Re: 11-11-05 2.6.14 on AMCC Yosemite board(boot error)

["KylongMu" <mqy@263.net.cn>]

[-- Attachment #1.1: Type: text/plain, Size: 1313 bytes --]

Dear Denk:

 

>What you show is NOT the current code.

     By update with the most recent code, I did new test, and get

Different error message, that I can't solve it, pls check the attachment. 

 

> U-Boot 1.1.3 (Sep  7 2005 - 09:03:02)

 

>Please update U-Boot as well. You need this commit included:

 

>commit f190c11b1f22ff766e046588e5a7bb55f28ae305

>tree 1c41a7beffe8a293174dcb7c28b394349204a047

>parent 4d03a21f2329bb13a9661a23742ac0b77a7a76d5

>author Stefan Roese <sr@denx.de> Sat, 05 Nov 2005 15:50:16 +0100

>committer Stefan Roese <sr@denx.de> Sat, 05 Nov 2005 15:50:16 +0100

 

>    Adjust bd->bi_flashstart on Yellowstone & Yosemite to correct size

>    Patch by Stefan Roese, 05 Nov 2005

 

>I recommend to use the top-of-tree from the CVS or GIT repositories.

 

> Linux version 2.6.14 (root@dxp) (gcc version 4.0.0) #1 Fri Nov 11

> 09:51:04 CST 2005

 

>This is not the current code base. You should  use  top-of-tree  from

>GIT repository (commit ff1df84b3c3154ffdb646941e1c70d17554e3042); the

>kernel will display something like this:

 

>Linux version 2.6.14-gff1df84b ...

     I update my source code by "cg-update" directly, after many message and
file download it shows "full merged",

I think it is work. But the version only is 2.6.14. 

 

Thanks a lot!

 

Kylong Mu


[-- Attachment #1.2: Type: text/html, Size: 11347 bytes --]

[-- Attachment #2: bootmessage.txt --]
[-- Type: text/plain, Size: 8284 bytes --]

[root@dxp filesystem]# kermit -c
Connecting to /dev/ttyS0, speed 9600
 Escape character: Ctrl-\ (ASCII 28, FS): enabled
Type the escape character followed by C to get back,
or followed by ? to see other options.
----------------------------------------------------


U-Boot 1.1.4 (Nov 11 2005 - 19:35:30)

AMCC PowerPC 440EP Rev. B
Board: Yosemite - AMCC PPC440EP Evaluation Board
        VCO: 1066 MHz
        CPU: 533 MHz
        PLB: 133 MHz
        OPB: 66 MHz
        EPB: 66 MHz
        PCI: 66 MHz
I2C:   ready
DRAM:  256 MB
FLASH: 64 MB
PCI:   Bus Dev VenId DevId Class Int
In:    serial
Out:   serial
Err:   serial
Net:   ppc_4xx_eth0, ppc_4xx_eth1

Type "run flash_nfs" to mount root filesystem over NFS

Hit any key to stop autoboot:  0
=>
=> tftp 400000 uImage
ENET Speed is 100 Mbps - FULL duplex connection
Using ppc_4xx_eth0 device
TFTP from server 192.168.0.93; our IP address is 192.168.0.66
Filename 'uImage'.
Load address: 0x400000
Loading: #################################################################
         #################################################################
         #################################################################
         ##########################################
done
Bytes transferred = 1212624 (1280d0 hex)
=> tftp 4000000 ramdisk.img
Using ppc_4xx_eth0 device
TFTP from server 192.168.0.93; our IP address is 192.168.0.66
Filename 'ramdisk.img'.
Load address: 0x4000000
Loading: #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #################################################################
         #############################################
done
Bytes transferred = 8547050 (826aea hex)
=> bootm 400000 4000000
## Booting image at 00400000 ...
   Image Name:   Linux-2.6.14
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1212560 Bytes =  1.2 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 04000000 ...
   Image Name:   Yosemite Ramdisk
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    8546986 Bytes =  8.2 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Ramdisk to 0f713000, end 0ff39aaa ... OK
Linux version 2.6.14 (root@dxp) (gcc version 4.0.0) #1 Sat Nov 12 23:29:30 CST 2005
AMCC PowerPC 440EP Yosemite Platform
Built 1 zonelists
Kernel command line:
PID hash table entries: 2048 (order: 11, 32768 bytes)
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 248576k available (1852k kernel code, 604k data, 136k init, 0k highmem)
Mount-cache hash table entries: 512
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
softlockup thread 0 started up.
Freeing initrd memory: 8346k freed
NET: Registered protocol family 16
PCI: Probing PCI hardware
usbcore: registered new driver usbfs
usbcore: registered new driver hub
SCSI subsystem initialized
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
usbmon: debugfs is not available
ppc-soc-ohci ppc-soc-ohci.0: USB Host Controller
ppc-soc-ohci ppc-soc-ohci.0: new USB bus registered, assigned bus number 1
ppc-soc-ohci ppc-soc-ohci.0: irq 40, io mem 0xef601000
usb usb1: Product: USB Host Controller
usb usb1: Manufacturer: Linux 2.6.14 ohci_hcd
usb usb1: SerialNumber: PPC-SOC USB
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
pegasus: v0.6.12 (2005/01/13), Pegasus/Pegasus II USB Ethernet driver
usbcore: registered new driver pegasus
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at MMIO 0x0 (irq = 0) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 1) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
PPC 4xx OCP EMAC driver, version 3.53
mal0: initialized, 4 TX channels, 2 RX channels
zmii0: bridge in RMII mode
eth0: emac0, MAC 00:10:ec:00:87:40
eth0: found Generic MII PHY (0x01)
eth1: emac1, MAC 00:10:ec:00:87:47
eth1: found Generic MII PHY (0x03)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
AMCC440-flash: Found 1 x16 devices at 0x0 in 16-bit bank
 Amd/Fujitsu Extended Query Table at 0x0040
AMCC440-flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 5 MTD partitions on "AMCC440-flash":
0x00000000-0x00180000 : "kernel"
0x00180000-0x00400000 : "root"
0x00400000-0x03f40000 : "user"
0x03f40000-0x03f80000 : "env"
0x03f80000-0x04000000 : "u-boot"
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
TCP established hash table entries: 16384 (order: 4, 65536 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: Compressed image found at block 0
RAMDISK: incomplete write (-28 != 32768) 4194304
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 136k init
attempt to access beyond end of device
ram0: rw=0, want=32776, limit=8192
EXT2-fs error (device ram0): ext2_get_inode: unable to read inode block - inode=4001, block=16387
Warning: unable to open an initial console.
attempt to access beyond end of device
ram0: rw=0, want=49538, limit=8192
EXT2-fs error (device ram0): ext2_get_inode: unable to read inode block - inode=6003, block=24768
attempt to access beyond end of device
ram0: rw=0, want=65544, limit=8192
EXT2-fs error (device ram0): ext2_get_inode: unable to read inode block - inode=8001, block=32771
attempt to access beyond end of device
ram0: rw=0, want=16770, limit=8192
EXT2-fs error (device ram0): ext2_get_inode: unable to read inode block - inode=2001, block=8384
Kernel panic - not syncing: No init found.  Try passing init= option to kernel.
 <0>Rebooting in 180 seconds..