From: Rodolfo Giometti <giometti@linux.it>
To: u-boot@lists.denx.de
Subject: [U-Boot-Users] [PATCH] AS option "allow_branch_to_undefined" removed into mips support
Date: Tue, 11 Oct 2005 16:20:23 +0200 [thread overview]
Message-ID: <20051011142023.GZ5000@enneenne.com> (raw)
Hello,
the attached patch agaist u-boot-1.1.3 (thanks to Tim Braun
<tim.braun@librestream.com>) allow to remove the mips(el)-linux-as
option named "allow_branch_to_undefined". I tested it with GNU
assembler version 2.16.1.
Also it fixes endianness support and adds support for toolchains named
mips-linux- or mipsel-linux- (the former still untested).
Ciao,
Rodolfo
--
GNU/Linux Solutions e-mail: giometti at linux.it
Linux Device Driver giometti at enneenne.com
Embedded Systems home page: giometti.enneenne.com
UNIX programming phone: +39 349 2432127
-------------- next part --------------
Index: cpu/mips/config.mk
===================================================================
RCS file: /home/develop/cvs_private/uboot-mips-exadron/cpu/mips/config.mk,v
retrieving revision 1.2
diff -u -r1.2 config.mk
--- a/cpu/mips/config.mk 16 Sep 2005 15:07:21 -0000 1.2
+++ b/cpu/mips/config.mk 11 Oct 2005 14:09:42 -0000
@@ -26,17 +26,24 @@
if [ "$v" -lt "14" ]; then \
echo "-mcpu=4kc"; \
else \
- echo "-march=4kc -mtune=4kc -Wa,-allow_branch_to_undefined"; \
+ echo "-march=4kc -mtune=4kc"; \
fi)
-ifneq (,$(findstring 4KCle,$(CROSS_COMPILE)))
-MIPSCFLAGS += -EL
-endif
-ifneq (,$(findstring mipsel,$(CROSS_COMPILE)))
-MIPSLDFLAGS += -EL
-endif
-
MIPSCFLAGS += -mabicalls
+ifneq (,$(findstring 4KC,$(CROSS_COMPILE)))
+ ifneq (,$(findstring 4KCle,$(CROSS_COMPILE)))
+ MIPSCFLAGS += -EL
+ else
+ MIPSCFLAGS += -EB
+ endif
+else # mips-linux- or mipsel-linux-
+ ifneq (,$(findstring mipsel,$(CROSS_COMPILE)))
+ MIPSLDFLAGS += -EL
+ else
+ MIPSLDFLAGS += -EB
+ endif
+endif
+
PLATFORM_CPPFLAGS += $(MIPSCFLAGS)
PLATFORM_LDFLAGS += $(MIPSLDFLAGS)
Index: cpu/mips/start.S
===================================================================
RCS file: /home/develop/cvs_private/uboot-mips-exadron/cpu/mips/start.S,v
retrieving revision 1.1.1.1
diff -u -r1.1.1.1 start.S
--- a/cpu/mips/start.S 16 Sep 2005 12:14:19 -0000 1.1.1.1
+++ b/cpu/mips/start.S 11 Oct 2005 14:09:42 -0000
@@ -234,21 +234,38 @@
li t0, CONF_CM_UNCACHED
mtc0 t0, CP0_CONFIG
+ /* Initialize GOT pointer.
+ */
+ bal 1f
+ nop
+ .extern _GLOBAL_OFFSET_TABLE_
+ .word _GLOBAL_OFFSET_TABLE_
+ .word . - 4
+1:
+ move gp, ra
+ lw t1, 0(ra)
+ lw t2, 4(ra)
+ sub t1, t2
+ add gp, t1 # calculate current location of offset table
+
#ifdef CONFIG_INCA_IP
/* Disable INCA-IP Watchdog.
*/
- bal disable_incaip_wdt
+ la t9, disable_incaip_wdt
+ jalr t9
nop
#endif
/* Initialize any external memory.
*/
- bal lowlevel_init
+ la t9, lowlevel_init
+ jalr t9
nop
/* Initialize caches...
*/
- bal mips_cache_reset
+ la t9, mips_cache_reset
+ jalr t9
nop
/* ... and enable them.
@@ -260,21 +277,13 @@
/* Set up temporary stack.
*/
li a0, CFG_INIT_SP_OFFSET
- bal mips_cache_lock
+ la t9, mips_cache_lock
+ jalr t9
nop
li t0, CFG_SDRAM_BASE + CFG_INIT_SP_OFFSET
la sp, 0(t0)
- /* Initialize GOT pointer.
- */
- bal 1f
- nop
- .word _GLOBAL_OFFSET_TABLE_ - 1f + 4
-1:
- move gp, ra
- lw t1, 0(ra)
- add gp, t1
la t9, board_init_f
j t9
nop
Index: examples/mips.lds
===================================================================
RCS file: /home/develop/cvs_private/uboot-mips-exadron/examples/mips.lds,v
retrieving revision 1.1
retrieving revision 1.2
diff -u -r1.1 -r1.2
--- a/examples/mips.lds 16 Sep 2005 12:14:21 -0000 1.1
+++ b/examples/mips.lds 16 Sep 2005 15:05:08 -0000 1.2
@@ -24,7 +24,7 @@
/*
OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
*/
-OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips")
+OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradlittlemips")
OUTPUT_ARCH(mips)
SECTIONS
{
reply other threads:[~2005-10-11 14:20 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051011142023.GZ5000@enneenne.com \
--to=giometti@linux.it \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.