From mboxrd@z Thu Jan 1 00:00:00 1970 From: Don Carroll Subject: Re: Asus A8V , via vt8251 AHCI Date: Tue, 1 Nov 2005 22:47:08 -0600 Message-ID: <20051102044708.GA4303@vcr.star-c.com> References: <20051101064058.GA4902@vcr.star-c.com> <20051101192449.GA9719@vcr.star-c.com> <20051102034151.GA7583@vcr.star-c.com> <20051101195715.212ea264.rdunlap@xenotime.net> Reply-To: ibedonc@star-c.com, ibedonc@star-c.com Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="huq684BweRXVnRxX" Return-path: Received: from dpc6935171158.direcpc.com ([69.35.171.158]:51347 "EHLO vcr.star-c.com") by vger.kernel.org with ESMTP id S1751495AbVKBErb (ORCPT ); Tue, 1 Nov 2005 23:47:31 -0500 Content-Disposition: inline In-Reply-To: <20051101195715.212ea264.rdunlap@xenotime.net> Sender: linux-ide-owner@vger.kernel.org List-Id: linux-ide@vger.kernel.org To: "Randy.Dunlap" , linux-ide@vger.kernel.org --huq684BweRXVnRxX Content-Type: text/plain; charset=us-ascii Content-Disposition: inline > This boot log isn't the one where you tried irqpoll, right? you are correct , this one is , also with no MSI , now will go build kernel with MSI back on --huq684BweRXVnRxX Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg-no-msi-and-irq-poll.txt" Bootdata ok (command line is root=/dev/sda1 resume=/dev/sda5 irqpoll) Linux version 2.6.14 (root@vcr.star-c.com) (gcc version 4.0.1 (4.0.1-5mdk for Mandriva Linux release 2006.0)) #2 SMP Tue Nov 1 21:56:43 CST 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable) BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data) BIOS-e820: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS) BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved) ACPI: RSDP (v002 ACPIAM ) @ 0x00000000000fac60 ACPI: XSDT (v001 A M I OEMXSDT 0x09000505 MSFT 0x00000097) @ 0x000000007ffb0100 ACPI: FADT (v003 A M I OEMFACP 0x09000505 MSFT 0x00000097) @ 0x000000007ffb0290 ACPI: MADT (v001 A M I OEMAPIC 0x09000505 MSFT 0x00000097) @ 0x000000007ffb0390 ACPI: OEMB (v001 A M I AMI_OEM 0x09000505 MSFT 0x00000097) @ 0x000000007ffbe040 ACPI: DSDT (v001 A0347 A0347001 0x00000001 INTL 0x02002026) @ 0x0000000000000000 Scanning NUMA topology in Northbridge 24 Number of nodes 1 Node 0 MemBase 0000000000000000 Limit 000000007ffb0000 Using 20 for the hash shift. Max adder is 7ffb0000 Using node hash shift of 20 Bootmem setup node 0 0000000000000000-000000007ffb0000 On node 0 totalpages: 524111 DMA zone: 3999 pages, LIFO batch:1 Normal zone: 520112 pages, LIFO batch:31 HighMem zone: 0 pages, LIFO batch:1 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 15:3 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) Processor #1 15:3 APIC version 16 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 88000000 (gap: 80000000:60000000) Checking aperture... CPU 0: aperture @ dc000000 size 64 MB Built 1 zonelists Kernel command line: root=/dev/sda1 resume=/dev/sda5 irqpoll Misrouted IRQ fixup and polling support enabled This may significantly impact system performance Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 2000.184 MHz processor. Console: colour VGA+ 80x25 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Memory: 2057440k/2096832k available (2142k kernel code, 39004k reserved, 755k data, 232k init) Calibrating delay using timer specific routine.. 4011.50 BogoMIPS (lpj=8023008) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0(2) -> Node 0 -> Core 0 mtrr: v2.0 (20020519) Using local APIC timer interrupts. Detected 12.501 MHz APIC timer. softlockup thread 0 started up. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 4000.34 BogoMIPS (lpj=8000690) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1(2) -> Node 0 -> Core 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff -77 cycles, maxerr 545 cycles) Brought up 2 CPUs softlockup thread 1 started up. Disabling vsyscall due to use of PM timer time.c: Using PM based timekeeping. testing NMI watchdog ... OK. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 ACPI: Subsystem revision 20050902 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P9._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7.P7P8._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report agpgart: Detected AGP bridge 0 agpgart: AGP aperture is 64M @ 0xdc000000 PCI-DMA: Disabling IOMMU. PCI: Bridge: 0000:00:01.0 IO window: disabled. MEM window: fa900000-fe9fffff PREFETCH window: b7f00000-d7efffff PCI: Bridge: 0000:02:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:00.1 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:13.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:01.0 to 64 PCI: Setting latency timer of device 0000:00:13.0 to 64 PCI: Setting latency timer of device 0000:02:00.0 to 64 PCI: Setting latency timer of device 0000:02:00.1 to 64 IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1130906505.388:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API PCI: Setting latency timer of device 0000:02:00.0 to 64 pcie_portdrv_probe->Dev[287c:1106] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] PCI: Setting latency timer of device 0000:02:00.1 to 64 pcie_portdrv_probe->Dev[287d:1106] has invalid IRQ. Check vendor BIOS assign_interrupt_mode Found MSI capability Allocate Port Service[pcie00] Real Time Clock Driver v1.12 Linux agpgart interface v0.101 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:0f.1 PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 0 VP_IDE: chipset revision 7 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: Unknown VIA SouthBridge, disabling DMA. VP_IDE: IDE controller at PCI slot 0000:00:0f.1 VP_IDE: chipset revision 7 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: Unknown VIA SouthBridge, disabling DMA. mice: PS/2 mouse device common for all mice md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 3.39 NET: Registered protocol family 2 input: AT Translated Set 2 keyboard on isa0060/serio0 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 BIOS EDD facility v0.16 2004-Jun-25, 2 devices found md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem). SCSI subsystem initialized libata version 1.12 loaded. sata_sil version 0.9 ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 17 (level, low) -> IRQ 16 ata1: SATA max UDMA/100 cmd 0xFFFFC20000004C80 ctl 0xFFFFC20000004C8A bmdma 0xFFFFC20000004C00 irq 16 ata2: SATA max UDMA/100 cmd 0xFFFFC20000004CC0 ctl 0xFFFFC20000004CCA bmdma 0xFFFFC20000004C08 irq 16 input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 ata1: no device found (phy stat 00000000) scsi0 : sata_sil ata2: dev 0 cfg 49:2f00 82:74eb 83:7fea 84:4023 85:74e9 86:3c02 87:4023 88:203f ata2: dev 0 ATA, max UDMA/100, 488397168 sectors: lba48 ata2: dev 0 configured for UDMA/100 scsi1 : sata_sil Vendor: ATA Model: HDS722525VLSA80 Rev: V36O Type: Direct-Access ANSI SCSI revision: 05 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 < sda5 sda6 sda7 > Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 232k freed usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.3 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 17 PCI: Via IRQ fixup for 0000:00:10.0, from 11 to 1 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 17, io base 0x0000d480 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.1[C] -> GSI 22 (level, low) -> IRQ 18 PCI: Via IRQ fixup for 0000:00:10.1, from 5 to 2 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 18, io base 0x0000d400 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 19 PCI: Via IRQ fixup for 0000:00:10.2, from 10 to 3 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 19, io base 0x0000d080 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 20 PCI: Via IRQ fixup for 0000:00:10.3, from 3 to 4 uhci_hcd 0000:00:10.3: UHCI Host Controller uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.3: irq 20, io base 0x0000d000 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 22 (level, low) -> IRQ 18 PCI: Via IRQ fixup for 0000:00:10.4, from 5 to 2 ehci_hcd 0000:00:10.4: EHCI Host Controller ehci_hcd 0000:00:10.4: debug port 1 ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5 ehci_hcd 0000:00:10.4: irq 18, io mem 0xfebdf400 ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004 hub 5-0:1.0: USB hub found hub 5-0:1.0: 8 ports detected ts: Compaq touchscreen protocol output ACPI: Power Button (FF) [PWRF] ACPI: Sleep Button (CM) [SLPB] ACPI: Power Button (CM) [PWRB] ibm_acpi: ec object not found ACPI: CPU0 (power states: C1[C1]) ACPI: Processor [CPU1] (supports 16 throttling states) ACPI: CPU1 (power states: C1[C1]) EXT3 FS on sda1, internal journal Adding 2939852k swap on /dev/sda5. Priority:-1 extents:1 across:2939852k Linux video capture interface: v1.00 bttv: driver version 0.9.16 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture Probing IDE interface ide0... Probing IDE interface ide1... hdc: TDK DVDRW0404N, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 ahci version 1.01 ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 19 PCI: Via IRQ fixup for 0000:00:0f.0, from 10 to 3 ahci(0000:00:0f.0) AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci(0000:00:0f.0) flags: 64bit ncq pm led clo pmp pio slum part ata3: SATA max UDMA/133 cmd 0xFFFFC20000020D00 ctl 0x0 bmdma 0x0 irq 19 ata4: SATA max UDMA/133 cmd 0xFFFFC20000020D80 ctl 0x0 bmdma 0x0 irq 19 ata5: SATA max UDMA/133 cmd 0xFFFFC20000020E00 ctl 0x0 bmdma 0x0 irq 19 ata6: SATA max UDMA/133 cmd 0xFFFFC20000020E80 ctl 0x0 bmdma 0x0 irq 19 ata3: no device found (phy stat 00000000) scsi2 : ahci ata4: no device found (phy stat 00000000) scsi3 : ahci ata5: no device found (phy stat 00000000) scsi4 : ahci ata6 is slow to respond, please be patient ata6 failed to respond (30 secs) scsi5 : ahci kjournald starting. Commit interval 5 seconds EXT3 FS on sda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS on sda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. loop: loaded (max 8 devices) hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 floppy0: no floppy controllers found floppy0: no floppy controllers found NET: Registered protocol family 17 via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 20 PCI: Via IRQ fixup for 0000:00:12.0, from 11 to 4 eth0: VIA Rhine II at 0x1c400, 00:13:d4:a7:d6:43, IRQ 20. eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 40a1. eth0: link up, 100Mbps, half-duplex, lpa 0x40A1 parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP] parport0: irq 7 detected parport0: Printer, Hewlett-Packard HP LaserJet 6L lp0: using parport0 (polling). lp0: console ready usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver via82xx: Assuming DXS channels with 48k fixed sample rate. Please try dxs_support=5 option and report if it works on your machine. For more details, read ALSA-Configuration.txt. ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 18 PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 2 PCI: Setting latency timer of device 0000:00:11.5 to 64 cdrom: This disc doesn't have any tracks I recognize! NET: Registered protocol family 10 Disabled Privacy Extensions on device ffffffff80393380(lo) IPv6 over IPv4 tunneling driver eth0: no IPv6 routers present Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory NFSD: recovery directory /var/lib/nfs/v4recovery doesn't exist NFSD: starting 90-second grace period powernow-k8: Found 2 AMD Athlon 64 / Opteron processors (version 1.50.4) powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x8 (1350 mV) powernow-k8: 1 : fid 0xa (1800 MHz), vid 0xa (1300 mV) powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV) cpu_init done, current fid 0xc, vid 0x8 --huq684BweRXVnRxX--