From: Nick Pasich <NewsLetters@NickAndBarb.net>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: linux-ide@vger.kernel.org
Subject: Re: no device found for TX4000
Date: Fri, 7 Oct 2005 06:43:24 -0700 [thread overview]
Message-ID: <20051007134324.GA18871@69.17.112.251> (raw)
In-Reply-To: <43445009.6010608@pobox.com>
Jeff,
The sata_promise fixes in linux-2.6.14-rc3 "did the trick".
All 4 drives are now accessible.
*******************************************************************************************************
*******************************************************************************************************
Oct 6 15:09:49 Server05 kernel: ata1: PATA max UDMA/133 cmd 0xF0CE2200 ctl 0xF0CE2238 bmdma 0x0 irq 11
Oct 6 15:09:49 Server05 kernel: ata2: PATA max UDMA/133 cmd 0xF0CE2280 ctl 0xF0CE22B8 bmdma 0x0 irq 11
Oct 6 15:09:49 Server05 kernel: ata3: PATA max UDMA/133 cmd 0xF0CE2300 ctl 0xF0CE2338 bmdma 0x0 irq 11
Oct 6 15:09:49 Server05 kernel: ata4: PATA max UDMA/133 cmd 0xF0CE2380 ctl 0xF0CE23B8 bmdma 0x0 irq 11
Oct 6 15:09:49 Server05 kernel: ata1: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48
Oct 6 15:09:49 Server05 kernel: ata1: dev 0 configured for UDMA/33
Oct 6 15:09:49 Server05 kernel: scsi1 : sata_promise
Oct 6 15:09:49 Server05 kernel: ata2: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48
Oct 6 15:09:49 Server05 kernel: ata2: dev 0 configured for UDMA/33
Oct 6 15:09:49 Server05 kernel: scsi2 : sata_promise
Oct 6 15:09:49 Server05 kernel: ata3: dev 0 ATA, max UDMA/133, 490234752 sectors: lba48
Oct 6 15:09:49 Server05 kernel: ata3: dev 0 configured for UDMA/33
Oct 6 15:09:49 Server05 kernel: scsi3 : sata_promise
Oct 6 15:09:49 Server05 kernel: ata4: dev 0 ATA, max UDMA/100, 488397168 sectors: lba48
Oct 6 15:09:49 Server05 kernel: ata4: dev 0 configured for UDMA/33
Oct 6 15:09:49 Server05 kernel: scsi4 : sata_promise
Oct 6 15:09:49 Server05 kernel: Vendor: ATA Model: Maxtor 6Y250P0 Rev: YAR4
Oct 6 15:09:49 Server05 kernel: Type: Direct-Access ANSI SCSI revision: 05
Oct 6 15:09:49 Server05 kernel: SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
Oct 6 15:09:49 Server05 kernel: SCSI device sda: drive cache: write through
Oct 6 15:09:49 Server05 kernel: SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
Oct 6 15:09:49 Server05 kernel: SCSI device sda: drive cache: write through
Oct 6 15:09:49 Server05 kernel: sda: sda1
Oct 6 15:09:49 Server05 kernel: Attached scsi disk sda at scsi1, channel 0, id 0, lun 0
Oct 6 15:09:49 Server05 kernel: Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0
Oct 6 15:09:49 Server05 kernel: Vendor: ATA Model: Maxtor 6Y250P0 Rev: YAR4
Oct 6 15:09:49 Server05 kernel: Type: Direct-Access ANSI SCSI revision: 05
Oct 6 15:09:50 Server05 kernel: SCSI device sdb: 490234752 512-byte hdwr sectors (251000 MB)
Oct 6 15:09:50 Server05 kernel: SCSI device sdb: drive cache: write back
Oct 6 15:09:50 Server05 kernel: SCSI device sdb: 490234752 512-byte hdwr sectors (251000 MB)
Oct 6 15:09:50 Server05 kernel: SCSI device sdb: drive cache: write back
Oct 6 15:09:50 Server05 kernel: sdb: sdb1
Oct 6 15:09:50 Server05 kernel: Attached scsi disk sdb at scsi2, channel 0, id 0, lun 0
Oct 6 15:09:50 Server05 kernel: Attached scsi generic sg2 at scsi2, channel 0, id 0, lun 0, type 0
Oct 6 15:09:50 Server05 kernel: Vendor: ATA Model: Maxtor 6Y250P0 Rev: YAR4
Oct 6 15:09:50 Server05 kernel: Type: Direct-Access ANSI SCSI revision: 05
Oct 6 15:09:50 Server05 kernel: SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB)
Oct 6 15:09:50 Server05 kernel: SCSI device sdc: drive cache: write through
Oct 6 15:09:50 Server05 kernel: SCSI device sdc: 490234752 512-byte hdwr sectors (251000 MB)
Oct 6 15:09:50 Server05 kernel: SCSI device sdc: drive cache: write through
Oct 6 15:09:50 Server05 kernel: sdc: sdc1
Oct 6 15:09:50 Server05 kernel: Attached scsi disk sdc at scsi3, channel 0, id 0, lun 0
Oct 6 15:09:50 Server05 kernel: Attached scsi generic sg3 at scsi3, channel 0, id 0, lun 0, type 0
Oct 6 15:09:50 Server05 kernel: Vendor: ATA Model: WDC WD2500JB-00F Rev: 15.0
Oct 6 15:09:50 Server05 kernel: Type: Direct-Access ANSI SCSI revision: 05
Oct 6 15:09:50 Server05 kernel: SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
Oct 6 15:09:50 Server05 kernel: SCSI device sdd: drive cache: write back
Oct 6 15:09:50 Server05 kernel: SCSI device sdd: 488397168 512-byte hdwr sectors (250059 MB)
Oct 6 15:09:50 Server05 kernel: SCSI device sdd: drive cache: write back
Oct 6 15:09:50 Server05 kernel: sdd: sdd1
Oct 6 15:09:50 Server05 kernel: Attached scsi disk sdd at scsi4, channel 0, id 0, lun 0
Oct 6 15:09:50 Server05 kernel: Attached scsi generic sg4 at scsi4, channel 0, id 0, lun 0, type 0
*******************************************************************************************************
*******************************************************************************************************
Thanks for all your excellent work and quick response,
---( Nick Pasich )---
>Thanks Jeff.....
>
>I'll compile 2.6.14-rc3 and let you know what happens...
>
> ---( Nick Pasich )---
>
>
>On Wed, Oct 05, 2005 at 06:13:29PM -0400, Jeff Garzik wrote:
>> Nick Pasich wrote:
>> >Jeff,
>> >
>> >
>> >I'm running Slackware 10.1 and have compiled linux-2.6.13.3 kernel
>> >with the sata_promise.c as kernel resident.
>>
>> Should be fixed in 2.6.14-rcX...
>>
>> Jeff
>>
>>
>>
--
--------
WebSite: http://NickAndBarb.net
--------
prev parent reply other threads:[~2005-10-07 13:43 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-05 18:05 no device found for TX4000 Nick Pasich
2005-10-05 22:13 ` Jeff Garzik
2005-10-05 22:27 ` Nick Pasich
2005-10-07 13:43 ` Nick Pasich [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051007134324.GA18871@69.17.112.251 \
--to=newsletters@nickandbarb.net \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.