From: grimm@us.ibm.com
To: "BASABE DEL PINO, DANIEL" <daniel.basabe@madrid.org>
Cc: xen-devel@lists.xensource.com
Subject: Re: Unable to startup SMP domain0 in x86_64
Date: Mon, 24 Oct 2005 14:33:26 -0500 [thread overview]
Message-ID: <20051024193326.GA9922@us.ibm.com> (raw)
In-Reply-To: <BE29C71FB79CEA4CA39B4094179E6A820C3769@NTICMCL07N1.madrid.org>
I am having the same problem with changest 7484.
this is on an ibm x460, 4 em64t dual-core processors:
Linux version 2.6.12.6-xen0 (root@quadmonster.ltc.austin.ibm.com) (gcc version 3.4.2 20041017 (Red Hat 3.4.2-6.fc3)) #2 SMP Mon Oct 24 08:56:10 CDT 2005
kernel direct mapping tables upto 1fc00000 @ 761000-861000
No mptable found.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x17] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x0f] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 15, version 17, address 0xfec00000, GSI 0-35
ACPI: IOAPIC (id[0x0e] address[0xfec01000] gsi_base[35])
IOAPIC[1]: apic_id 14, version 17, address 0xfec01000, GSI 35-70
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 8 global_irq 8 low edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 low edge)
Setting APIC routing to xen
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000)
Built 1 zonelists
Kernel command line: root=/dev/sda3 ro adp94xx=attach_HostRAID:1 console=tty0 console=ttyS0,115200
Initializing CPU#0
PID hash table entries: 2048 (order: 11, 65536 bytes)
Xen reported: 3002.486 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
Software IO TLB enabled:
Aperture: 64 megabytes
Bus range: 0x000000001c000000 - 0x0000000020000000
Kernel range: 0xffff88000190a000 - 0xffff88000590a000
Memory: 429312k/520192k available (3367k kernel code, 90244k reserved, 1288k data, 320k init)
Mount-cache hash table entries: 256
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 1024K
CPU: L3 cache: 8192K
CPU: Physical Processor ID: 0
Initializing CPU#1
Initializing CPU#2
Initializing CPU#3
Initializing CPU#4
Initializing CPU#5
Initializing CPU#6
Brought up 8 CPUs
Initializing CPU#7
----------- [cut here ] --------- [please bite here ] ---------
Kernel BUG at "kernel/posix-cpu-timers.c":1273
invalid operand: 0000 [1] SMP
CPU 2
Modules linked in:
Pid: 0, comm: swapper Not tainted 2.6.12.6-xen0
RIP: e030:[<ffffffff8014cabb>] <ffffffff8014cabb>{run_posix_cpu_timers+59}
RSP: e02b:ffff8800059ebbd8 EFLAGS: 00010246
RAX: ffffffffff577020 RBX: 0000000000000100 RCX: 0000000000000080
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff8800059e06d0
RBP: ffff8800059e06d0 R08: 0000000000000008 R09: 0000000000000000
R10: 0000000000000002 R11: ffffffff805a4a90 R12: ffffffff80658420
R13: ffff880001809360 R14: ffff8800059ebc08 R15: 0000000000000100
FS: 0000000000000000(0000) GS:ffffffff805f8b80(0000) knlGS:0000000000000000
CS: e033 DS: 002b ES: 002b
Process swapper (pid: 0, threadinfo ffff8800059ea000, task ffff8800059e06d0)
Stack: ffff8800059ebc28 ffff88000180ac20 00000000ffff8b72 0000000200000002
0000000000000000 ffff8800059e06d0 ffff8800059ebc08 ffff8800059ebc08
000000000052e09d 0000000000000100
Call Trace:<ffffffff8011af50>{timer_interrupt+512} <ffffffff8015472c>{handle_IRQ_event+76}
<ffffffff8015472c>{handle_IRQ_event+76} <ffffffff8015485c>{__do_IRQ+220}
<ffffffff80116594>{do_IRQ+52} <ffffffff8010db69>{evtchn_do_upcall+201}
<ffffffff80113321>{do_hypervisor_callback+17} <ffffffff8010dada>{evtchn_do_upcall+58}
<ffffffff8010db69>{evtchn_do_upcall+201} <ffffffff80113321>{do_hypervisor_callback+17}
<ffffffff8011098a>{xen_idle+106} <ffffffff8011098a>{xen_idle+106}
<ffffffff801109da>{cpu_idle+58}
Code: 0f 0b 93 9a 46 80 ff ff ff ff f9 04 48 8b 95 40 02 00 00 48
RIP <ffffffff8014cabb>{run_posix_cpu_timers+59} RSP <ffff8800059ebbd8>
<0>Kernel panic - not syncing: Aiee, killing interrupt handler!
stop_this_cpu disable_local_APIC
stop_this_cpu disable_local_APIC
stop_this_cpu disable_local_APIC
stop_this_cpu disable_local_APIC
stop_this_cpu disable_local_APIC
stop_this_cpu disable_local_APIC
ryan
On Mon, Oct 24, 2005 at 11:31:56AM +0200, BASABE DEL PINO, DANIEL wrote:
>
> Hi,
>
> In the last changeset 7477 startup on my sun v40z, 8 opteron processor (4 dual core), it shows:
>
>
> Booting 'Xen 3.0-devel / XenLinux 2.6'
>
> kernel /xen-3.0-devel.gz dom0_mem=296512
> [Multiboot-elf, <0x100000:0x703b8:0x2ac48>, shtab=0x19b078, entry=0x100000]
> module /vmlinuz-2.6.12.6-xen0 root=/dev/VolGroup00/root ro console=tty0 console
> =ttyS0,115200n8
> [Multiboot-module @ 0x19c000, 0x6be5c0 bytes]
> module /initrd-2.6.12.6-xen0.img
> [MultibootLinux version 2.6.12.6-xen0 (root@pruebav40z2) (gcc versión 3.4.3 20050227 (Red Hat 3.4.3-22.1)) #2 SMP Mon Oct 24 11:00:40 CEST 2005
> kernel direct mapping tables upto 12990000 @ 920000-9b7000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
> ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
> ACPI: IOAPIC (id[0x09] address[0xe4000000] gsi_base[24])
> IOAPIC[1]: apic_id 9, version 17, address 0xe4000000, GSI 24-27
> ACPI: IOAPIC (id[0x0a] address[0xe4001000] gsi_base[28])
> IOAPIC[2]: apic_id 10, version 17, address 0xe4001000, GSI 28-31
> ACPI: IOAPIC (id[0x0b] address[0xe5b01000] gsi_base[32])
> IOAPIC[3]: apic_id 11, version 17, address 0xe5b01000, GSI 32-35
> ACPI: IOAPIC (id[0x0c] address[0xe5b03000] gsi_base[36])
> IOAPIC[4]: apic_id 12, version 17, address 0xe5b03000, GSI 36-39
> ACPI: IOAPIC (id[0x0d] address[0xe5b05000] gsi_base[40])
> IOAPIC[5]: apic_id 13, version 17, address 0xe5b05000, GSI 40-43
> ACPI: IOAPIC (id[0x0e] address[0xe5b07000] gsi_base[44])
> IOAPIC[6]: apic_id 14, version 17, address 0xe5b07000, GSI 44-47
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
> Setting APIC routing to xen
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at e4000000 (gap: e4000000:1ac00000)
> Built 1 zonelists
> Kernel command line: root=/dev/VolGroup00/root ro console=tty0 console=ttyS0,115200n8
> Initializing CPU#0
> PID hash table entries: 2048 (order: 11, 65536 bytes)
> Xen reported: 2188.838 MHz processor.
> Console: colour VGA+ 80x25
> Linux version 2.6.12.6-xen0 (root@pruebav40z2) (gcc versión 3.4.3 20050227 (Red Hat 3.4.3-22.1)) #2 SMP Mon Oct 24 11:00:40 CEST 2005
> kernel direct mapping tables upto 12990000 @ 920000-9b7000
> ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
> ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
> ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
> ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
> ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
> ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
> ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
> ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
> ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-23
> ACPI: IOAPIC (id[0x09] address[0xe4000000] gsi_base[24])
> IOAPIC[1]: apic_id 9, version 17, address 0xe4000000, GSI 24-27
> ACPI: IOAPIC (id[0x0a] address[0xe4001000] gsi_base[28])
> IOAPIC[2]: apic_id 10, version 17, address 0xe4001000, GSI 28-31
> ACPI: IOAPIC (id[0x0b] address[0xe5b01000] gsi_base[32])
> IOAPIC[3]: apic_id 11, version 17, address 0xe5b01000, GSI 32-35
> ACPI: IOAPIC (id[0x0c] address[0xe5b03000] gsi_base[36])
> IOAPIC[4]: apic_id 12, version 17, address 0xe5b03000, GSI 36-39
> ACPI: IOAPIC (id[0x0d] address[0xe5b05000] gsi_base[40])
> IOAPIC[5]: apic_id 13, version 17, address 0xe5b05000, GSI 40-43
> ACPI: IOAPIC (id[0x0e] address[0xe5b07000] gsi_base[44])
> IOAPIC[6]: apic_id 14, version 17, address 0xe5b07000, GSI 44-47
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
> Setting APIC routing to xen
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at e4000000 (gap: e4000000:1ac00000)
> Built 1 zonelists
> Kernel command line: root=/dev/VolGroup00/root ro console=tty0 console=ttyS0,115200n8
> Initializing CPU#0
> PID hash table entries: 2048 (order: 11, 65536 bytes)
> Xen reported: 2188.838 MHz processor.
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
> Software IO TLB enabled:
> Aperture: 64 megabytes
> Bus range: 0x000000001c000000 - 0x0000000020000000
> Kernel range: 0xffff8800015c0000 - 0xffff8800055c0000
> Memory: 215420k/304704k available (3003k kernel code, 88660k reserved, 1073k data, 208k init)
> Mount-cache hash table entries: 256
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 1024K (64 bytes/line)
> CPU 0(2) -> Node 0 -> Core 0
> Initia<izingtCaUiz
> g CPCP2
> aItitiili snhed-Uom
> n:nit aloziig CPU#4
> Inpai lizin PUr5
> sIn tial08ing0CP206
> 0B 8ug t up 2
> PUs
> CPU0 attaching sched-domain:
> domain 0: span ff
> groups: 01 02 04 08 10 20 40 80
> CPU1 attaching sched-domain:
> domain 0: span ff
> groups: 02 04 08 10 20 40 80 01
> ----------- [cut here ] --------- [please bite here ] ---------
> Kernel BUG at "kernel/posix-cpu-timers.c":1273
> invalid operand: 0000 [1] SMP
> CPU 2
> Modules linked in:
> Pid: 0, comm: swapper Not tainted 2.6.12.6-xen0
> RIP: e030:[<ffffffff8014d7fb>] <ffffffff8014d7fb>{run_posix_cpu_timers+59}
> RSP: e02b:ffff880000027cd8 EFLAGS: 00010246
> RAX: ffffffffff577020 RBX: 0000000000000100 RCX: 0000000000000324
> RDX: ffff8800014c0c20 RSI: ffff8800014c0c20 RDI: ffff8800000286d0
> RBP: ffff8800000286d0 R08: 0000000000000001 R09: ffff880000028a40
> R10: 0000000000007ff0 R11: 0000000000000246 R12: ffffffff805ae420
> R13: ffff8800014bf360 R14: ffff880000027d08 R15: 0000000000000100
> FS: 0000000000000000(0000) GS:ffffffff80569e80(0000) knlGS:0000000000000000
> CS: e033 DS: 002b ES: 002b
> Process swapper (pid: 0, threadinfo ffff880000026000, task ffff8800000286d0)
> Stack: ffff880000027d28 ffff8800014c0c20 00000000ffff8b4e 0000000200000002
> 0000000000000100 ffff8800000286d0 ffff880000027d08 ffff880000027d08
> 00000000006febc6 0000000000000100
> Call Trace:<ffffffff8011afe3>{timer_interrupt+515} <ffffffff803ebf7d>{__down_failed_trylock+53}
> <ffffffff80157f4c>{handle_IRQ_event+76} <ffffffff8015807c>{__do_IRQ+220}
> <ffffffff801165a4>{do_IRQ+52} <ffffffff8010db69>{evtchn_do_upcall+201}
> <ffffffff8015dca5>{buffered_rmqueue+581} <ffffffff80113321>{do_hypervisor_callback+17}
> <ffffffff8010da2c>{force_evtchn_callback+12} <ffffffff8010da2c>{force_evtchn_callback+12}
> <ffffffff80110253>{cpu_bringup+67}
>
> Code: 0f 0b 69 8c 40 80 ff ff ff ff f9 04 48 8b 95 40 02 00 00 48
> RIP <ffffffff8014d7fb>{run_posix_cpu_timers+59} RSP <ffff880000027cd8>
> <0>Kernel panic - not syncing: Aiee, killing interrupt handler!
>
> _______________________________________________
> Xen-devel mailing list
> Xen-devel@lists.xensource.com
> http://lists.xensource.com/xen-devel
prev parent reply other threads:[~2005-10-24 19:33 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-10-24 9:31 Unable to startup SMP domain0 in x86_64 BASABE DEL PINO, DANIEL
2005-10-24 19:33 ` grimm [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051024193326.GA9922@us.ibm.com \
--to=grimm@us.ibm.com \
--cc=daniel.basabe@madrid.org \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.