From: Johannes Stezenbach <js@linuxtv.org>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org, Andrew de Quincey <adq_dvb@lidskialf.net>
Subject: [DVB patch 46/54] budget-ci: add support for TT DVB-C CI card
Date: Mon, 05 Sep 2005 01:23:45 +0200 [thread overview]
Message-ID: <20050904232334.237562000@abc> (raw)
In-Reply-To: 20050904232259.777473000@abc
[-- Attachment #1: dvb-ttpci-add-dvb-c-ci-support.patch --]
[-- Type: text/plain, Size: 15034 bytes --]
From: Andrew de Quincey <adq_dvb@lidskialf.net>
Add support for TT DVB-C CI card.
Signed-off-by: Andrew de Quincey <adq_dvb@lidskialf.net>
Signed-off-by: Johannes Stezenbach <js@linuxtv.org>
drivers/media/dvb/b2c2/flexcop-fe-tuner.c | 97 +++++++++++++++
drivers/media/dvb/frontends/stv0297.c | 121 -------------------
drivers/media/dvb/frontends/stv0297.h | 8 +
drivers/media/dvb/ttpci/av7110.c | 95 +++++++++++++++
drivers/media/dvb/ttpci/budget-ci.c | 188 +++++++++++++++++++++++++++++-
5 files changed, 387 insertions(+), 122 deletions(-)
--- linux-2.6.13-git4.orig/drivers/media/dvb/ttpci/budget-ci.c 2005-09-04 22:28:03.000000000 +0200
+++ linux-2.6.13-git4/drivers/media/dvb/ttpci/budget-ci.c 2005-09-04 22:30:55.000000000 +0200
@@ -40,6 +40,7 @@
#include "dvb_ca_en50221.h"
#include "stv0299.h"
+#include "stv0297.h"
#include "tda1004x.h"
#define DEBIADDR_IR 0x1234
@@ -847,6 +848,180 @@ static struct tda1004x_config philips_td
.request_firmware = philips_tdm1316l_request_firmware,
};
+static int dvbc_philips_tdm1316l_pll_set(struct dvb_frontend *fe, struct dvb_frontend_parameters *params)
+{
+ struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv;
+ u8 tuner_buf[5];
+ struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,
+ .flags = 0,
+ .buf = tuner_buf,
+ .len = sizeof(tuner_buf) };
+ int tuner_frequency = 0;
+ u8 band, cp, filter;
+
+ // determine charge pump
+ tuner_frequency = params->frequency + 36125000;
+ if (tuner_frequency < 87000000)
+ return -EINVAL;
+ else if (tuner_frequency < 130000000) {
+ cp = 3;
+ band = 1;
+ } else if (tuner_frequency < 160000000) {
+ cp = 5;
+ band = 1;
+ } else if (tuner_frequency < 200000000) {
+ cp = 6;
+ band = 1;
+ } else if (tuner_frequency < 290000000) {
+ cp = 3;
+ band = 2;
+ } else if (tuner_frequency < 420000000) {
+ cp = 5;
+ band = 2;
+ } else if (tuner_frequency < 480000000) {
+ cp = 6;
+ band = 2;
+ } else if (tuner_frequency < 620000000) {
+ cp = 3;
+ band = 4;
+ } else if (tuner_frequency < 830000000) {
+ cp = 5;
+ band = 4;
+ } else if (tuner_frequency < 895000000) {
+ cp = 7;
+ band = 4;
+ } else
+ return -EINVAL;
+
+ // assume PLL filter should always be 8MHz for the moment.
+ filter = 1;
+
+ // calculate divisor
+ tuner_frequency = (params->frequency + 36125000 + (62500/2)) / 62500;
+
+ // setup tuner buffer
+ tuner_buf[0] = tuner_frequency >> 8;
+ tuner_buf[1] = tuner_frequency & 0xff;
+ tuner_buf[2] = 0xc8;
+ tuner_buf[3] = (cp << 5) | (filter << 3) | band;
+ tuner_buf[4] = 0x80;
+
+ stv0297_enable_plli2c(fe);
+ if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
+ return -EIO;
+
+ msleep(50);
+
+ stv0297_enable_plli2c(fe);
+ if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1)
+ return -EIO;
+
+ msleep(1);
+
+ return 0;
+}
+
+static u8 dvbc_philips_tdm1316l_inittab[] = {
+ 0x80, 0x01,
+ 0x80, 0x00,
+ 0x81, 0x01,
+ 0x81, 0x00,
+ 0x00, 0x09,
+ 0x01, 0x69,
+ 0x03, 0x00,
+ 0x04, 0x00,
+ 0x07, 0x00,
+ 0x08, 0x00,
+ 0x20, 0x00,
+ 0x21, 0x40,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x24, 0x40,
+ 0x25, 0x88,
+ 0x30, 0xff,
+ 0x31, 0x00,
+ 0x32, 0xff,
+ 0x33, 0x00,
+ 0x34, 0x50,
+ 0x35, 0x7f,
+ 0x36, 0x00,
+ 0x37, 0x20,
+ 0x38, 0x00,
+ 0x40, 0x1c,
+ 0x41, 0xff,
+ 0x42, 0x29,
+ 0x43, 0x20,
+ 0x44, 0xff,
+ 0x45, 0x00,
+ 0x46, 0x00,
+ 0x49, 0x04,
+ 0x4a, 0x00,
+ 0x4b, 0x7b,
+ 0x52, 0x30,
+ 0x55, 0xae,
+ 0x56, 0x47,
+ 0x57, 0xe1,
+ 0x58, 0x3a,
+ 0x5a, 0x1e,
+ 0x5b, 0x34,
+ 0x60, 0x00,
+ 0x63, 0x00,
+ 0x64, 0x00,
+ 0x65, 0x00,
+ 0x66, 0x00,
+ 0x67, 0x00,
+ 0x68, 0x00,
+ 0x69, 0x00,
+ 0x6a, 0x02,
+ 0x6b, 0x00,
+ 0x70, 0xff,
+ 0x71, 0x00,
+ 0x72, 0x00,
+ 0x73, 0x00,
+ 0x74, 0x0c,
+ 0x80, 0x00,
+ 0x81, 0x00,
+ 0x82, 0x00,
+ 0x83, 0x00,
+ 0x84, 0x04,
+ 0x85, 0x80,
+ 0x86, 0x24,
+ 0x87, 0x78,
+ 0x88, 0x10,
+ 0x89, 0x00,
+ 0x90, 0x01,
+ 0x91, 0x01,
+ 0xa0, 0x04,
+ 0xa1, 0x00,
+ 0xa2, 0x00,
+ 0xb0, 0x91,
+ 0xb1, 0x0b,
+ 0xc0, 0x53,
+ 0xc1, 0x70,
+ 0xc2, 0x12,
+ 0xd0, 0x00,
+ 0xd1, 0x00,
+ 0xd2, 0x00,
+ 0xd3, 0x00,
+ 0xd4, 0x00,
+ 0xd5, 0x00,
+ 0xde, 0x00,
+ 0xdf, 0x00,
+ 0x61, 0x38,
+ 0x62, 0x0a,
+ 0x53, 0x13,
+ 0x59, 0x08,
+ 0xff, 0xff,
+};
+
+static struct stv0297_config dvbc_philips_tdm1316l_config = {
+ .demod_address = 0x1c,
+ .inittab = dvbc_philips_tdm1316l_inittab,
+ .invert = 0,
+ .pll_set = dvbc_philips_tdm1316l_pll_set,
+};
+
+
static void frontend_init(struct budget_ci *budget_ci)
@@ -868,6 +1043,15 @@ static void frontend_init(struct budget_
}
break;
+ case 0x1010: // TT DVB-C CI budget (stv0297/Philips tdm1316l(tda6651tt))
+ budget_ci->tuner_pll_address = 0x61;
+ budget_ci->budget.dvb_frontend =
+ stv0297_attach(&dvbc_philips_tdm1316l_config, &budget_ci->budget.i2c_adap);
+ if (budget_ci->budget.dvb_frontend) {
+ break;
+ }
+ break;
+
case 0x1011: // Hauppauge/TT Nova-T budget (tda10045/Philips tdm1316l(tda6651tt) + TDA9889)
budget_ci->tuner_pll_address = 0x63;
budget_ci->budget.dvb_frontend =
@@ -877,7 +1061,7 @@ static void frontend_init(struct budget_
}
break;
- case 0x1012: // Hauppauge/TT Nova-T CI budget (tda10045/Philips tdm1316l(tda6651tt) + TDA9889)
+ case 0x1012: // TT DVB-T CI budget (tda10046/Philips tdm1316l(tda6651tt))
budget_ci->tuner_pll_address = 0x60;
budget_ci->budget.dvb_frontend =
tda10046_attach(&philips_tdm1316l_config, &budget_ci->budget.i2c_adap);
@@ -965,10 +1149,12 @@ static struct saa7146_extension budget_e
MAKE_BUDGET_INFO(ttbci, "TT-Budget/WinTV-NOVA-CI PCI", BUDGET_TT_HW_DISEQC);
MAKE_BUDGET_INFO(ttbt2, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT);
MAKE_BUDGET_INFO(ttbtci, "TT-Budget-T-CI PCI", BUDGET_TT);
+MAKE_BUDGET_INFO(ttbcci, "TT-Budget-C-CI PCI", BUDGET_TT);
static struct pci_device_id pci_tbl[] = {
MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100c),
MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100f),
+ MAKE_EXTENSION_PCI(ttbcci, 0x13c2, 0x1010),
MAKE_EXTENSION_PCI(ttbt2, 0x13c2, 0x1011),
MAKE_EXTENSION_PCI(ttbtci, 0x13c2, 0x1012),
{
--- linux-2.6.13-git4.orig/drivers/media/dvb/frontends/stv0297.c 2005-09-04 22:28:12.000000000 +0200
+++ linux-2.6.13-git4/drivers/media/dvb/frontends/stv0297.c 2005-09-04 22:30:55.000000000 +0200
@@ -35,7 +35,6 @@ struct stv0297_state {
struct dvb_frontend frontend;
unsigned long base_freq;
- u8 pwm;
};
#if 1
@@ -46,94 +45,6 @@ struct stv0297_state {
#define STV0297_CLOCK_KHZ 28900
-static u8 init_tab[] = {
- 0x00, 0x09,
- 0x01, 0x69,
- 0x03, 0x00,
- 0x04, 0x00,
- 0x07, 0x00,
- 0x08, 0x00,
- 0x20, 0x00,
- 0x21, 0x40,
- 0x22, 0x00,
- 0x23, 0x00,
- 0x24, 0x40,
- 0x25, 0x88,
- 0x30, 0xff,
- 0x31, 0x00,
- 0x32, 0xff,
- 0x33, 0x00,
- 0x34, 0x50,
- 0x35, 0x7f,
- 0x36, 0x00,
- 0x37, 0x20,
- 0x38, 0x00,
- 0x40, 0x1c,
- 0x41, 0xff,
- 0x42, 0x29,
- 0x43, 0x00,
- 0x44, 0xff,
- 0x45, 0x00,
- 0x46, 0x00,
- 0x49, 0x04,
- 0x4a, 0xff,
- 0x4b, 0x7f,
- 0x52, 0x30,
- 0x55, 0xae,
- 0x56, 0x47,
- 0x57, 0xe1,
- 0x58, 0x3a,
- 0x5a, 0x1e,
- 0x5b, 0x34,
- 0x60, 0x00,
- 0x63, 0x00,
- 0x64, 0x00,
- 0x65, 0x00,
- 0x66, 0x00,
- 0x67, 0x00,
- 0x68, 0x00,
- 0x69, 0x00,
- 0x6a, 0x02,
- 0x6b, 0x00,
- 0x70, 0xff,
- 0x71, 0x00,
- 0x72, 0x00,
- 0x73, 0x00,
- 0x74, 0x0c,
- 0x80, 0x00,
- 0x81, 0x00,
- 0x82, 0x00,
- 0x83, 0x00,
- 0x84, 0x04,
- 0x85, 0x80,
- 0x86, 0x24,
- 0x87, 0x78,
- 0x88, 0x00,
- 0x89, 0x00,
- 0x90, 0x01,
- 0x91, 0x01,
- 0xa0, 0x00,
- 0xa1, 0x00,
- 0xa2, 0x00,
- 0xb0, 0x91,
- 0xb1, 0x0b,
- 0xc0, 0x53,
- 0xc1, 0x70,
- 0xc2, 0x12,
- 0xd0, 0x00,
- 0xd1, 0x00,
- 0xd2, 0x00,
- 0xd3, 0x00,
- 0xd4, 0x00,
- 0xd5, 0x00,
- 0xde, 0x00,
- 0xdf, 0x00,
- 0x61, 0x49,
- 0x62, 0x0b,
- 0x53, 0x08,
- 0x59, 0x08,
-};
-
static int stv0297_writereg(struct stv0297_state *state, u8 reg, u8 data)
{
@@ -378,34 +289,9 @@ static int stv0297_init(struct dvb_front
struct stv0297_state *state = fe->demodulator_priv;
int i;
- /* soft reset */
- stv0297_writereg_mask(state, 0x80, 1, 1);
- stv0297_writereg_mask(state, 0x80, 1, 0);
-
- /* reset deinterleaver */
- stv0297_writereg_mask(state, 0x81, 1, 1);
- stv0297_writereg_mask(state, 0x81, 1, 0);
-
/* load init table */
- for (i = 0; i < sizeof(init_tab); i += 2) {
- stv0297_writereg(state, init_tab[i], init_tab[i + 1]);
- }
-
- /* set a dummy symbol rate */
- stv0297_set_symbolrate(state, 6900);
-
- /* invert AGC1 polarity */
- stv0297_writereg_mask(state, 0x88, 0x10, 0x10);
-
- /* setup bit error counting */
- stv0297_writereg_mask(state, 0xA0, 0x80, 0x00);
- stv0297_writereg_mask(state, 0xA0, 0x10, 0x00);
- stv0297_writereg_mask(state, 0xA0, 0x08, 0x00);
- stv0297_writereg_mask(state, 0xA0, 0x07, 0x04);
-
- /* min + max PWM */
- stv0297_writereg(state, 0x4a, 0x00);
- stv0297_writereg(state, 0x4b, state->pwm);
+ for (i=0; !(state->config->inittab[i] == 0xff && state->config->inittab[i+1] == 0xff); i+=2)
+ stv0297_writereg(state, state->config->inittab[i], state->config->inittab[i+1]);
msleep(200);
if (state->config->pll_init)
@@ -738,7 +624,7 @@ static void stv0297_release(struct dvb_f
static struct dvb_frontend_ops stv0297_ops;
struct dvb_frontend *stv0297_attach(const struct stv0297_config *config,
- struct i2c_adapter *i2c, int pwm)
+ struct i2c_adapter *i2c)
{
struct stv0297_state *state = NULL;
@@ -752,7 +638,6 @@ struct dvb_frontend *stv0297_attach(cons
state->i2c = i2c;
memcpy(&state->ops, &stv0297_ops, sizeof(struct dvb_frontend_ops));
state->base_freq = 0;
- state->pwm = pwm;
/* check if the demod is there */
if ((stv0297_readreg(state, 0x80) & 0x70) != 0x20)
--- linux-2.6.13-git4.orig/drivers/media/dvb/frontends/stv0297.h 2005-09-04 22:03:40.000000000 +0200
+++ linux-2.6.13-git4/drivers/media/dvb/frontends/stv0297.h 2005-09-04 22:30:55.000000000 +0200
@@ -29,6 +29,12 @@ struct stv0297_config
/* the demodulator's i2c address */
u8 demod_address;
+ /* inittab - array of pairs of values.
+ * First of each pair is the register, second is the value.
+ * List should be terminated with an 0xff, 0xff pair.
+ */
+ u8* inittab;
+
/* does the "inversion" need inverted? */
u8 invert:1;
@@ -38,7 +44,7 @@ struct stv0297_config
};
extern struct dvb_frontend* stv0297_attach(const struct stv0297_config* config,
- struct i2c_adapter* i2c, int pwm);
+ struct i2c_adapter* i2c);
extern int stv0297_enable_plli2c(struct dvb_frontend* fe);
#endif // STV0297_H
--- linux-2.6.13-git4.orig/drivers/media/dvb/ttpci/av7110.c 2005-09-04 22:28:03.000000000 +0200
+++ linux-2.6.13-git4/drivers/media/dvb/ttpci/av7110.c 2005-09-04 22:30:55.000000000 +0200
@@ -1934,6 +1934,98 @@ static struct sp8870_config alps_tdlb7_c
};
+static u8 nexusca_stv0297_inittab[] = {
+ 0x80, 0x01,
+ 0x80, 0x00,
+ 0x81, 0x01,
+ 0x81, 0x00,
+ 0x00, 0x09,
+ 0x01, 0x69,
+ 0x03, 0x00,
+ 0x04, 0x00,
+ 0x07, 0x00,
+ 0x08, 0x00,
+ 0x20, 0x00,
+ 0x21, 0x40,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x24, 0x40,
+ 0x25, 0x88,
+ 0x30, 0xff,
+ 0x31, 0x00,
+ 0x32, 0xff,
+ 0x33, 0x00,
+ 0x34, 0x50,
+ 0x35, 0x7f,
+ 0x36, 0x00,
+ 0x37, 0x20,
+ 0x38, 0x00,
+ 0x40, 0x1c,
+ 0x41, 0xff,
+ 0x42, 0x29,
+ 0x43, 0x00,
+ 0x44, 0xff,
+ 0x45, 0x00,
+ 0x46, 0x00,
+ 0x49, 0x04,
+ 0x4a, 0x00,
+ 0x4b, 0x7b,
+ 0x52, 0x30,
+ 0x55, 0xae,
+ 0x56, 0x47,
+ 0x57, 0xe1,
+ 0x58, 0x3a,
+ 0x5a, 0x1e,
+ 0x5b, 0x34,
+ 0x60, 0x00,
+ 0x63, 0x00,
+ 0x64, 0x00,
+ 0x65, 0x00,
+ 0x66, 0x00,
+ 0x67, 0x00,
+ 0x68, 0x00,
+ 0x69, 0x00,
+ 0x6a, 0x02,
+ 0x6b, 0x00,
+ 0x70, 0xff,
+ 0x71, 0x00,
+ 0x72, 0x00,
+ 0x73, 0x00,
+ 0x74, 0x0c,
+ 0x80, 0x00,
+ 0x81, 0x00,
+ 0x82, 0x00,
+ 0x83, 0x00,
+ 0x84, 0x04,
+ 0x85, 0x80,
+ 0x86, 0x24,
+ 0x87, 0x78,
+ 0x88, 0x10,
+ 0x89, 0x00,
+ 0x90, 0x01,
+ 0x91, 0x01,
+ 0xa0, 0x04,
+ 0xa1, 0x00,
+ 0xa2, 0x00,
+ 0xb0, 0x91,
+ 0xb1, 0x0b,
+ 0xc0, 0x53,
+ 0xc1, 0x70,
+ 0xc2, 0x12,
+ 0xd0, 0x00,
+ 0xd1, 0x00,
+ 0xd2, 0x00,
+ 0xd3, 0x00,
+ 0xd4, 0x00,
+ 0xd5, 0x00,
+ 0xde, 0x00,
+ 0xdf, 0x00,
+ 0x61, 0x49,
+ 0x62, 0x0b,
+ 0x53, 0x08,
+ 0x59, 0x08,
+ 0xff, 0xff,
+};
static int nexusca_stv0297_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params)
{
@@ -1982,6 +2074,7 @@ static int nexusca_stv0297_pll_set(struc
static struct stv0297_config nexusca_stv0297_config = {
.demod_address = 0x1C,
+ .inittab = nexusca_stv0297_inittab,
.invert = 1,
.pll_set = nexusca_stv0297_pll_set,
};
@@ -2259,7 +2352,7 @@ static int frontend_init(struct av7110 *
case 0x000A: // Hauppauge/TT Nexus-CA rev1.X
- av7110->fe = stv0297_attach(&nexusca_stv0297_config, &av7110->i2c_adap, 0x7b);
+ av7110->fe = stv0297_attach(&nexusca_stv0297_config, &av7110->i2c_adap);
if (av7110->fe) {
/* set TDA9819 into DVB mode */
saa7146_setgpio(av7110->dev, 1, SAA7146_GPIO_OUTLO); // TDA9198 pin9(STD)
--- linux-2.6.13-git4.orig/drivers/media/dvb/b2c2/flexcop-fe-tuner.c 2005-09-04 22:28:03.000000000 +0200
+++ linux-2.6.13-git4/drivers/media/dvb/b2c2/flexcop-fe-tuner.c 2005-09-04 22:30:55.000000000 +0200
@@ -334,8 +334,103 @@ static struct mt312_config skystar23_sam
.pll_set = skystar23_samsung_tbdu18132_pll_set,
};
+
+static u8 alps_tdee4_stv0297_inittab[] = {
+ 0x80, 0x01,
+ 0x80, 0x00,
+ 0x81, 0x01,
+ 0x81, 0x00,
+ 0x00, 0x09,
+ 0x01, 0x69,
+ 0x03, 0x00,
+ 0x04, 0x00,
+ 0x07, 0x00,
+ 0x08, 0x00,
+ 0x20, 0x00,
+ 0x21, 0x40,
+ 0x22, 0x00,
+ 0x23, 0x00,
+ 0x24, 0x40,
+ 0x25, 0x88,
+ 0x30, 0xff,
+ 0x31, 0x00,
+ 0x32, 0xff,
+ 0x33, 0x00,
+ 0x34, 0x50,
+ 0x35, 0x7f,
+ 0x36, 0x00,
+ 0x37, 0x20,
+ 0x38, 0x00,
+ 0x40, 0x1c,
+ 0x41, 0xff,
+ 0x42, 0x29,
+ 0x43, 0x00,
+ 0x44, 0xff,
+ 0x45, 0x00,
+ 0x46, 0x00,
+ 0x49, 0x04,
+ 0x4a, 0x00,
+ 0x4b, 0xf8,
+ 0x52, 0x30,
+ 0x55, 0xae,
+ 0x56, 0x47,
+ 0x57, 0xe1,
+ 0x58, 0x3a,
+ 0x5a, 0x1e,
+ 0x5b, 0x34,
+ 0x60, 0x00,
+ 0x63, 0x00,
+ 0x64, 0x00,
+ 0x65, 0x00,
+ 0x66, 0x00,
+ 0x67, 0x00,
+ 0x68, 0x00,
+ 0x69, 0x00,
+ 0x6a, 0x02,
+ 0x6b, 0x00,
+ 0x70, 0xff,
+ 0x71, 0x00,
+ 0x72, 0x00,
+ 0x73, 0x00,
+ 0x74, 0x0c,
+ 0x80, 0x00,
+ 0x81, 0x00,
+ 0x82, 0x00,
+ 0x83, 0x00,
+ 0x84, 0x04,
+ 0x85, 0x80,
+ 0x86, 0x24,
+ 0x87, 0x78,
+ 0x88, 0x10,
+ 0x89, 0x00,
+ 0x90, 0x01,
+ 0x91, 0x01,
+ 0xa0, 0x04,
+ 0xa1, 0x00,
+ 0xa2, 0x00,
+ 0xb0, 0x91,
+ 0xb1, 0x0b,
+ 0xc0, 0x53,
+ 0xc1, 0x70,
+ 0xc2, 0x12,
+ 0xd0, 0x00,
+ 0xd1, 0x00,
+ 0xd2, 0x00,
+ 0xd3, 0x00,
+ 0xd4, 0x00,
+ 0xd5, 0x00,
+ 0xde, 0x00,
+ 0xdf, 0x00,
+ 0x61, 0x49,
+ 0x62, 0x0b,
+ 0x53, 0x08,
+ 0x59, 0x08,
+ 0xff, 0xff,
+};
+
static struct stv0297_config alps_tdee4_stv0297_config = {
.demod_address = 0x1c,
+ .inittab = alps_tdee4_stv0297_inittab,
// .invert = 1,
// .pll_set = alps_tdee4_stv0297_pll_set,
};
@@ -369,7 +464,7 @@ int flexcop_frontend_init(struct flexcop
info("found the bcm3510 at i2c address: 0x%02x",air2pc_atsc_first_gen_config.demod_address);
} else
/* try the cable dvb (stv0297) */
- if ((fc->fe = stv0297_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap, 0xf8)) != NULL) {
+ if ((fc->fe = stv0297_attach(&alps_tdee4_stv0297_config, &fc->i2c_adap)) != NULL) {
fc->dev_type = FC_CABLE;
info("found the stv0297 at i2c address: 0x%02x",alps_tdee4_stv0297_config.demod_address);
} else
--
next prev parent reply other threads:[~2005-09-04 23:33 UTC|newest]
Thread overview: 67+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-09-04 23:22 [DVB patch 00/54] DVB update Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 01/54] email address update Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 02/54] remove version.h dependencies Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 03/54] avoid building empty built-in.o Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 04/54] core: glue code for DMX_GET_CAPS and DMX_SET_SOURCE Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 05/54] core: dvb_demux: fix continuity counter error handling Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 06/54] core: dvb_demux: remove unused cruft Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 07/54] core: dvb_demux: remove unsused descramble callbacks Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 08/54] core: dvb_demux: remove more unused cruft Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 09/54] core: dvb_demux: use INIT_LIST_HEAD Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 10/54] core: dvb_demux formatting fixes Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 11/54] core: CI timeout fix Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 12/54] frontend: mt352: fix signal strength reading Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 13/54] frontend: stv0299: pass i2c bus to pll callback Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 14/54] frontend: s5h1420: fixes Johannes Stezenbach
2005-09-04 23:56 ` Nish Aravamudan
2005-09-05 8:45 ` Andrew de Quincey
2005-09-04 23:23 ` [DVB patch 15/54] frontend: stv0299: support reading both BER and UCBLOCKS Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 16/54] frontend: tda1004x: fix SNR reading Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 17/54] frontend: ves1820: improve tuning Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 18/54] frontend: cx24110: DiSEqC fix Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 19/54] frontend: cx24110: another " Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 20/54] frontend: cx24110: clean up timeout handling Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 21/54] frontend: stv0297: QAM128 tuning improvement Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 22/54] frontend: or51132: remove bogus optimization attempt Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 23/54] usb: add TwinhanDTV StarBox support Johannes Stezenbach
2005-09-04 23:52 ` Nish Aravamudan
2005-09-04 23:23 ` [DVB patch 24/54] usb: dibusb: Kworld Xpert DVB-T USB2.0 support Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 25/54] usb: removed empty module_init/exit calls Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 26/54] usb: dtt200u: copy frontend_ops before modifying Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 27/54] usb: dtt200u: add proper device names Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 28/54] usb: core: change dvb_usb_device_init() API Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 29/54] usb: digitv: support for nxt6000 demod Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 30/54] usb: white space cleanup Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 31/54] usb: cxusb: fixes for new firmware Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 32/54] remove noisy debug print Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 33/54] bt8xx: endianness fix Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 34/54] bt8xx: cleanup Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 35/54] bt8xx: Nebula DigiTV mt352 support Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 36/54] Nebula DigiTV nxt6000 fix Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 37/54] dst: fix symbol rate setting Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 38/54] dst: remove unnecessary code Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 39/54] dst: dprrintk cleanup Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 40/54] dst: identify boards Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 41/54] dst: fix DVB-C tuning Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 42/54] dst: ci doc update Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 43/54] dst: Updated Documentation Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 44/54] cinergyT2: remote control fixes Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 45/54] av7110: Siemens DVB-C analog video input support Johannes Stezenbach
2005-09-04 23:23 ` Johannes Stezenbach [this message]
2005-09-04 23:23 ` [DVB patch 47/54] budget-av: fixes for CI interface Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 48/54] budget-av: enable frontend on KNC1 Plus cards Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 49/54] av7110: disable superflous firmware handshake Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 50/54] av7110: conditionally disable workaround for broken firmware Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 51/54] ttpci: av7110: RC5+ remote control support Johannes Stezenbach
2005-09-04 23:41 ` Nish Aravamudan
2005-09-05 0:13 ` Johannes Stezenbach
2005-09-05 0:16 ` Nish Aravamudan
2005-09-05 0:27 ` Johannes Stezenbach
2005-09-05 0:34 ` Nish Aravamudan
2005-09-04 23:23 ` [DVB patch 52/54] ttpci: add PCI ids for old Siemens/TT DVB-C card Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 53/54] saa7146: i2c vs. sysfs fix Johannes Stezenbach
2005-09-04 23:23 ` [DVB patch 54/54] ttusb-budget: use time_after_eq() Johannes Stezenbach
2005-09-04 23:45 ` Nish Aravamudan
2005-09-05 0:07 ` Johannes Stezenbach
2005-09-05 0:14 ` Nish Aravamudan
2005-09-05 0:19 ` Johannes Stezenbach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20050904232334.237562000@abc \
--to=js@linuxtv.org \
--cc=adq_dvb@lidskialf.net \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.