From: Adrian Bunk <bunk@stusta.de>
To: jgarzik@pobox.com
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [2.6 patch] drivers/net/s2io.c: make functions static
Date: Sun, 6 Nov 2005 01:46:47 +0100 [thread overview]
Message-ID: <20051106004647.GD3668@stusta.de> (raw)
This patch makes needlessly global functions static.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
drivers/net/s2io.c | 43 +++++++++++++++++++++++--------------------
1 file changed, 23 insertions(+), 20 deletions(-)
--- linux-2.6.14-rc5-mm1-full/drivers/net/s2io.c.old 2005-11-06 00:19:48.000000000 +0100
+++ linux-2.6.14-rc5-mm1-full/drivers/net/s2io.c 2005-11-06 00:25:39.000000000 +0100
@@ -1515,7 +1515,7 @@
#define LINK_UP_DOWN_INTERRUPT 1
#define MAC_RMAC_ERR_TIMER 2
-int s2io_link_fault_indication(nic_t *nic)
+static int s2io_link_fault_indication(nic_t *nic)
{
if (nic->intr_type != INTA)
return MAC_RMAC_ERR_TIMER;
@@ -1847,7 +1847,7 @@
*
*/
-void fix_mac_address(nic_t * sp)
+static void fix_mac_address(nic_t * sp)
{
XENA_dev_config_t __iomem *bar0 = sp->bar0;
u64 val64;
@@ -2111,7 +2111,7 @@
* SUCCESS on success or an appropriate -ve value on failure.
*/
-int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
+static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
{
struct net_device *dev = nic->dev;
struct sk_buff *skb;
@@ -2796,7 +2796,7 @@
* SUCCESS on success and FAILURE on failure.
*/
-int wait_for_cmd_complete(nic_t * sp)
+static int wait_for_cmd_complete(nic_t * sp)
{
XENA_dev_config_t __iomem *bar0 = sp->bar0;
int ret = FAILURE, cnt = 0;
@@ -3042,7 +3042,7 @@
return SUCCESS;
}
-int wait_for_msix_trans(nic_t *nic, int i)
+static int wait_for_msix_trans(nic_t *nic, int i)
{
XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
u64 val64;
@@ -3081,7 +3081,7 @@
}
}
-void store_xmsi_data(nic_t *nic)
+static void store_xmsi_data(nic_t *nic)
{
XENA_dev_config_t *bar0 = (XENA_dev_config_t *) nic->bar0;
u64 val64, addr, data;
@@ -3253,7 +3253,7 @@
* file on failure.
*/
-int s2io_open(struct net_device *dev)
+static int s2io_open(struct net_device *dev)
{
nic_t *sp = dev->priv;
int err = 0;
@@ -3383,7 +3383,7 @@
* file on failure.
*/
-int s2io_close(struct net_device *dev)
+static int s2io_close(struct net_device *dev)
{
nic_t *sp = dev->priv;
int i;
@@ -3432,7 +3432,7 @@
* 0 on success & 1 on failure.
*/
-int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
+static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
{
nic_t *sp = dev->priv;
u16 frg_cnt, frg_len, i, queue, queue_len, put_off, get_off;
@@ -3878,7 +3878,7 @@
* pointer to the updated net_device_stats structure.
*/
-struct net_device_stats *s2io_get_stats(struct net_device *dev)
+static struct net_device_stats *s2io_get_stats(struct net_device *dev)
{
nic_t *sp = dev->priv;
mac_info_t *mac_control;
@@ -5071,19 +5071,20 @@
tmp_stats[i++] = stat_info->sw_stat.double_ecc_errs;
}
-int s2io_ethtool_get_regs_len(struct net_device *dev)
+static int s2io_ethtool_get_regs_len(struct net_device *dev)
{
return (XENA_REG_SPACE);
}
-u32 s2io_ethtool_get_rx_csum(struct net_device * dev)
+static u32 s2io_ethtool_get_rx_csum(struct net_device * dev)
{
nic_t *sp = dev->priv;
return (sp->rx_csum);
}
-int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
+
+static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
{
nic_t *sp = dev->priv;
@@ -5094,17 +5095,19 @@
return 0;
}
-int s2io_get_eeprom_len(struct net_device *dev)
+
+static int s2io_get_eeprom_len(struct net_device *dev)
{
return (XENA_EEPROM_SPACE);
}
-int s2io_ethtool_self_test_count(struct net_device *dev)
+static int s2io_ethtool_self_test_count(struct net_device *dev)
{
return (S2IO_TEST_LEN);
}
-void s2io_ethtool_get_strings(struct net_device *dev,
- u32 stringset, u8 * data)
+
+static void s2io_ethtool_get_strings(struct net_device *dev,
+ u32 stringset, u8 * data)
{
switch (stringset) {
case ETH_SS_TEST:
@@ -5120,7 +5123,7 @@
return (S2IO_STAT_LEN);
}
-int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
+static int s2io_ethtool_op_set_tx_csum(struct net_device *dev, u32 data)
{
if (data)
dev->features |= NETIF_F_IP_CSUM;
@@ -5173,7 +5176,7 @@
* function always return EOPNOTSUPPORTED
*/
-int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+static int s2io_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
{
return -EOPNOTSUPP;
}
@@ -5189,7 +5192,7 @@
* file on failure.
*/
-int s2io_change_mtu(struct net_device *dev, int new_mtu)
+static int s2io_change_mtu(struct net_device *dev, int new_mtu)
{
nic_t *sp = dev->priv;
reply other threads:[~2005-11-06 0:46 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051106004647.GD3668@stusta.de \
--to=bunk@stusta.de \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.