All of lore.kernel.org
 help / color / mirror / Atom feed
From: Daniel Jacobowitz <dan@debian.org>
To: linux-mips@linux-mips.org
Cc: ralf@linux-mips.org
Subject: [PATCH] Revise MIPS64 ptrace interface
Date: Wed, 28 Sep 2005 18:11:15 -0400	[thread overview]
Message-ID: <20050928221115.GA22817@nevyn.them.org> (raw)
In-Reply-To: <20050922182601.GA10829@nevyn.them.org>

Change the N32 debugging ABI to something more sane, and add support
for o32 and n32 debuggers to trace n64 programs.

Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
---

I've now tested everything except the actual _3264 operations, which
were copied from PPC anyway and I have reasonable faith in.  So here's
a final patch.  If this seems reasonable to everyone, I'd like for it
to be merged, and then I can submit the glibc and gdb bits.

The patch itself is below.  If you want to test it, at
http://return.false.org/~drow/mips/ you can find:

  gdb-2005-09-28-HEAD-MIPS64-DEBUG.tar.gz
  glibc-2005-09-28-HEAD-MIPS64-NPTL.tar.gz
  linux-2005-09-28-sentosa-n32-ptrace.tar.gz

These are patches against linux-mips.org HEAD, glibc HEAD, and gdb HEAD
(all last week) that allow n32 and n64 debugging.  For n64 debugging
you'll need to remove .debug_frame/.eh_frame first since I haven't
looked at those bits of GDB / GCC yet.

Index: linux/arch/mips/kernel/ptrace32.c
===================================================================
--- linux.orig/arch/mips/kernel/ptrace32.c	2005-09-21 14:48:02.000000000 -0400
+++ linux/arch/mips/kernel/ptrace32.c	2005-09-28 15:18:29.000000000 -0400
@@ -35,6 +35,12 @@
 #include <asm/uaccess.h>
 #include <asm/bootinfo.h>
 
+int ptrace_getregs (struct task_struct *child, __s64 __user *data);
+int ptrace_setregs (struct task_struct *child, __s64 __user *data);
+
+int ptrace_getfpregs (struct task_struct *child, __u32 __user *data);
+int ptrace_setfpregs (struct task_struct *child, __u32 __user *data);
+
 /*
  * Tracing a 32-bit process with a 64-bit strace and vice versa will not
  * work.  I don't know how to fix this.
@@ -99,6 +105,35 @@ asmlinkage int sys32_ptrace(int request,
 		break;
 	}
 
+	/*
+	 * Read 4 bytes of the other process' storage
+	 *  data is a pointer specifying where the user wants the
+	 *	4 bytes copied into
+	 *  addr is a pointer in the user's storage that contains an 8 byte
+	 *	address in the other process of the 4 bytes that is to be read
+	 * (this is run in a 32-bit process looking at a 64-bit process)
+	 * when I and D space are separate, these will need to be fixed.
+	 */
+	case PTRACE_PEEKTEXT_3264:
+	case PTRACE_PEEKDATA_3264: {
+		u32 tmp;
+		int copied;
+		u32 __user * addrOthers;
+
+		ret = -EIO;
+
+		/* Get the addr in the other process that we want to read */
+		if (get_user(addrOthers, (u32 __user * __user *) (unsigned long) addr) != 0)
+			break;
+
+		copied = access_process_vm(child, (u64)addrOthers, &tmp,
+				sizeof(tmp), 0);
+		if (copied != sizeof(tmp))
+			break;
+		ret = put_user(tmp, (u32 __user *) (unsigned long) data);
+		break;
+	}
+
 	/* Read the word at location addr in the USER area. */
 	case PTRACE_PEEKUSR: {
 		struct pt_regs *regs;
@@ -202,6 +237,31 @@ asmlinkage int sys32_ptrace(int request,
 		ret = -EIO;
 		break;
 
+	/*
+	 * Write 4 bytes into the other process' storage
+	 *  data is the 4 bytes that the user wants written
+	 *  addr is a pointer in the user's storage that contains an
+	 *	8 byte address in the other process where the 4 bytes
+	 *	that is to be written
+	 * (this is run in a 32-bit process looking at a 64-bit process)
+	 * when I and D space are separate, these will need to be fixed.
+	 */
+	case PTRACE_POKETEXT_3264:
+	case PTRACE_POKEDATA_3264: {
+		u32 __user * addrOthers;
+
+		/* Get the addr in the other process that we want to write into */
+		ret = -EIO;
+		if (get_user(addrOthers, (u32 __user * __user *) (unsigned long) addr) != 0)
+			break;
+		ret = 0;
+		if (access_process_vm(child, (u64)addrOthers, &data,
+					sizeof(data), 1) == sizeof(data))
+			break;
+		ret = -EIO;
+		break;
+	}
+
 	case PTRACE_POKEUSR: {
 		struct pt_regs *regs;
 		ret = 0;
@@ -276,6 +336,22 @@ asmlinkage int sys32_ptrace(int request,
 		break;
 		}
 
+	case PTRACE_GETREGS:
+		ret = ptrace_getregs (child, (__u64 __user *) (__u64) data);
+		break;
+
+	case PTRACE_SETREGS:
+		ret = ptrace_setregs (child, (__u64 __user *) (__u64) data);
+		break;
+
+	case PTRACE_GETFPREGS:
+		ret = ptrace_getfpregs (child, (__u32 __user *) (__u64) data);
+		break;
+
+	case PTRACE_SETFPREGS:
+		ret = ptrace_setfpregs (child, (__u32 __user *) (__u64) data);
+		break;
+
 	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
 	case PTRACE_CONT: { /* restart after signal. */
 		ret = -EIO;
@@ -320,6 +396,11 @@ asmlinkage int sys32_ptrace(int request,
 			       (unsigned int __user *) (unsigned long) data);
 		break;
 
+	case PTRACE_GET_THREAD_AREA_3264:
+		ret = put_user(child->thread_info->tp_value,
+				(unsigned long __user *) (unsigned long) data);
+		break;
+
 	default:
 		ret = ptrace_request(child, request, addr, data);
 		break;
Index: linux/include/asm-mips/ptrace.h
===================================================================
--- linux.orig/include/asm-mips/ptrace.h	2005-09-21 14:48:02.000000000 -0400
+++ linux/include/asm-mips/ptrace.h	2005-09-28 15:15:14.000000000 -0400
@@ -48,10 +48,10 @@ struct pt_regs {
 };
 
 /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
-/* #define PTRACE_GETREGS		12 */
-/* #define PTRACE_SETREGS		13 */
-/* #define PTRACE_GETFPREGS		14 */
-/* #define PTRACE_SETFPREGS		15 */
+#define PTRACE_GETREGS		12
+#define PTRACE_SETREGS		13
+#define PTRACE_GETFPREGS		14
+#define PTRACE_SETFPREGS		15
 /* #define PTRACE_GETFPXREGS		18 */
 /* #define PTRACE_SETFPXREGS		19 */
 
@@ -60,6 +60,13 @@ struct pt_regs {
 #define PTRACE_GET_THREAD_AREA	25
 #define PTRACE_SET_THREAD_AREA	26
 
+/* Calls to trace a 64bit program from a 32bit program.  */
+#define PTRACE_PEEKTEXT_3264	0xc0
+#define PTRACE_PEEKDATA_3264	0xc1
+#define PTRACE_POKETEXT_3264	0xc2
+#define PTRACE_POKEDATA_3264	0xc3
+#define PTRACE_GET_THREAD_AREA_3264	0xc4
+
 #ifdef __KERNEL__
 
 #include <linux/linkage.h>
Index: linux/arch/mips/kernel/scall64-n32.S
===================================================================
--- linux.orig/arch/mips/kernel/scall64-n32.S	2005-09-21 09:34:45.000000000 -0400
+++ linux/arch/mips/kernel/scall64-n32.S	2005-09-22 14:04:19.000000000 -0400
@@ -216,7 +216,7 @@ EXPORT(sysn32_call_table)
 	PTR	compat_sys_getrusage
 	PTR	sys32_sysinfo
 	PTR	compat_sys_times
-	PTR	sys_ptrace
+	PTR	sys32_ptrace
 	PTR	sys_getuid			/* 6100 */
 	PTR	sys_syslog
 	PTR	sys_getgid
Index: linux/arch/mips/kernel/ptrace.c
===================================================================
--- linux.orig/arch/mips/kernel/ptrace.c	2005-09-22 14:11:07.000000000 -0400
+++ linux/arch/mips/kernel/ptrace.c	2005-09-28 15:17:23.000000000 -0400
@@ -38,6 +38,7 @@
 #include <asm/system.h>
 #include <asm/uaccess.h>
 #include <asm/bootinfo.h>
+#include <asm/reg.h>
 
 /*
  * Called by kernel/ptrace.c when detaching..
@@ -49,6 +50,118 @@ void ptrace_disable(struct task_struct *
 	/* Nothing to do.. */
 }
 
+/*
+ * Read a general register set.  We always use the 64-bit format, even
+ * for 32-bit kernels and for 32-bit processes on a 64-bit kernel.
+ * Registers are sign extended to fill the available space.
+ */
+int ptrace_getregs (struct task_struct *child, __s64 __user *data)
+{
+	struct pt_regs *regs;
+	int i;
+
+	if (!access_ok(VERIFY_WRITE, data, 38 * 8))
+		return -EIO;
+
+	regs = (struct pt_regs *) ((unsigned long) child->thread_info +
+	       THREAD_SIZE - 32 - sizeof(struct pt_regs));
+
+	for (i = 0; i < 32; i++)
+		__put_user (regs->regs[i], data + i);
+	__put_user (regs->lo, data + EF_LO - EF_R0);
+	__put_user (regs->hi, data + EF_HI - EF_R0);
+	__put_user (regs->cp0_epc, data + EF_CP0_EPC - EF_R0);
+	__put_user (regs->cp0_badvaddr, data + EF_CP0_BADVADDR - EF_R0);
+	__put_user (regs->cp0_status, data + EF_CP0_STATUS - EF_R0);
+	__put_user (regs->cp0_cause, data + EF_CP0_CAUSE - EF_R0);
+
+	return 0;
+}
+
+/*
+ * Write a general register set.  As for PTRACE_GETREGS, we always use
+ * the 64-bit format.  On a 32-bit kernel only the lower order half
+ * (according to endianness) will be used.
+ */
+int ptrace_setregs (struct task_struct *child, __s64 __user *data)
+{
+	struct pt_regs *regs;
+	int i;
+
+	if (!access_ok(VERIFY_READ, data, 38 * 8))
+		return -EIO;
+
+	regs = (struct pt_regs *) ((unsigned long) child->thread_info +
+	       THREAD_SIZE - 32 - sizeof(struct pt_regs));
+
+	for (i = 0; i < 32; i++)
+		__get_user (regs->regs[i], data + i);
+	__get_user (regs->lo, data + EF_LO - EF_R0);
+	__get_user (regs->hi, data + EF_HI - EF_R0);
+	__get_user (regs->cp0_epc, data + EF_CP0_EPC - EF_R0);
+
+	/* badvaddr, status, and cause may not be written.  */
+
+	return 0;
+}
+
+int ptrace_getfpregs (struct task_struct *child, __u32 __user *data)
+{
+	int i;
+
+	if (!access_ok(VERIFY_WRITE, data, 33 * 8))
+		return -EIO;
+
+	if (tsk_used_math(child)) {
+		fpureg_t *fregs = get_fpu_regs(child);
+		for (i = 0; i < 32; i++)
+			__put_user (fregs[i], i + (__u64 __user *) data);
+	} else {
+		for (i = 0; i < 32; i++)
+			__put_user ((__u64) -1, i + (__u64 __user *) data);
+	}
+
+	if (cpu_has_fpu) {
+		unsigned int flags, tmp;
+
+		__put_user (child->thread.fpu.hard.fcr31, data + 64);
+
+		flags = read_c0_status();
+		__enable_fpu();
+		__asm__ __volatile__("cfc1\t%0,$0" : "=r" (tmp));
+		write_c0_status(flags);
+		__put_user (tmp, data + 65);
+	} else {
+		__put_user (child->thread.fpu.soft.fcr31, data + 64);
+		__put_user ((__u32) 0, data + 65);
+	}
+
+	return 0;
+}
+
+int ptrace_setfpregs (struct task_struct *child, __u32 __user *data)
+{
+	fpureg_t *fregs;
+	int i;
+
+	if (!access_ok(VERIFY_READ, data, 33 * 8))
+		return -EIO;
+
+	fregs = get_fpu_regs(child);
+
+	for (i = 0; i < 32; i++)
+		__get_user (fregs[i], i + (__u64 __user *) data);
+
+	if (cpu_has_fpu)
+		__get_user (child->thread.fpu.hard.fcr31, data + 64);
+	else
+		__get_user (child->thread.fpu.soft.fcr31, data + 64);
+
+	/* FIR may not be written.  */
+
+	return 0;
+}
+
 asmlinkage int sys_ptrace(long request, long pid, long addr, long data)
 {
 	struct task_struct *child;
@@ -300,6 +413,22 @@ asmlinkage int sys_ptrace(long request, 
 		break;
 		}
 
+	case PTRACE_GETREGS:
+		ret = ptrace_getregs (child, (__u64 __user *) data);
+		break;
+
+	case PTRACE_SETREGS:
+		ret = ptrace_setregs (child, (__u64 __user *) data);
+		break;
+
+	case PTRACE_GETFPREGS:
+		ret = ptrace_getfpregs (child, (__u32 __user *) data);
+		break;
+
+	case PTRACE_SETFPREGS:
+		ret = ptrace_setfpregs (child, (__u32 __user *) data);
+		break;
+
 	case PTRACE_SYSCALL: /* continue and stop at next (return from) syscall */
 	case PTRACE_CONT: { /* restart after signal. */
 		ret = -EIO;

-- 
Daniel Jacobowitz
CodeSourcery, LLC

  reply	other threads:[~2005-09-28 22:11 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-09-22 18:26 RFC: Revise n32 ptrace interface Daniel Jacobowitz
2005-09-28 22:11 ` Daniel Jacobowitz [this message]
2005-09-30  0:13   ` [PATCH] Revise MIPS64 " Ralf Baechle
2005-09-30  0:05 ` RFC: Revise n32 " Ralf Baechle
2005-09-30 19:46   ` Dominic Sweetman
2005-09-30 20:34     ` Daniel Jacobowitz

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20050928221115.GA22817@nevyn.them.org \
    --to=dan@debian.org \
    --cc=linux-mips@linux-mips.org \
    --cc=ralf@linux-mips.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.