From: Rolf Eike Beer <eike-kernel@sf-tec.de>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: linux-scsi@vger.kernel.org,
James Bottomley <James.Bottomley@steeleye.com>,
Andrew Morton <akpm@osdl.org>, Linus Torvalds <torvalds@osdl.org>,
Bolke de Bruin <bdbruin@aub.nl>
Subject: [PATCH 2.6.13-rc6] remove superfluos ioctls from cpqfcTS
Date: Tue, 16 Aug 2005 11:14:38 +0200 [thread overview]
Message-ID: <200508161114.39675@bilbo.math.uni-mannheim.de> (raw)
In-Reply-To: <200508161113.45940@bilbo.math.uni-mannheim.de>
Remove ioctls to get PCI information and driver version. These information
can be found via lspci or dmesg. Also remove two typedefs already commented
out.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
--- a/drivers/scsi/cpqfcTSioctl.h 2005-08-07 20:18:56.000000000 +0200
+++ b/drivers/scsi/cpqfcTSioctl.h 2005-08-14 16:39:04.000000000 +0200
@@ -4,47 +4,6 @@
#define CCPQFCTS_IOC_MAGIC 'Z'
-typedef struct
-{
- __u8 bus;
- __u8 dev_fn;
- __u32 board_id;
-} cpqfc_pci_info_struct;
-
-typedef __u32 DriverVer_type;
-/*
-typedef union
-{
- struct // Peripheral Unit Device
- {
- __u8 Bus:6;
- __u8 Mode:2; // b00
- __u8 Dev;
- } PeripDev;
- struct // Volume Set Address
- {
- __u8 DevMSB:6;
- __u8 Mode:2; // b01
- __u8 DevLSB;
- } LogDev;
- struct // Logical Unit Device (SCSI-3, SCC-2 defined)
- {
- __u8 Targ:6;
- __u8 Mode:2; // b10
- __u8 Dev:5;
- __u8 Bus:3;
-
- } LogUnit;
-} SCSI3Addr_struct;
-
-
-typedef struct
-{
- SCSI3Addr_struct FCP_Nexus;
- __u8 cdb[16];
-} PassThru_Command_struct;
-*/
-
/* this is nearly duplicated in idashare.h */
typedef struct {
int lc; /* Controller number */
@@ -73,9 +32,6 @@
#define VENDOR_READ_OPCODE 0x26
#define VENDOR_WRITE_OPCODE 0x27
-#define CPQFCTS_GETPCIINFO _IOR( CCPQFCTS_IOC_MAGIC, 1, cpqfc_pci_info_struct)
-#define CPQFCTS_GETDRIVVER _IOR( CCPQFCTS_IOC_MAGIC, 9, DriverVer_type)
-
#define CPQFCTS_SCSI_PASSTHRU _IOWR( CCPQFCTS_IOC_MAGIC,11, VENDOR_IOCTL_REQ)
/* We would rather have equivalent generic, low-level driver agnostic
@@ -91,4 +47,3 @@
/* Used to invoke Target Defice Reset for Fibre Channel */
// #define CPQFC_IOCTL_FC_TDR 0x5388
#define CPQFC_IOCTL_FC_TDR _IO( CCPQFCTS_IOC_MAGIC, 15)
-
--- a/drivers/scsi/cpqfcTSinit.c 2005-08-14 15:05:57.000000000 +0200
+++ b/drivers/scsi/cpqfcTSinit.c 2005-08-14 16:13:17.000000000 +0200
@@ -659,40 +659,6 @@ int cpqfcTS_ioctl( struct scsi_device *S
return result;
}
- case CPQFCTS_GETPCIINFO:
- {
- cpqfc_pci_info_struct pciinfo;
-
- if( !arg)
- return -EINVAL;
-
-
-
- pciinfo.bus = cpqfcHBAdata->PciDev->bus->number;
- pciinfo.dev_fn = cpqfcHBAdata->PciDev->devfn;
- pciinfo.board_id = cpqfcHBAdata->PciDev->device |
- (cpqfcHBAdata->PciDev->vendor <<16);
-
- if(copy_to_user( arg, &pciinfo, sizeof(cpqfc_pci_info_struct)))
- return( -EFAULT);
- return 0;
- }
-
- case CPQFCTS_GETDRIVVER:
- {
- DriverVer_type DriverVer =
- CPQFCTS_DRIVER_VER( VER_MAJOR,VER_MINOR,VER_SUBMINOR);
-
- if( !arg)
- return -EINVAL;
-
- if(copy_to_user( arg, &DriverVer, sizeof(DriverVer)))
- return( -EFAULT);
- return 0;
- }
-
-
-
case CPQFC_IOCTL_FC_TARGET_ADDRESS:
// can we find an FC device mapping to this SCSI target?
/* DumCmnd.channel = ScsiDev->channel; */ // For searching
next prev parent reply other threads:[~2005-08-16 9:14 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-05 10:02 [PATCH 2.6.13-rc5] reduce whitespace bloat in drivers/scsi/cpqfcTScontrol.c Rolf Eike Beer
2005-08-09 16:06 ` [PATCH 2.6.13-rc5] rewrite drivers/scsi/cpqfcTScontrol.c::CpqTsGetSFQEntry Rolf Eike Beer
2005-08-16 9:11 ` [PATCH 2.6.13-rc6] remove dead reset function from cpqfcTS driver Rolf Eike Beer
2005-08-16 9:11 ` [PATCH 2.6.13-rc6] MODULE_DEVICE_TABLE for " Rolf Eike Beer
2005-08-16 9:12 ` [PATCH 2.6.13-rc6] remove 2.4 compat code from " Rolf Eike Beer
2005-08-16 9:13 ` [PATCH 2.6.13-rc6] more whitespace cleanups for cpqfcTS Rolf Eike Beer
2005-08-16 9:14 ` Rolf Eike Beer [this message]
2005-08-16 14:58 ` [PATCH 2.6.13-rc6] improve start/stop code for worker thread in cpqfcTS driver Rolf Eike Beer
2005-08-16 16:20 ` [PATCH 2.6.13-rc6] improve start/stop code for worker thread in cpqfcTS driver, take 2 Rolf Eike Beer
2005-08-16 16:24 ` Christoph Hellwig
2005-08-16 17:09 ` [PATCH 2.6.13-rc6] improve start/stop code for worker thread in cpqfcTS driver, take 3 Rolf Eike Beer
2005-08-17 8:57 ` [PATCH 2.6.13-rc6] fix copying stack memory in cpqfcTScontrol.c::cpqfcTSPutLinkQue() Rolf Eike Beer
2005-08-16 14:28 ` [PATCH 2.6.13-rc6] remove 2.4 compat code from cpqfcTS driver, take 2 Rolf Eike Beer
2005-08-16 14:51 ` [PATCH 2.6.13-rc6] remove 2.4 compat code from cpqfcTS driver, take 3 Rolf Eike Beer
2005-08-16 12:53 ` [PATCH 2.6.13-rc6] MODULE_DEVICE_TABLE for cpqfcTS driver Jiri Slaby
2005-08-16 13:57 ` Rolf Eike Beer
2005-08-16 14:36 ` [PATCH 2.6.13-rc6] MODULE_DEVICE_TABLE for cpqfcTS driver, take 2 Rolf Eike Beer
2005-08-16 9:17 ` [PATCH 2.6.13-rc6] remove dead reset function from cpqfcTS driver Christoph Hellwig
2005-08-16 9:37 ` Rolf Eike Beer
2005-08-16 14:49 ` Martin K. Petersen
2005-08-16 15:07 ` Rolf Eike Beer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200508161114.39675@bilbo.math.uni-mannheim.de \
--to=eike-kernel@sf-tec.de \
--cc=James.Bottomley@steeleye.com \
--cc=akpm@osdl.org \
--cc=bdbruin@aub.nl \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=torvalds@osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.