From: Deepak Saxena <dsaxena@plexity.net>
To: Marcel Holtmann <marcel@holtmann.org>
Cc: Andrew Morton <akpm@osdl.org>, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] [BLUETOOTH] kmalloc + memset -> kzalloc conversion
Date: Tue, 11 Oct 2005 16:04:40 -0700 [thread overview]
Message-ID: <20051011230440.GA26330@plexity.net> (raw)
In-Reply-To: <1129071122.6487.6.camel@localhost.localdomain>
On Oct 12 2005, at 00:52, Marcel Holtmann was caught saying:
> Hi Andrew,
>
> > Confused. This patch changes lots of block code, not bluetooth.
>
> I know. This is what I already mailed Deepak, but he never replied.
Sorry, got lost in the mailbox. I think I was not paying attention to
my tab completion and included the wrong patch. Proper patch follows.
~Deepak
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
diff --git a/drivers/bluetooth/bcm203x.c b/drivers/bluetooth/bcm203x.c
--- a/drivers/bluetooth/bcm203x.c
+++ b/drivers/bluetooth/bcm203x.c
@@ -179,14 +179,12 @@ static int bcm203x_probe(struct usb_inte
if (ignore || (intf->cur_altsetting->desc.bInterfaceNumber != 0))
return -ENODEV;
- data = kmalloc(sizeof(*data), GFP_KERNEL);
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data) {
BT_ERR("Can't allocate memory for data structure");
return -ENOMEM;
}
- memset(data, 0, sizeof(*data));
-
data->udev = udev;
data->state = BCM203X_LOAD_MINIDRV;
diff --git a/drivers/bluetooth/bfusb.c b/drivers/bluetooth/bfusb.c
--- a/drivers/bluetooth/bfusb.c
+++ b/drivers/bluetooth/bfusb.c
@@ -673,13 +673,11 @@ static int bfusb_probe(struct usb_interf
}
/* Initialize control structure and load firmware */
- if (!(bfusb = kmalloc(sizeof(struct bfusb), GFP_KERNEL))) {
+ if (!(bfusb = kzalloc(sizeof(struct bfusb), GFP_KERNEL))) {
BT_ERR("Can't allocate memory for control structure");
goto done;
}
- memset(bfusb, 0, sizeof(struct bfusb));
-
bfusb->udev = udev;
bfusb->bulk_in_ep = bulk_in_ep->desc.bEndpointAddress;
bfusb->bulk_out_ep = bulk_out_ep->desc.bEndpointAddress;
diff --git a/drivers/bluetooth/bluecard_cs.c b/drivers/bluetooth/bluecard_cs.c
--- a/drivers/bluetooth/bluecard_cs.c
+++ b/drivers/bluetooth/bluecard_cs.c
@@ -870,10 +870,9 @@ static dev_link_t *bluecard_attach(void)
int ret;
/* Create new info device */
- info = kmalloc(sizeof(*info), GFP_KERNEL);
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return NULL;
- memset(info, 0, sizeof(*info));
link = &info->link;
link->priv = info;
diff --git a/drivers/bluetooth/bpa10x.c b/drivers/bluetooth/bpa10x.c
--- a/drivers/bluetooth/bpa10x.c
+++ b/drivers/bluetooth/bpa10x.c
@@ -550,14 +550,12 @@ static int bpa10x_probe(struct usb_inter
if (ignore)
return -ENODEV;
- data = kmalloc(sizeof(*data), GFP_KERNEL);
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data) {
BT_ERR("Can't allocate data structure");
return -ENOMEM;
}
- memset(data, 0, sizeof(*data));
-
data->udev = udev;
rwlock_init(&data->lock);
diff --git a/drivers/bluetooth/bt3c_cs.c b/drivers/bluetooth/bt3c_cs.c
--- a/drivers/bluetooth/bt3c_cs.c
+++ b/drivers/bluetooth/bt3c_cs.c
@@ -671,10 +671,9 @@ static dev_link_t *bt3c_attach(void)
int ret;
/* Create new info device */
- info = kmalloc(sizeof(*info), GFP_KERNEL);
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return NULL;
- memset(info, 0, sizeof(*info));
link = &info->link;
link->priv = info;
diff --git a/drivers/bluetooth/btuart_cs.c b/drivers/bluetooth/btuart_cs.c
--- a/drivers/bluetooth/btuart_cs.c
+++ b/drivers/bluetooth/btuart_cs.c
@@ -590,10 +590,9 @@ static dev_link_t *btuart_attach(void)
int ret;
/* Create new info device */
- info = kmalloc(sizeof(*info), GFP_KERNEL);
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return NULL;
- memset(info, 0, sizeof(*info));
link = &info->link;
link->priv = info;
diff --git a/drivers/bluetooth/dtl1_cs.c b/drivers/bluetooth/dtl1_cs.c
--- a/drivers/bluetooth/dtl1_cs.c
+++ b/drivers/bluetooth/dtl1_cs.c
@@ -569,10 +569,9 @@ static dev_link_t *dtl1_attach(void)
int ret;
/* Create new info device */
- info = kmalloc(sizeof(*info), GFP_KERNEL);
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
if (!info)
return NULL;
- memset(info, 0, sizeof(*info));
link = &info->link;
link->priv = info;
diff --git a/drivers/bluetooth/hci_bcsp.c b/drivers/bluetooth/hci_bcsp.c
--- a/drivers/bluetooth/hci_bcsp.c
+++ b/drivers/bluetooth/hci_bcsp.c
@@ -682,10 +682,9 @@ static int bcsp_open(struct hci_uart *hu
BT_DBG("hu %p", hu);
- bcsp = kmalloc(sizeof(*bcsp), GFP_ATOMIC);
+ bcsp = kzalloc(sizeof(*bcsp), GFP_ATOMIC);
if (!bcsp)
return -ENOMEM;
- memset(bcsp, 0, sizeof(*bcsp));
hu->priv = bcsp;
skb_queue_head_init(&bcsp->unack);
diff --git a/drivers/bluetooth/hci_h4.c b/drivers/bluetooth/hci_h4.c
--- a/drivers/bluetooth/hci_h4.c
+++ b/drivers/bluetooth/hci_h4.c
@@ -66,10 +66,9 @@ static int h4_open(struct hci_uart *hu)
BT_DBG("hu %p", hu);
- h4 = kmalloc(sizeof(*h4), GFP_ATOMIC);
+ h4 = kzalloc(sizeof(*h4), GFP_ATOMIC);
if (!h4)
return -ENOMEM;
- memset(h4, 0, sizeof(*h4));
skb_queue_head_init(&h4->txq);
diff --git a/drivers/bluetooth/hci_ldisc.c b/drivers/bluetooth/hci_ldisc.c
--- a/drivers/bluetooth/hci_ldisc.c
+++ b/drivers/bluetooth/hci_ldisc.c
@@ -268,11 +268,10 @@ static int hci_uart_tty_open(struct tty_
if (hu)
return -EEXIST;
- if (!(hu = kmalloc(sizeof(struct hci_uart), GFP_KERNEL))) {
+ if (!(hu = kzalloc(sizeof(struct hci_uart), GFP_KERNEL))) {
BT_ERR("Can't allocate controll structure");
return -ENFILE;
}
- memset(hu, 0, sizeof(struct hci_uart));
tty->disc_data = hu;
hu->tty = tty;
diff --git a/drivers/bluetooth/hci_usb.c b/drivers/bluetooth/hci_usb.c
--- a/drivers/bluetooth/hci_usb.c
+++ b/drivers/bluetooth/hci_usb.c
@@ -134,10 +134,9 @@ static struct usb_device_id blacklist_id
static struct _urb *_urb_alloc(int isoc, unsigned int __nocast gfp)
{
- struct _urb *_urb = kmalloc(sizeof(struct _urb) +
+ struct _urb *_urb = kzalloc(sizeof(struct _urb) +
sizeof(struct usb_iso_packet_descriptor) * isoc, gfp);
if (_urb) {
- memset(_urb, 0, sizeof(*_urb));
usb_init_urb(&_urb->urb);
}
return _urb;
@@ -875,13 +874,11 @@ static int hci_usb_probe(struct usb_inte
goto done;
}
- if (!(husb = kmalloc(sizeof(struct hci_usb), GFP_KERNEL))) {
+ if (!(husb = kzalloc(sizeof(struct hci_usb), GFP_KERNEL))) {
BT_ERR("Can't allocate: control structure");
goto done;
}
- memset(husb, 0, sizeof(struct hci_usb));
-
husb->udev = udev;
husb->bulk_out_ep = bulk_out_ep;
husb->bulk_in_ep = bulk_in_ep;
diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c
--- a/drivers/bluetooth/hci_vhci.c
+++ b/drivers/bluetooth/hci_vhci.c
@@ -261,12 +261,10 @@ static int vhci_open(struct inode *inode
struct vhci_data *vhci;
struct hci_dev *hdev;
- vhci = kmalloc(sizeof(struct vhci_data), GFP_KERNEL);
+ vhci = kzalloc(sizeof(struct vhci_data), GFP_KERNEL);
if (!vhci)
return -ENOMEM;
- memset(vhci, 0, sizeof(struct vhci_data));
-
skb_queue_head_init(&vhci->readq);
init_waitqueue_head(&vhci->read_wait);
--
Deepak Saxena - dsaxena@plexity.net - http://www.plexity.net
Even a stopped clock gives the right time twice a day.
next prev parent reply other threads:[~2005-10-11 23:04 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-01 6:51 [PATCH] [BLUETOOTH] kmalloc + memset -> kzalloc conversion Deepak Saxena
2005-10-01 9:42 ` Marcel Holtmann
2005-10-11 22:18 ` Andrew Morton
2005-10-11 22:52 ` Marcel Holtmann
2005-10-11 23:04 ` Deepak Saxena [this message]
2005-10-12 12:19 ` Paulo Marques
2005-10-13 9:52 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051011230440.GA26330@plexity.net \
--to=dsaxena@plexity.net \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.