DTLPWRSOMCAE */{SST(0x4E, 0x00, SS_RDEF,
-			"Overlapped commands attempted") },
-/*  T           */{SST(0x50, 0x00, SS_RDEF,
-			"Write append error") },
-/*  T           */{SST(0x50, 0x01, SS_RDEF,
-			"Write append position error") },
-/*  T           */{SST(0x50, 0x02, SS_RDEF,
-			"Position error related to timing") },
-/*  T     O     */{SST(0x51, 0x00, SS_RDEF,
-			"Erase failure") },
-/*  T           */{SST(0x52, 0x00, SS_RDEF,
-			"Cartridge fault") },
-/* DTL WRSOM    */{SST(0x53, 0x00, SS_RDEF,
-			"Media load or eject failed") },
-/*  T           */{SST(0x53, 0x01, SS_RDEF,
-			"Unload tape failure") },
-/* DT  WR OM    */{SST(0x53, 0x02, SS_RDEF,
-			"Medium removal prevented") },
-/*    P         */{SST(0x54, 0x00, SS_RDEF,
-			"Scsi to host system interface failure") },
-/*    P         */{SST(0x55, 0x00, SS_RDEF,
-			"System resource failure") },
-/* D      O     */{SST(0x55, 0x01, SS_FATAL|ENOSPC,
-			"System buffer full") },
-/*      R       */{SST(0x57, 0x00, SS_RDEF,
-			"Unable to recover table-of-contents") },
-/*        O     */{SST(0x58, 0x00, SS_RDEF,
-			"Generation does not exist") },
-/*        O     */{SST(0x59, 0x00, SS_RDEF,
-			"Updated block read") },
-/* DTLPWRSOM    */{SST(0x5A, 0x00, SS_RDEF,
-			"Operator request or state change input") },
-/* DT  WR OM    */{SST(0x5A, 0x01, SS_RDEF,
-			"Operator medium removal request") },
-/* DT  W  O     */{SST(0x5A, 0x02, SS_RDEF,
-			"Operator selected write protect") },
-/* DT  W  O     */{SST(0x5A, 0x03, SS_RDEF,
-			"Operator selected write permit") },
-/* DTLPWRSOM    */{SST(0x5B, 0x00, SS_RDEF,
-			"Log exception") },
-/* DTLPWRSOM    */{SST(0x5B, 0x01, SS_RDEF,
-			"Threshold condition met") },
-/* DTLPWRSOM    */{SST(0x5B, 0x02, SS_RDEF,
-			"Log counter at maximum") },
-/* DTLPWRSOM    */{SST(0x5B, 0x03, SS_RDEF,
-			"Log list codes exhausted") },
-/* D      O     */{SST(0x5C, 0x00, SS_RDEF,
-			"RPL status change") },
-/* D      O     */{SST(0x5C, 0x01, SS_NOP|SSQ_PRINT_SENSE,
-			"Spindles synchronized") },
-/* D      O     */{SST(0x5C, 0x02, SS_RDEF,
-			"Spindles not synchronized") },
-/* DTLPWRSOMCAE */{SST(0x5D, 0x00, SS_RDEF,
-			"Failure prediction threshold exceeded") },
-/* DTLPWRSOMCAE */{SST(0x5D, 0xFF, SS_RDEF,
-			"Failure prediction threshold exceeded (false)") },
-/* DTLPWRSO CA  */{SST(0x5E, 0x00, SS_RDEF,
-			"Low power condition on") },
-/* DTLPWRSO CA  */{SST(0x5E, 0x01, SS_RDEF,
-			"Idle condition activated by timer") },
-/* DTLPWRSO CA  */{SST(0x5E, 0x02, SS_RDEF,
-			"Standby condition activated by timer") },
-/* DTLPWRSO CA  */{SST(0x5E, 0x03, SS_RDEF,
-			"Idle condition activated by command") },
-/* DTLPWRSO CA  */{SST(0x5E, 0x04, SS_RDEF,
-			"Standby condition activated by command") },
-/*       S      */{SST(0x60, 0x00, SS_RDEF,
-			"Lamp failure") },
-/*       S      */{SST(0x61, 0x00, SS_RDEF,
-			"Video acquisition error") },
-/*       S      */{SST(0x61, 0x01, SS_RDEF,
-			"Unable to acquire video") },
-/*       S      */{SST(0x61, 0x02, SS_RDEF,
-			"Out of focus") },
-/*       S      */{SST(0x62, 0x00, SS_RDEF,
-			"Scan head positioning error") },
-/*      R       */{SST(0x63, 0x00, SS_RDEF,
-			"End of user area encountered on this track") },
-/*      R       */{SST(0x63, 0x01, SS_FATAL|ENOSPC,
-			"Packet does not fit in available space") },
-/*      R       */{SST(0x64, 0x00, SS_RDEF,
-			"Illegal mode for this track") },
-/*      R       */{SST(0x64, 0x01, SS_RDEF,
-			"Invalid packet size") },
-/* DTLPWRSOMCAE */{SST(0x65, 0x00, SS_RDEF,
-			"Voltage fault") },
-/*       S      */{SST(0x66, 0x00, SS_RDEF,
-			"Automatic document feeder cover up") },
-/*       S      */{SST(0x66, 0x01, SS_RDEF,
-			"Automatic document feeder lift up") },
-/*       S      */{SST(0x66, 0x02, SS_RDEF,
-			"Document jam in automatic document feeder") },
-/*       S      */{SST(0x66, 0x03, SS_RDEF,
-			"Document miss feed automatic in document feeder") },
-/*           A  */{SST(0x67, 0x00, SS_RDEF,
-			"Configuration failure") },
-/*           A  */{SST(0x67, 0x01, SS_RDEF,
-			"Configuration of incapable logical units failed") },
-/*           A  */{SST(0x67, 0x02, SS_RDEF,
-			"Add logical unit failed") },
-/*           A  */{SST(0x67, 0x03, SS_RDEF,
-			"Modification of logical unit failed") },
-/*           A  */{SST(0x67, 0x04, SS_RDEF,
-			"Exchange of logical unit failed") },
-/*           A  */{SST(0x67, 0x05, SS_RDEF,
-			"Remove of logical unit failed") },
-/*           A  */{SST(0x67, 0x06, SS_RDEF,
-			"Attachment of logical unit failed") },
-/*           A  */{SST(0x67, 0x07, SS_RDEF,
-			"Creation of logical unit failed") },
-/*           A  */{SST(0x68, 0x00, SS_RDEF,
-			"Logical unit not configured") },
-/*           A  */{SST(0x69, 0x00, SS_RDEF,
-			"Data loss on logical unit") },
-/*           A  */{SST(0x69, 0x01, SS_RDEF,
-			"Multiple logical unit failures") },
-/*           A  */{SST(0x69, 0x02, SS_RDEF,
-			"Parity/data mismatch") },
-/*           A  */{SST(0x6A, 0x00, SS_RDEF,
-			"Informational, refer to log") },
-/*           A  */{SST(0x6B, 0x00, SS_RDEF,
-			"State change has occurred") },
-/*           A  */{SST(0x6B, 0x01, SS_RDEF,
-			"Redundancy level got better") },
-/*           A  */{SST(0x6B, 0x02, SS_RDEF,
-			"Redundancy level got worse") },
-/*           A  */{SST(0x6C, 0x00, SS_RDEF,
-			"Rebuild failure occurred") },
-/*           A  */{SST(0x6D, 0x00, SS_RDEF,
-			"Recalculate failure occurred") },
-/*           A  */{SST(0x6E, 0x00, SS_RDEF,
-			"Command to logical unit failed") },
-/*  T           */{SST(0x70, 0x00, SS_RDEF,
-			"Decompression exception short: ASCQ = Algorithm ID") },
-/*  T           */{SST(0x70, 0xFF, SS_RDEF|SSQ_RANGE,
-			NULL) }, /* Range 0x00 -> 0xFF */
-/*  T           */{SST(0x71, 0x00, SS_RDEF,
-			"Decompression exception long: ASCQ = Algorithm ID") },
-/*  T           */{SST(0x71, 0xFF, SS_RDEF|SSQ_RANGE,
-			NULL) }, /* Range 0x00 -> 0xFF */	
-/*      R       */{SST(0x72, 0x00, SS_RDEF,
-			"Session fixation error") },
-/*      R       */{SST(0x72, 0x01, SS_RDEF,
-			"Session fixation error writing lead-in") },
-/*      R       */{SST(0x72, 0x02, SS_RDEF,
-			"Session fixation error writing lead-out") },
-/*      R       */{SST(0x72, 0x03, SS_RDEF,
-			"Session fixation error - incomplete track in session") },
-/*      R       */{SST(0x72, 0x04, SS_RDEF,
-			"Empty or partially written reserved track") },
-/*      R       */{SST(0x73, 0x00, SS_RDEF,
-			"CD control error") },
-/*      R       */{SST(0x73, 0x01, SS_RDEF,
-			"Power calibration area almost full") },
-/*      R       */{SST(0x73, 0x02, SS_FATAL|ENOSPC,
-			"Power calibration area is full") },
-/*      R       */{SST(0x73, 0x03, SS_RDEF,
-			"Power calibration area error") },
-/*      R       */{SST(0x73, 0x04, SS_RDEF,
-			"Program memory area update failure") },
-/*      R       */{SST(0x73, 0x05, SS_RDEF,
-			"program memory area is full") }
-};
-
-static const int asc_table_size = sizeof(asc_table)/sizeof(asc_table[0]);
-
-struct asc_key
-{
-	int asc;
-	int ascq;
-};
-
-static int
-ascentrycomp(const void *key, const void *member)
-{
-	int asc;
-	int ascq;
-	const struct asc_table_entry *table_entry;
-
-	asc = ((const struct asc_key *)key)->asc;
-	ascq = ((const struct asc_key *)key)->ascq;
-	table_entry = (const struct asc_table_entry *)member;
-
-	if (asc >= table_entry->asc) {
-
-		if (asc > table_entry->asc)
-			return (1);
-
-		if (ascq <= table_entry->ascq) {
-			/* Check for ranges */
-			if (ascq == table_entry->ascq
-		 	 || ((table_entry->action & SSQ_RANGE) != 0
-		  	   && ascq >= (table_entry - 1)->ascq))
-				return (0);
-			return (-1);
-		}
-		return (1);
-	}
-	return (-1);
-}
-
-static int
-senseentrycomp(const void *key, const void *member)
-{
-	int sense_key;
-	const struct sense_key_table_entry *table_entry;
-
-	sense_key = *((const int *)key);
-	table_entry = (const struct sense_key_table_entry *)member;
-
-	if (sense_key >= table_entry->sense_key) {
-		if (sense_key == table_entry->sense_key)
-			return (0);
-		return (1);
-	}
-	return (-1);
-}
-
-static void
-fetchtableentries(int sense_key, int asc, int ascq,
-		  struct scsi_inquiry_data *inq_data,
-		  const struct sense_key_table_entry **sense_entry,
-		  const struct asc_table_entry **asc_entry)
-{
-	void *match;
-	const struct asc_table_entry *asc_tables[2];
-	const struct sense_key_table_entry *sense_tables[2];
-	struct asc_key asc_ascq;
-	size_t asc_tables_size[2];
-	size_t sense_tables_size[2];
-	int num_asc_tables;
-	int num_sense_tables;
-	int i;
-
-	/* Default to failure */
-	*sense_entry = NULL;
-	*asc_entry = NULL;
-	match = NULL;
-	if (inq_data != NULL)
-		match = cam_quirkmatch((void *)inq_data,
-				       (void *)sense_quirk_table,
-				       sense_quirk_table_size,
-				       sizeof(*sense_quirk_table),
-				       aic_inquiry_match);
-
-	if (match != NULL) {
-		struct scsi_sense_quirk_entry *quirk;
-
-		quirk = (struct scsi_sense_quirk_entry *)match;
-		asc_tables[0] = quirk->asc_info;
-		asc_tables_size[0] = quirk->num_ascs;
-		asc_tables[1] = asc_table;
-		asc_tables_size[1] = asc_table_size;
-		num_asc_tables = 2;
-		sense_tables[0] = quirk->sense_key_info;
-		sense_tables_size[0] = quirk->num_sense_keys;
-		sense_tables[1] = sense_key_table;
-		sense_tables_size[1] = sense_key_table_size;
-		num_sense_tables = 2;
-	} else {
-		asc_tables[0] = asc_table;
-		asc_tables_size[0] = asc_table_size;
-		num_asc_tables = 1;
-		sense_tables[0] = sense_key_table;
-		sense_tables_size[0] = sense_key_table_size;
-		num_sense_tables = 1;
-	}
-
-	asc_ascq.asc = asc;
-	asc_ascq.ascq = ascq;
-	for (i = 0; i < num_asc_tables; i++) {
-		void *found_entry;
-
-		found_entry = scsibsearch(&asc_ascq, asc_tables[i],
-					  asc_tables_size[i],
-					  sizeof(**asc_tables),
-					  ascentrycomp);
-
-		if (found_entry) {
-			*asc_entry = (struct asc_table_entry *)found_entry;
-			break;
-		}
-	}
-
-	for (i = 0; i < num_sense_tables; i++) {
-		void *found_entry;
-
-		found_entry = scsibsearch(&sense_key, sense_tables[i],
-					  sense_tables_size[i],
-					  sizeof(**sense_tables),
-					  senseentrycomp);
-
-		if (found_entry) {
-			*sense_entry =
-			    (struct sense_key_table_entry *)found_entry;
-			break;
-		}
-	}
-}
-
-static void *
-scsibsearch(const void *key, const void *base, size_t nmemb, size_t size,
-		 int (*compar)(const void *, const void *))
-{
-	const void *entry;
-	u_int l;
-	u_int u;
-	u_int m;
-
-	l = -1;
-	u = nmemb;
-	while (l + 1 != u) {
-		m = (l + u) / 2;
-		entry = base + m * size;
-		if (compar(key, entry) > 0)
-			l = m;
-		else
-			u = m;
-	}
-
-	entry = base + u * size;
-	if (u == nmemb
-	 || compar(key, entry) != 0)
-		return (NULL);
-
-	return ((void *)entry);
-}
-
-/*
- * Compare string with pattern, returning 0 on match.
- * Short pattern matches trailing blanks in name,
- * wildcard '*' in pattern matches rest of name,
- * wildcard '?' matches a single non-space character.
- */
-static int
-cam_strmatch(const uint8_t *str, const uint8_t *pattern, int str_len)
-{
-
-	while (*pattern != '\0'&& str_len > 0) {  
-
-		if (*pattern == '*') {
-			return (0);
-		}
-		if ((*pattern != *str)
-		 && (*pattern != '?' || *str == ' ')) {
-			return (1);
-		}
-		pattern++;
-		str++;
-		str_len--;
-	}
-	while (str_len > 0 && *str++ == ' ')
-		str_len--;
-
-	return (str_len);
-}
-
-static caddr_t
-cam_quirkmatch(caddr_t target, caddr_t quirk_table, int num_entries,
-	       int entry_size, cam_quirkmatch_t *comp_func)
-{
-	for (; num_entries > 0; num_entries--, quirk_table += entry_size) {
-		if ((*comp_func)(target, quirk_table) == 0)
-			return (quirk_table);
-	}
-	return (NULL);
-}
-
-void
-aic_sense_desc(int sense_key, int asc, int ascq,
-	       struct scsi_inquiry_data *inq_data,
-	       const char **sense_key_desc, const char **asc_desc)
-{
-	const struct asc_table_entry *asc_entry;
-	const struct sense_key_table_entry *sense_entry;
-
-	fetchtableentries(sense_key, asc, ascq,
-			  inq_data,
-			  &sense_entry,
-			  &asc_entry);
-
-	*sense_key_desc = sense_entry->desc;
-
-	if (asc_entry != NULL)
-		*asc_desc = asc_entry->desc;
-	else if (asc >= 0x80 && asc <= 0xff)
-		*asc_desc = "Vendor Specific ASC";
-	else if (ascq >= 0x80 && ascq <= 0xff)
-		*asc_desc = "Vendor Specific ASCQ";
-	else
-		*asc_desc = "Reserved ASC/ASCQ pair";
-}
-
-/*
- * Given sense and device type information, return the appropriate action.
- * If we do not understand the specific error as identified by the ASC/ASCQ
- * pair, fall back on the more generic actions derived from the sense key.
- */
-aic_sense_action
-aic_sense_error_action(struct scsi_sense_data *sense_data,
-		       struct scsi_inquiry_data *inq_data, uint32_t sense_flags)
-{
-	const struct asc_table_entry *asc_entry;
-	const struct sense_key_table_entry *sense_entry;
-	int error_code, sense_key, asc, ascq;
-	aic_sense_action action;
-
-	scsi_extract_sense(sense_data, &error_code, &sense_key, &asc, &ascq);
-
-	if (error_code == SSD_DEFERRED_ERROR) {
-		/*
-		 * XXX dufault@FreeBSD.org
-		 * This error doesn't relate to the command associated
-		 * with this request sense.  A deferred error is an error
-		 * for a command that has already returned GOOD status
-		 * (see SCSI2 8.2.14.2).
-		 *
-		 * By my reading of that section, it looks like the current
-		 * command has been cancelled, we should now clean things up
-		 * (hopefully recovering any lost data) and then retry the
-		 * current command.  There are two easy choices, both wrong:
-		 *
-		 * 1. Drop through (like we had been doing), thus treating
-		 *    this as if the error were for the current command and
-		 *    return and stop the current command.
-		 * 
-		 * 2. Issue a retry (like I made it do) thus hopefully
-		 *    recovering the current transfer, and ignoring the
-		 *    fact that we've dropped a command.
-		 *
-		 * These should probably be handled in a device specific
-		 * sense handler or punted back up to a user mode daemon
-		 */
-		action = SS_RETRY|SSQ_DECREMENT_COUNT|SSQ_PRINT_SENSE;
-	} else {
-		fetchtableentries(sense_key, asc, ascq,
-				  inq_data,
-				  &sense_entry,
-				  &asc_entry);
-
-		/*
-		 * Override the 'No additional Sense' entry (0,0)
-		 * with the error action of the sense key.
-		 */
-		if (asc_entry != NULL
-		 && (asc != 0 || ascq != 0))
-			action = asc_entry->action;
-		else
-			action = sense_entry->action;
-
-		if (sense_key == SSD_KEY_RECOVERED_ERROR) {
-			/*
-			 * The action succeeded but the device wants
-			 * the user to know that some recovery action
-			 * was required.
-			 */
-			action &= ~(SS_MASK|SSQ_MASK|SS_ERRMASK);
-			action |= SS_NOP|SSQ_PRINT_SENSE;
-		} else if (sense_key == SSD_KEY_ILLEGAL_REQUEST) {
-			if ((sense_flags & SF_QUIET_IR) != 0)
-				action &= ~SSQ_PRINT_SENSE;
-		} else if (sense_key == SSD_KEY_UNIT_ATTENTION) {
-			if ((sense_flags & SF_RETRY_UA) != 0
-			 && (action & SS_MASK) == SS_FAIL) {
-				action &= ~(SS_MASK|SSQ_MASK);
-				action |= SS_RETRY|SSQ_DECREMENT_COUNT|
-					  SSQ_PRINT_SENSE;
-			}
-		}
-	}
-
-	if ((sense_flags & SF_PRINT_ALWAYS) != 0)
-		action |= SSQ_PRINT_SENSE;
-	else if ((sense_flags & SF_NO_PRINT) != 0)
-		action &= ~SSQ_PRINT_SENSE;
-
-	return (action);
-}
-
-/*      
- * Try make as good a match as possible with
- * available sub drivers
- */
-int
-aic_inquiry_match(caddr_t inqbuffer, caddr_t table_entry)
-{
-	struct scsi_inquiry_pattern *entry;
-	struct scsi_inquiry_data *inq;
- 
-	entry = (struct scsi_inquiry_pattern *)table_entry;
-	inq = (struct scsi_inquiry_data *)inqbuffer;
-
-	if (((SID_TYPE(inq) == entry->type)
-	  || (entry->type == T_ANY))
-	 && (SID_IS_REMOVABLE(inq) ? entry->media_type & SIP_MEDIA_REMOVABLE
-				   : entry->media_type & SIP_MEDIA_FIXED)
-	 && (cam_strmatch(inq->vendor, entry->vendor, sizeof(inq->vendor)) == 0)
-	 && (cam_strmatch(inq->product, entry->product,
-			  sizeof(inq->product)) == 0)
-	 && (cam_strmatch(inq->revision, entry->revision,
-			  sizeof(inq->revision)) == 0)) {
-		return (0);
-	}
-        return (-1);
-}
 
 /*
  * Table of syncrates that don't follow the "divisible by 4"
@@ -1229,108 +75,6 @@
 	return (10000000 / (period_factor * 4 * 10));
 }
 
-/*
- * Return speed in KB/s.
- */
-u_int
-aic_calc_speed(u_int width, u_int period, u_int offset, u_int min_rate)
-{
-	u_int freq;
-
-	if (offset != 0 && period < min_rate)
-		freq  = aic_calc_syncsrate(period);
-	else
-		/* Roughly 3.3MB/s for async */
-		freq  = 3300;
-	freq <<= width;
-	return (freq);
-}
-
-uint32_t
-aic_error_action(struct scsi_cmnd *cmd, struct scsi_inquiry_data *inq_data,
-		 cam_status status, u_int scsi_status)
-{
-	aic_sense_action  err_action;
-	int		  sense;
-
-	sense  = (cmd->result >> 24) == DRIVER_SENSE;
-
-	switch (status) {
-	case CAM_REQ_CMP:
-		err_action = SS_NOP;
-		break;
-	case CAM_AUTOSENSE_FAIL:
-	case CAM_SCSI_STATUS_ERROR:
-
-		switch (scsi_status) {
-		case SCSI_STATUS_OK:
-		case SCSI_STATUS_COND_MET:
-		case SCSI_STATUS_INTERMED:
-		case SCSI_STATUS_INTERMED_COND_MET:
-			err_action = SS_NOP;
-			break;
-		case SCSI_STATUS_CMD_TERMINATED:
-		case SCSI_STATUS_CHECK_COND:
-			if (sense != 0) {
-				struct scsi_sense_data *sense;
-
-				sense = (struct scsi_sense_data *)
-				    &cmd->sense_buffer;
-				err_action =
-				    aic_sense_error_action(sense, inq_data, 0);
-
-			} else {
-				err_action = SS_RETRY|SSQ_FALLBACK
-					   | SSQ_DECREMENT_COUNT|EIO;
-			}
-			break;
-		case SCSI_STATUS_QUEUE_FULL:
-		case SCSI_STATUS_BUSY:
-			err_action = SS_RETRY|SSQ_DELAY|SSQ_MANY
-				   | SSQ_DECREMENT_COUNT|EBUSY;
-			break;
-		case SCSI_STATUS_RESERV_CONFLICT:
-		default:
-			err_action = SS_FAIL|EBUSY;
-			break;
-		}
-		break;
-	case CAM_CMD_TIMEOUT:
-	case CAM_REQ_CMP_ERR:
-	case CAM_UNEXP_BUSFREE:
-	case CAM_UNCOR_PARITY:
-	case CAM_DATA_RUN_ERR:
-		err_action = SS_RETRY|SSQ_FALLBACK|EIO;
-		break;
-	case CAM_UA_ABORT:
-	case CAM_UA_TERMIO:
-	case CAM_MSG_REJECT_REC:
-	case CAM_SEL_TIMEOUT:
-		err_action = SS_FAIL|EIO;
-		break;
-	case CAM_REQ_INVALID:
-	case CAM_PATH_INVALID:
-	case CAM_DEV_NOT_THERE:
-	case CAM_NO_HBA:
-	case CAM_PROVIDE_FAIL:
-	case CAM_REQ_TOO_BIG:		
-	case CAM_RESRC_UNAVAIL:
-	case CAM_BUSY:
-	default:
-		/* panic??  These should never occur in our application. */
-		err_action = SS_FAIL|EIO;
-		break;
-	case CAM_SCSI_BUS_RESET:
-	case CAM_BDR_SENT:		
-	case CAM_REQUEUE_REQ:
-		/* Unconditional requeue */
-		err_action = SS_RETRY;
-		break;
-	}
-
-	return (err_action);
-}
-
 char *
 aic_parse_brace_option(char *opt_name, char *opt_arg, char *end, int depth,
 		       aic_option_callback_t *callback, u_long callback_arg)
Index: scsi-misc-2.6/drivers/scsi/aic7xxx/aiclib.h
===================================================================
--- scsi-misc-2.6.orig/drivers/scsi/aic7xxx/aiclib.h	2005-08-13 14:46:14.000000000 +0200
+++ scsi-misc-2.6/drivers/scsi/aic7xxx/aiclib.h	2005-08-13 15:55:37.000000000 +0200
@@ -57,121 +57,6 @@
 #ifndef	_AICLIB_H
 #define _AICLIB_H
 
-/*
- * Linux Interrupt Support.
- */
-#ifndef IRQ_RETVAL
-typedef void irqreturn_t;
-#define	IRQ_RETVAL(x)
-#endif
-
-/*
- * SCSI command format
- */
-
-/*
- * Define dome bits that are in ALL (or a lot of) scsi commands
- */
-#define SCSI_CTL_LINK		0x01
-#define SCSI_CTL_FLAG		0x02
-#define SCSI_CTL_VENDOR		0xC0
-#define	SCSI_CMD_LUN		0xA0	/* these two should not be needed */
-#define	SCSI_CMD_LUN_SHIFT	5	/* LUN in the cmd is no longer SCSI */
-
-#define SCSI_MAX_CDBLEN		16	/* 
-					 * 16 byte commands are in the 
-					 * SCSI-3 spec 
-					 */
-/* 6byte CDBs special case 0 length to be 256 */
-#define SCSI_CDB6_LEN(len)	((len) == 0 ? 256 : len)
-
-/*
- * This type defines actions to be taken when a particular sense code is
- * received.  Right now, these flags are only defined to take up 16 bits,
- * but can be expanded in the future if necessary.
- */
-typedef enum {
-	SS_NOP		= 0x000000, /* Do nothing */
-	SS_RETRY	= 0x010000, /* Retry the command */
-	SS_FAIL		= 0x020000, /* Bail out */
-	SS_START	= 0x030000, /* Send a Start Unit command to the device,
-				     * then retry the original command.
-				     */
-	SS_TUR		= 0x040000, /* Send a Test Unit Ready command to the
-				     * device, then retry the original command.
-				     */
-	SS_REQSENSE	= 0x050000, /* Send a RequestSense command to the
-				     * device, then retry the original command.
-				     */
-	SS_INQ_REFRESH	= 0x060000,
-	SS_MASK		= 0xff0000
-} aic_sense_action;
-
-typedef enum {
-	SSQ_NONE		= 0x0000,
-	SSQ_DECREMENT_COUNT	= 0x0100,  /* Decrement the retry count */
-	SSQ_MANY		= 0x0200,  /* send lots of recovery commands */
-	SSQ_RANGE		= 0x0400,  /*
-					    * This table entry represents the
-					    * end of a range of ASCQs that
-					    * have identical error actions
-					    * and text.
-					    */
-	SSQ_PRINT_SENSE		= 0x0800,
-	SSQ_DELAY		= 0x1000,  /* Delay before retry. */
-	SSQ_DELAY_RANDOM	= 0x2000,  /* Randomized delay before retry. */
-	SSQ_FALLBACK		= 0x4000,  /* Do a speed fallback to recover */
-	SSQ_MASK		= 0xff00
-} aic_sense_action_qualifier;
-
-/* Mask for error status values */
-#define SS_ERRMASK	0xff
-
-/* The default, retyable, error action */
-#define SS_RDEF		SS_RETRY|SSQ_DECREMENT_COUNT|SSQ_PRINT_SENSE|EIO
-
-/* The retyable, error action, with table specified error code */
-#define SS_RET		SS_RETRY|SSQ_DECREMENT_COUNT|SSQ_PRINT_SENSE
-
-/* Fatal error action, with table specified error code */
-#define SS_FATAL	SS_FAIL|SSQ_PRINT_SENSE
-
-struct scsi_generic
-{
-	uint8_t opcode;
-	uint8_t bytes[11];
-};
-
-struct scsi_request_sense
-{
-	uint8_t opcode;
-	uint8_t byte2;
-	uint8_t unused[2];
-	uint8_t length;
-	uint8_t control;
-};
-
-struct scsi_test_unit_ready
-{
-	uint8_t opcode;
-	uint8_t byte2;
-	uint8_t unused[3];
-	uint8_t control;
-};
-
-struct scsi_send_diag
-{
-	uint8_t opcode;
-	uint8_t byte2;
-#define	SSD_UOL		0x01
-#define	SSD_DOL		0x02
-#define	SSD_SELFTEST	0x04
-#define	SSD_PF		0x10
-	uint8_t unused[1];
-	uint8_t paramlen[2];
-	uint8_t control;
-};
-
 struct scsi_sense
 {
 	uint8_t opcode;
@@ -181,537 +66,12 @@
 	uint8_t control;
 };
 
-struct scsi_inquiry
-{
-	uint8_t opcode;
-	uint8_t byte2;
-#define	SI_EVPD 0x01
-	uint8_t page_code;
-	uint8_t reserved;
-	uint8_t length;
-	uint8_t control;
-};
-
-struct scsi_mode_sense_6
-{
-	uint8_t opcode;
-	uint8_t byte2;
-#define	SMS_DBD				0x08
-	uint8_t page;
-#define	SMS_PAGE_CODE 			0x3F
-#define SMS_VENDOR_SPECIFIC_PAGE	0x00
-#define SMS_DISCONNECT_RECONNECT_PAGE	0x02
-#define SMS_PERIPHERAL_DEVICE_PAGE	0x09
-#define SMS_CONTROL_MODE_PAGE		0x0A
-#define SMS_ALL_PAGES_PAGE		0x3F
-#define	SMS_PAGE_CTRL_MASK		0xC0
-#define	SMS_PAGE_CTRL_CURRENT 		0x00
-#define	SMS_PAGE_CTRL_CHANGEABLE 	0x40
-#define	SMS_PAGE_CTRL_DEFAULT 		0x80
-#define	SMS_PAGE_CTRL_SAVED 		0xC0
-	uint8_t unused;
-	uint8_t length;
-	uint8_t control;
-};
-
-struct scsi_mode_sense_10
-{
-	uint8_t opcode;
-	uint8_t byte2;		/* same bits as small version */
-	uint8_t page; 		/* same bits as small version */
-	uint8_t unused[4];
-	uint8_t length[2];
-	uint8_t control;
-};
-
-struct scsi_mode_select_6
-{
-	uint8_t opcode;
-	uint8_t byte2;
-#define	SMS_SP	0x01
-#define	SMS_PF	0x10
-	uint8_t unused[2];
-	uint8_t length;
-	uint8_t control;
-};
-
-struct scsi_mode_select_10
-{
-	uint8_t opcode;
-	uint8_t byte2;		/* same bits as small version */
-	uint8_t unused[5];
-	uint8_t length[2];
-	uint8_t control;
-};
-
-/*
- * When sending a mode select to a tape drive, the medium type must be 0.
- */
-struct scsi_mode_hdr_6
-{
-	uint8_t datalen;
-	uint8_t medium_type;
-	uint8_t dev_specific;
-	uint8_t block_descr_len;
-};
-
-struct scsi_mode_hdr_10
-{
-	uint8_t datalen[2];
-	uint8_t medium_type;
-	uint8_t dev_specific;
-	uint8_t reserved[2];
-	uint8_t block_descr_len[2];
-};
-
-struct scsi_mode_block_descr
-{
-	uint8_t density_code;
-	uint8_t num_blocks[3];
-	uint8_t reserved;
-	uint8_t block_len[3];
-};
-
-struct scsi_log_sense
-{
-	uint8_t opcode;
-	uint8_t byte2;
-#define	SLS_SP				0x01
-#define	SLS_PPC				0x02
-	uint8_t page;
-#define	SLS_PAGE_CODE 			0x3F
-#define	SLS_ALL_PAGES_PAGE		0x00
-#define	SLS_OVERRUN_PAGE		0x01
-#define	SLS_ERROR_WRITE_PAGE		0x02
-#define	SLS_ERROR_READ_PAGE		0x03
-#define	SLS_ERROR_READREVERSE_PAGE	0x04
-#define	SLS_ERROR_VERIFY_PAGE		0x05
-#define	SLS_ERROR_NONMEDIUM_PAGE	0x06
-#define	SLS_ERROR_LASTN_PAGE		0x07
-#define	SLS_PAGE_CTRL_MASK		0xC0
-#define	SLS_PAGE_CTRL_THRESHOLD		0x00
-#define	SLS_PAGE_CTRL_CUMULATIVE	0x40
-#define	SLS_PAGE_CTRL_THRESH_DEFAULT	0x80
-#define	SLS_PAGE_CTRL_CUMUL_DEFAULT	0xC0
-	uint8_t reserved[2];
-	uint8_t paramptr[2];
-	uint8_t length[2];
-	uint8_t control;
-};
-
-struct scsi_log_select
-{
-	uint8_t opcode;
-	uint8_t byte2;
-/*	SLS_SP				0x01 */
-#define	SLS_PCR				0x02
-	uint8_t page;
-/*	SLS_PAGE_CTRL_MASK		0xC0 */
-/*	SLS_PAGE_CTRL_THRESHOLD		0x00 */
-/*	SLS_PAGE_CTRL_CUMULATIVE	0x40 */
-/*	SLS_PAGE_CTRL_THRESH_DEFAULT	0x80 */
-/*	SLS_PAGE_CTRL_CUMUL_DEFAULT	0xC0 */
-	uint8_t reserved[4];
-	uint8_t length[2];
-	uint8_t control;
-};
-
-struct scsi_log_header
-{
-	uint8_t page;
-	uint8_t reserved;
-	uint8_t datalen[2];
-};
-
-struct scsi_log_param_header {
-	uint8_t param_code[2];
-	uint8_t param_control;
-#define	SLP_LP				0x01
-#define	SLP_LBIN			0x02
-#define	SLP_TMC_MASK			0x0C
-#define	SLP_TMC_ALWAYS			0x00
-#define	SLP_TMC_EQUAL			0x04
-#define	SLP_TMC_NOTEQUAL		0x08
-#define	SLP_TMC_GREATER			0x0C
-#define	SLP_ETC				0x10
-#define	SLP_TSD				0x20
-#define	SLP_DS				0x40
-#define	SLP_DU				0x80
-	uint8_t param_len;
-};
-
-struct scsi_control_page {
-	uint8_t page_code;
-	uint8_t page_length;
-	uint8_t rlec;
-#define SCB_RLEC			0x01	/*Report Log Exception Cond*/
-	uint8_t queue_flags;
-#define SCP_QUEUE_ALG_MASK		0xF0
-#define SCP_QUEUE_ALG_RESTRICTED	0x00
-#define SCP_QUEUE_ALG_UNRESTRICTED	0x10
-#define SCP_QUEUE_ERR			0x02	/*Queued I/O aborted for CACs*/
-#define SCP_QUEUE_DQUE			0x01	/*Queued I/O disabled*/
-	uint8_t eca_and_aen;
-#define SCP_EECA			0x80	/*Enable Extended CA*/
-#define SCP_RAENP			0x04	/*Ready AEN Permission*/
-#define SCP_UAAENP			0x02	/*UA AEN Permission*/
-#define SCP_EAENP			0x01	/*Error AEN Permission*/
-	uint8_t reserved;
-	uint8_t aen_holdoff_period[2];
-};
-
-struct scsi_reserve
-{
-	uint8_t opcode;
-	uint8_t byte2;
-	uint8_t unused[2];
-	uint8_t length;
-	uint8_t control;
-};
-
-struct scsi_release
-{
-	uint8_t opcode;
-	uint8_t byte2;
-	uint8_t unused[2];
-	uint8_t length;
-	uint8_t control;
-};
-
-struct scsi_prevent
-{
-	uint8_t opcode;
-	uint8_t byte2;
-	uint8_t unused[2];
-	uint8_t how;
-	uint8_t control;
-};
-#define	PR_PREVENT 0x01
-#define PR_ALLOW   0x00
-
-struct scsi_sync_cache
-{
-	uint8_t opcode;
-	uint8_t byte2;
-	uint8_t begin_lba[4];
-	uint8_t reserved;
-	uint8_t lb_count[2];
-	uint8_t control;	
-};
-
-
-struct scsi_changedef
-{
-	uint8_t opcode;
-	uint8_t byte2;
-	uint8_t unused1;
-	uint8_t how;
-	uint8_t unused[4];
-	uint8_t datalen;
-	uint8_t control;
-};
-
-struct scsi_read_buffer
-{
-	uint8_t opcode;
-	uint8_t byte2;
-#define	RWB_MODE		0x07
-#define	RWB_MODE_HDR_DATA	0x00
-#define	RWB_MODE_DATA		0x02
-#define	RWB_MODE_DOWNLOAD	0x04
-#define	RWB_MODE_DOWNLOAD_SAVE	0x05
-        uint8_t buffer_id;
-        uint8_t offset[3];
-        uint8_t length[3];
-        uint8_t control;
-};
-
-struct scsi_write_buffer
-{
-	uint8_t opcode;
-	uint8_t byte2;
-	uint8_t buffer_id;
-	uint8_t offset[3];
-	uint8_t length[3];
-	uint8_t control;
-};
-
-struct scsi_rw_6
-{
-	uint8_t opcode;
-	uint8_t addr[3];
-/* only 5 bits are valid in the MSB address byte */
-#define	SRW_TOPADDR	0x1F
-	uint8_t length;
-	uint8_t control;
-};
-
-struct scsi_rw_10
-{
-	uint8_t opcode;
-#define	SRW10_RELADDR	0x01
-#define SRW10_FUA	0x08
-#define	SRW10_DPO	0x10
-	uint8_t byte2;
-	uint8_t addr[4];
-	uint8_t reserved;
-	uint8_t length[2];
-	uint8_t control;
-};
-
-struct scsi_rw_12
-{
-	uint8_t opcode;
-#define	SRW12_RELADDR	0x01
-#define SRW12_FUA	0x08
-#define	SRW12_DPO	0x10
-	uint8_t byte2;
-	uint8_t addr[4];
-	uint8_t length[4];
-	uint8_t reserved;
-	uint8_t control;
-};
-
-struct scsi_start_stop_unit
-{
-	uint8_t opcode;
-	uint8_t byte2;
-#define	SSS_IMMED		0x01
-	uint8_t reserved[2];
-	uint8_t how;
-#define	SSS_START		0x01
-#define	SSS_LOEJ		0x02
-	uint8_t control;
-};
-
-#define SC_SCSI_1 0x01
-#define SC_SCSI_2 0x03
-
-/*
- * Opcodes
- */
-
-#define	TEST_UNIT_READY		0x00
-#define REQUEST_SENSE		0x03
-#define	READ_6			0x08
-#define WRITE_6			0x0a
-#define INQUIRY			0x12
-#define MODE_SELECT_6		0x15
-#define MODE_SENSE_6		0x1a
-#define START_STOP_UNIT		0x1b
-#define START_STOP		0x1b
-#define RESERVE      		0x16
-#define RELEASE      		0x17
-#define	RECEIVE_DIAGNOSTIC	0x1c
-#define	SEND_DIAGNOSTIC		0x1d
-#define PREVENT_ALLOW		0x1e
-#define	READ_CAPACITY		0x25
-#define	READ_10			0x28
-#define WRITE_10		0x2a
-#define POSITION_TO_ELEMENT	0x2b
-#define	SYNCHRONIZE_CACHE	0x35
-#define	WRITE_BUFFER            0x3b
-#define	READ_BUFFER             0x3c
-#define	CHANGE_DEFINITION	0x40
-#define	LOG_SELECT		0x4c
-#define	LOG_SENSE		0x4d
-#ifdef XXXCAM
-#define	MODE_SENSE_10		0x5A
-#endif
-#define	MODE_SELECT_10		0x55
-#define MOVE_MEDIUM     	0xa5
-#define READ_12			0xa8
-#define WRITE_12		0xaa
-#define READ_ELEMENT_STATUS	0xb8
-
-
-/*
- * Device Types
- */
-#define T_DIRECT	0x00
-#define T_SEQUENTIAL	0x01
-#define T_PRINTER	0x02
-#define T_PROCESSOR	0x03
-#define T_WORM		0x04
-#define T_CDROM		0x05
-#define T_SCANNER 	0x06
-#define T_OPTICAL 	0x07
-#define T_CHANGER	0x08
-#define T_COMM		0x09
-#define T_ASC0		0x0a
-#define T_ASC1		0x0b
-#define	T_STORARRAY	0x0c
-#define	T_ENCLOSURE	0x0d
-#define	T_RBC		0x0e
-#define	T_OCRW		0x0f
-#define T_NODEVICE	0x1F
-#define	T_ANY		0xFF	/* Used in Quirk table matches */
-
-#define T_REMOV		1
-#define	T_FIXED		0
-
-/*
- * This length is the initial inquiry length used by the probe code, as    
- * well as the legnth necessary for aic_print_inquiry() to function 
- * correctly.  If either use requires a different length in the future, 
- * the two values should be de-coupled.
- */
-#define	SHORT_INQUIRY_LENGTH	36
-
-struct scsi_inquiry_data
-{
-	uint8_t device;
-#define	SID_TYPE(inq_data) ((inq_data)->device & 0x1f)
-#define	SID_QUAL(inq_data) (((inq_data)->device & 0xE0) >> 5)
-#define	SID_QUAL_LU_CONNECTED	0x00	/*
-					 * The specified peripheral device
-					 * type is currently connected to
-					 * logical unit.  If the target cannot
-					 * determine whether or not a physical
-					 * device is currently connected, it
-					 * shall also use this peripheral
-					 * qualifier when returning the INQUIRY
-					 * data.  This peripheral qualifier
-					 * does not mean that the device is
-					 * ready for access by the initiator.
-					 */
-#define	SID_QUAL_LU_OFFLINE	0x01	/*
-					 * The target is capable of supporting
-					 * the specified peripheral device type
-					 * on this logical unit; however, the
-					 * physical device is not currently
-					 * connected to this logical unit.
-					 */
-#define SID_QUAL_RSVD		0x02
-#define	SID_QUAL_BAD_LU		0x03	/*
-					 * The target is not capable of
-					 * supporting a physical device on
-					 * this logical unit. For this
-					 * peripheral qualifier the peripheral
-					 * device type shall be set to 1Fh to
-					 * provide compatibility with previous
-					 * versions of SCSI. All other
-					 * peripheral device type values are
-					 * reserved for this peripheral
-					 * qualifier.
-					 */
-#define	SID_QUAL_IS_VENDOR_UNIQUE(inq_data) ((SID_QUAL(inq_data) & 0x08) != 0)
-	uint8_t dev_qual2;
-#define	SID_QUAL2	0x7F
-#define	SID_IS_REMOVABLE(inq_data) (((inq_data)->dev_qual2 & 0x80) != 0)
-	uint8_t version;
-#define SID_ANSI_REV(inq_data) ((inq_data)->version & 0x07)
 #define		SCSI_REV_0		0
 #define		SCSI_REV_CCS		1
 #define		SCSI_REV_2		2
 #define		SCSI_REV_SPC		3
 #define		SCSI_REV_SPC2		4
 
-#define SID_ECMA	0x38
-#define SID_ISO		0xC0
-	uint8_t response_format;
-#define SID_AENC	0x80
-#define SID_TrmIOP	0x40
-	uint8_t additional_length;
-	uint8_t reserved[2];
-	uint8_t flags;
-#define	SID_SftRe	0x01
-#define	SID_CmdQue	0x02
-#define	SID_Linked	0x08
-#define	SID_Sync	0x10
-#define	SID_WBus16	0x20
-#define	SID_WBus32	0x40
-#define	SID_RelAdr	0x80
-#define SID_VENDOR_SIZE   8
-	char	 vendor[SID_VENDOR_SIZE];
-#define SID_PRODUCT_SIZE  16
-	char	 product[SID_PRODUCT_SIZE];
-#define SID_REVISION_SIZE 4
-	char	 revision[SID_REVISION_SIZE];
-	/*
-	 * The following fields were taken from SCSI Primary Commands - 2
-	 * (SPC-2) Revision 14, Dated 11 November 1999
-	 */
-#define	SID_VENDOR_SPECIFIC_0_SIZE	20
-	uint8_t vendor_specific0[SID_VENDOR_SPECIFIC_0_SIZE];
-	/*
-	 * An extension of SCSI Parallel Specific Values
-	 */
-#define	SID_SPI_IUS		0x01
-#define	SID_SPI_QAS		0x02
-#define	SID_SPI_CLOCK_ST	0x00
-#define	SID_SPI_CLOCK_DT	0x04
-#define	SID_SPI_CLOCK_DT_ST	0x0C
-#define	SID_SPI_MASK		0x0F
-	uint8_t spi3data;
-	uint8_t reserved2;
-	/*
-	 * Version Descriptors, stored 2 byte values.
-	 */
-	uint8_t version1[2];
-	uint8_t version2[2];
-	uint8_t version3[2];
-	uint8_t version4[2];
-	uint8_t version5[2];
-	uint8_t version6[2];
-	uint8_t version7[2];
-	uint8_t version8[2];
-
-	uint8_t reserved3[22];
-
-#define	SID_VENDOR_SPECIFIC_1_SIZE	160
-	uint8_t vendor_specific1[SID_VENDOR_SPECIFIC_1_SIZE];
-};
-
-struct scsi_vpd_unit_serial_number
-{
-	uint8_t device;
-	uint8_t page_code;
-#define SVPD_UNIT_SERIAL_NUMBER	0x80
-	uint8_t reserved;
-	uint8_t length; /* serial number length */
-#define SVPD_SERIAL_NUM_SIZE 251
-	uint8_t serial_num[SVPD_SERIAL_NUM_SIZE];
-};
-
-struct scsi_read_capacity
-{
-	uint8_t opcode;
-	uint8_t byte2;
-	uint8_t addr[4];
-	uint8_t unused[3];
-	uint8_t control;
-};
-
-struct scsi_read_capacity_data
-{
-	uint8_t addr[4];
-	uint8_t length[4];
-};
-
-struct scsi_report_luns
-{
-	uint8_t opcode;
-	uint8_t byte2;
-	uint8_t unused[3];
-	uint8_t addr[4];
-	uint8_t control;
-};
-
-struct scsi_report_luns_data {
-	uint8_t length[4];	/* length of LUN inventory, in bytes */
-	uint8_t reserved[4];	/* unused */
-	/*
-	 * LUN inventory- we only support the type zero form for now.
-	 */
-	struct {
-		uint8_t lundata[8];
-	} luns[1];
-};
-#define	RPL_LUNDATA_ATYP_MASK	0xc0	/* MBZ for type 0 lun */
-#define	RPL_LUNDATA_T0LUN	1	/* @ lundata[1] */
-
-
 struct scsi_sense_data
 {
 	uint8_t error_code;
@@ -757,41 +117,6 @@
 #define SSD_FULL_SIZE sizeof(struct scsi_sense_data)
 };
 
-struct scsi_mode_header_6
-{
-	uint8_t data_length;	/* Sense data length */
-	uint8_t medium_type;
-	uint8_t dev_spec;
-	uint8_t blk_desc_len;
-};
-
-struct scsi_mode_header_10
-{
-	uint8_t data_length[2];/* Sense data length */
-	uint8_t medium_type;
-	uint8_t dev_spec;
-	uint8_t unused[2];
-	uint8_t blk_desc_len[2];
-};
-
-struct scsi_mode_page_header
-{
-	uint8_t page_code;
-	uint8_t page_length;
-};
-
-struct scsi_mode_blk_desc
-{
-	uint8_t density;
-	uint8_t nblocks[3];
-	uint8_t reserved;
-	uint8_t blklen[3];
-};
-
-#define	SCSI_DEFAULT_DENSITY	0x00	/* use 'default' density */
-#define	SCSI_SAME_DENSITY	0x7f	/* use 'same' density- >= SCSI-2 only */
-
-
 /*
  * Status Byte
  */
@@ -807,76 +132,7 @@
 #define SCSI_STATUS_ACA_ACTIVE		0x30
 #define SCSI_STATUS_TASK_ABORTED	0x40
 
-struct scsi_inquiry_pattern {
-	uint8_t   type;
-	uint8_t   media_type;
-#define	SIP_MEDIA_REMOVABLE	0x01
-#define	SIP_MEDIA_FIXED		0x02
-	const char *vendor;
-	const char *product;
-	const char *revision;
-}; 
-
-struct scsi_static_inquiry_pattern {
-	uint8_t   type;
-	uint8_t   media_type;
-	char       vendor[SID_VENDOR_SIZE+1];
-	char       product[SID_PRODUCT_SIZE+1];
-	char       revision[SID_REVISION_SIZE+1];
-};
-
-struct scsi_sense_quirk_entry {
-	struct scsi_inquiry_pattern	inq_pat;
-	int				num_sense_keys;
-	int				num_ascs;
-	struct sense_key_table_entry	*sense_key_info;
-	struct asc_table_entry		*asc_info;
-};
-
-struct sense_key_table_entry {
-	uint8_t    sense_key;
-	uint32_t   action;
-	const char *desc;
-};
-
-struct asc_table_entry {
-	uint8_t    asc;
-	uint8_t    ascq;
-	uint32_t   action;
-	const char *desc;
-};
-
-struct op_table_entry {
-	uint8_t    opcode;
-	uint16_t   opmask;
-	const char  *desc;
-};
-
-struct scsi_op_quirk_entry {
-	struct scsi_inquiry_pattern	inq_pat;
-	int				num_ops;
-	struct op_table_entry		*op_table;
-};
-
-typedef enum {
-	SSS_FLAG_NONE		= 0x00,
-	SSS_FLAG_PRINT_COMMAND	= 0x01
-} scsi_sense_string_flags;
-
-extern const char *scsi_sense_key_text[];
-
 /************************* Large Disk Handling ********************************/
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,5,0)
-static __inline int aic_sector_div(u_long capacity, int heads, int sectors);
-
-static __inline int
-aic_sector_div(u_long capacity, int heads, int sectors)
-{
-	return (capacity / (heads * sectors));
-}
-#else
-static __inline int aic_sector_div(sector_t capacity, int heads, int sectors);
-
 static __inline int
 aic_sector_div(sector_t capacity, int heads, int sectors)
 {
@@ -884,7 +140,6 @@
 	sector_div(capacity, (heads * sectors));
 	return (int)capacity;
 }
-#endif
 
 /**************************** Module Library Hack *****************************/
 /*
@@ -899,138 +154,15 @@
 #define	AIC_LIB_ENTRY_EXPAND(x, prefix) AIC_LIB_ENTRY_CONCAT(x, prefix)
 #define AIC_LIB_ENTRY(x)		AIC_LIB_ENTRY_EXPAND(x, AIC_LIB_PREFIX)
 
-#define	aic_sense_desc			AIC_LIB_ENTRY(_sense_desc)
-#define	aic_sense_error_action		AIC_LIB_ENTRY(_sense_error_action)
-#define	aic_error_action		AIC_LIB_ENTRY(_error_action)
-#define	aic_op_desc			AIC_LIB_ENTRY(_op_desc)
-#define	aic_cdb_string			AIC_LIB_ENTRY(_cdb_string)
-#define aic_print_inquiry		AIC_LIB_ENTRY(_print_inquiry)
 #define aic_calc_syncsrate		AIC_LIB_ENTRY(_calc_syncrate)
-#define	aic_calc_syncparam		AIC_LIB_ENTRY(_calc_syncparam)
-#define	aic_calc_speed			AIC_LIB_ENTRY(_calc_speed)
-#define	aic_inquiry_match		AIC_LIB_ENTRY(_inquiry_match)
-#define	aic_static_inquiry_match	AIC_LIB_ENTRY(_static_inquiry_match)
-#define	aic_parse_brace_option		AIC_LIB_ENTRY(_parse_brace_option)
-
-/******************************************************************************/
-
-void			aic_sense_desc(int /*sense_key*/, int /*asc*/,
-				       int /*ascq*/, struct scsi_inquiry_data*,
-				       const char** /*sense_key_desc*/,
-				       const char** /*asc_desc*/);
-aic_sense_action	aic_sense_error_action(struct scsi_sense_data*,
-					       struct scsi_inquiry_data*,
-					       uint32_t /*sense_flags*/);
-uint32_t		aic_error_action(struct scsi_cmnd *,
-					 struct scsi_inquiry_data *,
-					 cam_status, u_int);
-
-#define	SF_RETRY_UA	0x01
-#define SF_NO_PRINT	0x02
-#define SF_QUIET_IR	0x04	/* Be quiet about Illegal Request reponses */
-#define SF_PRINT_ALWAYS	0x08
-
-
-const char *	aic_op_desc(uint16_t /*opcode*/, struct scsi_inquiry_data*);
-char *		aic_cdb_string(uint8_t* /*cdb_ptr*/, char* /*cdb_string*/,
-			       size_t /*len*/);
-void		aic_print_inquiry(struct scsi_inquiry_data*);
 
 u_int		aic_calc_syncsrate(u_int /*period_factor*/);
-u_int		aic_calc_syncparam(u_int /*period*/);
-u_int		aic_calc_speed(u_int width, u_int period, u_int offset,
-			       u_int min_rate);
-	
-int		aic_inquiry_match(caddr_t /*inqbuffer*/,
-				  caddr_t /*table_entry*/);
-int		aic_static_inquiry_match(caddr_t /*inqbuffer*/,
-					 caddr_t /*table_entry*/);
 
 typedef void aic_option_callback_t(u_long, int, int, int32_t);
 char *		aic_parse_brace_option(char *opt_name, char *opt_arg,
 				       char *end, int depth,
 				       aic_option_callback_t *, u_long);
 
-static __inline void	 scsi_extract_sense(struct scsi_sense_data *sense,
-					    int *error_code, int *sense_key,
-					    int *asc, int *ascq);
-static __inline void	 scsi_ulto2b(uint32_t val, uint8_t *bytes);
-static __inline void	 scsi_ulto3b(uint32_t val, uint8_t *bytes);
-static __inline void	 scsi_ulto4b(uint32_t val, uint8_t *bytes);
-static __inline uint32_t scsi_2btoul(uint8_t *bytes);
-static __inline uint32_t scsi_3btoul(uint8_t *bytes);
-static __inline int32_t	 scsi_3btol(uint8_t *bytes);
-static __inline uint32_t scsi_4btoul(uint8_t *bytes);
-
-static __inline void scsi_extract_sense(struct scsi_sense_data *sense,
-				       int *error_code, int *sense_key,
-				       int *asc, int *ascq)
-{
-	*error_code = sense->error_code & SSD_ERRCODE;
-	*sense_key = sense->flags & SSD_KEY;
-	*asc = (sense->extra_len >= 5) ? sense->add_sense_code : 0;
-	*ascq = (sense->extra_len >= 6) ? sense->add_sense_code_qual : 0;
-}
-
-static __inline void
-scsi_ulto2b(uint32_t val, uint8_t *bytes)
-{
-
-	bytes[0] = (val >> 8) & 0xff;
-	bytes[1] = val & 0xff;
-}
-
-static __inline void
-scsi_ulto3b(uint32_t val, uint8_t *bytes)
-{
-
-	bytes[0] = (val >> 16) & 0xff;
-	bytes[1] = (val >> 8) & 0xff;
-	bytes[2] = val & 0xff;
-}
-
-static __inline void
-scsi_ulto4b(uint32_t val, uint8_t *bytes)
-{
-
-	bytes[0] = (val >> 24) & 0xff;
-	bytes[1] = (val >> 16) & 0xff;
-	bytes[2] = (val >> 8) & 0xff;
-	bytes[3] = val & 0xff;
-}
-
-static __inline uint32_t
-scsi_2btoul(uint8_t *bytes)
-{
-	uint32_t rv;
-
-	rv = (bytes[0] << 8) |
-	     bytes[1];
-	return (rv);
-}
-
-static __inline uint32_t
-scsi_3btoul(uint8_t *bytes)
-{
-	uint32_t rv;
-
-	rv = (bytes[0] << 16) |
-	     (bytes[1] << 8) |
-	     bytes[2];
-	return (rv);
-}
-
-static __inline int32_t 
-scsi_3btol(uint8_t *bytes)
-{
-	uint32_t rc = scsi_3btoul(bytes);
- 
-	if (rc & 0x00800000)
-		rc |= 0xff000000;
-
-	return (int32_t) rc;
-}
-
 static __inline uint32_t
 scsi_4btoul(uint8_t *bytes)
 {