From: Uberto Barbini <uberto@ubiland.net>
To: linux-hotplug@vger.kernel.org
Subject: Re: udev too slow?
Date: Fri, 19 Aug 2005 19:54:09 +0000 [thread overview]
Message-ID: <200508192154.10305.uberto@ubiland.net> (raw)
In-Reply-To: <8F1EED683FFEDD43B4FE4A0425847F2EAEE581@EXE.ceda.polimi.it>
> On Fri, Aug 19, 2005 at 12:10:56PM +0200, Barbini Uberto wrote:
> > I've just passed to udev from devfs (Gentoo daily sync with 2.6.12).
> >
> > I've a problem with dvb drivers: after the modprobe it occurs about 10
> > seconds before udev creates the devices (/dev/adapter0/xxx), which
> > it's pretty unacceptable in a dining room settopbox.
>
> Update to udev 068, if not already. Start "udevmonitor" before loading the
> modules and post the output it prints. It will show the sequence of the
> kernel->udev events. I have a USB DVB device which takes less than a second
> to initialize:
I emerged 068 (gentoo standard is 058 right now).
With 068 it takes 4-5 seconds instead of 9-10, way better but not perfect.
This is udevmonitor output:
UEVENT[1124474094] add@/module/stv0299
UEVENT[1124474094] add@/module/ves1x93
UEVENT[1124474094] add@/module/ttpci_eeprom
UEVENT[1124474094] add@/module/saa7146
UEVENT[1124474094] add@/module/video_buf
UEVENT[1124474094] add@/module/saa7146_vv
UEVENT[1124474094] add@/module/dvb_core
UEVENT[1124474094] add@/module/dvb_ttpci
UEVENT[1124474094] add@/bus/pci/drivers/dvb
UEVENT[1124474094] add@/class/firmware/0000:00:14.0
UDEV [1124474094] add@/module/dvb_core
UDEV [1124474094] add@/module/saa7146_vv
UDEV [1124474094] add@/module/dvb_ttpci
UDEV [1124474094] add@/module/ves1x93
UDEV [1124474094] add@/module/ttpci_eeprom
UDEV [1124474094] add@/module/saa7146
UDEV [1124474094] add@/module/stv0299
UDEV [1124474094] add@/module/video_buf
UDEV [1124474094] add@/bus/pci/drivers/dvb
UEVENT[1124474094] remove@/class/firmware/0000:00:14.0
UDEV [1124474094] add@/class/firmware/0000:00:14.0
UEVENT[1124474094] add@/class/i2c-adapter/i2c-1
UEVENT[1124474094] add@/class/i2c-dev/i2c-1
UDEV [1124474094] remove@/class/firmware/0000:00:14.0
UEVENT[1124474095] add@/class/dvb/dvb0.demux0
UEVENT[1124474095] add@/class/dvb/dvb0.dvr0
UEVENT[1124474095] add@/class/dvb/dvb0.video0
UEVENT[1124474095] add@/class/dvb/dvb0.audio0
UEVENT[1124474095] add@/class/dvb/dvb0.ca0
UEVENT[1124474095] add@/class/dvb/dvb0.osd0
UEVENT[1124474095] add@/class/dvb/dvb0.net0
UEVENT[1124474095] add@/class/video4linux/video1
UEVENT[1124474095] add@/class/dvb/dvb0.frontend0
UDEV [1124474099] add@/class/i2c-adapter/i2c-1
UDEV [1124474099] add@/class/dvb/dvb0.ca0
UDEV [1124474099] add@/class/dvb/dvb0.osd0
UDEV [1124474099] add@/class/video4linux/video1
UDEV [1124474099] add@/class/dvb/dvb0.frontend0
UDEV [1124474099] add@/class/dvb/dvb0.video0
UDEV [1124474099] add@/class/dvb/dvb0.audio0
UDEV [1124474099] add@/class/i2c-dev/i2c-1
UDEV [1124474099] add@/class/dvb/dv
please note the delay between 1124474095 and 1124474099.
Is there some other test I could try?
Bye Uberto
-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO
September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices
Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA
Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf
_______________________________________________
Linux-hotplug-devel mailing list http://linux-hotplug.sourceforge.net
Linux-hotplug-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-hotplug-devel
next prev parent reply other threads:[~2005-08-19 19:54 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-19 10:10 udev too slow? Barbini Uberto
2005-08-19 11:41 ` Kay Sievers
2005-08-19 19:54 ` Uberto Barbini [this message]
2005-08-19 20:36 ` Kay Sievers
2005-08-19 22:56 ` Greg KH
2005-08-20 18:16 ` Uberto Barbini
2005-08-20 19:11 ` Kay Sievers
2005-08-28 23:28 ` Kay Sievers
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200508192154.10305.uberto@ubiland.net \
--to=uberto@ubiland.net \
--cc=linux-hotplug@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.