From: Chris Rankin <rankincj@yahoo.com>
To: linux-dvb-maintainer@linuxtv.org
Cc: linux-kernel@vger.kernel.org
Subject: [OOPS] Linux 2.6.14.2 and DVB USB
Date: Mon, 14 Nov 2005 21:05:29 +0000 (GMT) [thread overview]
Message-ID: <20051114210530.5657.qmail@web52901.mail.yahoo.com> (raw)
Hi,
My Linux 2.6.14.2-SMP kernel has just exploded on me, after I detached my USB2 DVB USB adapter.
This is on a UP PIII 1GHz Coppermine machine. There was a storm of:
dvb-usb: bulk message failed: -19 (2/0)
messages between the disconnection and the eventual oops. Note also that the DVB device was
attached to a USB2 hub.
Cheers,
Chris
usb 5-5.4: new high speed USB device using ehci_hcd and address 21
dvb-usb: found a 'Hauppauge WinTV-NOVA-T usb2' in cold state, will try to load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-nova-t-usb2-01.fw' to the 'Cypress FX2'
dvb-usb: Hauppauge WinTV-NOVA-T usb2 successfully initialized and connected.
usb 5-5.4: USB disconnect, address 21
dvb-usb: generic DVB-USB module successfully deinitialized and disconnected.
usb 5-5.4: new high speed USB device using ehci_hcd and address 22
dvb-usb: found a 'Hauppauge WinTV-NOVA-T usb2' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Hauppauge WinTV-NOVA-T usb2).
dvb-usb: MAC address: 00:0d:fe:03:77:33
dib3000: Found a DiBcom 3000P.
DVB: registering frontend 0 (DiBcom 3000P/M-C DVB-T)...
dvb-usb: schedule remote query interval to 100 msecs.
dvb-usb: Hauppauge WinTV-NOVA-T usb2 successfully initialized and connected.
usb 5-5.4: USB disconnect, address 22
dvb-usb: bulk message failed: -19 (2/0)
dvb-usb: bulk message failed: -19 (2/0)
dvb-usb: Hauppauge WinTV-NOVA-T usb2 successfully deinitialized and disconnected.
dvb-usb: bulk message failed: -19 (2/0)
dvb-usb: bulk message failed: -19 (2/0)
dvb-usb: bulk message failed: -19 (2/0)
...
dvb-usb: bulk message failed: -19 (2/0)
dvb-usb: bulk message failed: -19 (2/0)
dvb-usb: bulk message failed: -19 (2/0)
Unable to handle kernel paging request at virtual address bd83b3c4
printing eip:
bd83b3c4
*pde = 00000000
Oops: 0000 [#1]
SMP
Modules linked in: dvb_usb_nova_t_usb2 dvb_usb_dibusb_common dib3000mc dib3000_common dvb_usb
dvb_core firmware_class dvb_pll snd_usb_audio snd_usb_lib snd_seq_oss snd_seq_midi
snd_emu10k1_synth snd_emux_synth snd_seq_virmidi snd_seq_midi_event snd_seq_midi_emul mga drm ipv6
floppy snd_pcm_oss snd_mixer_oss snd_seq binfmt_misc matroxfb_maven i2c_matroxfb i2c_algo_bit loop
w83781d hwmon_vid i2c_isa eeprom ide_cd cdrom psmouse pcspkr button processor nfs nfsd exportfs
lockd parport_pc parport ehci_hcd eth1394 ohci_hcd ohci1394 ieee1394 8139too mii emu10k1_gp
gameport snd_emu10k1 snd_rawmidi snd_seq_device snd_ac97_codec snd_pcm snd_timer snd_ac97_bus
snd_page_alloc snd_util_mem snd_hwdep snd soundcore i2c_i801 i2c_core uhci_hcd usbcore i8xx_tco
intel_agp agpgart sunrpc ext3 jbd
CPU: 0
EIP: 0060:[<bd83b3c4>] Not tainted VLI
EFLAGS: 00010206 (2.6.14.2)
EIP is at 0xbd83b3c4
eax: 3d373417 ebx: 3d373417 ecx: d498b0b8 edx: c0354000
esi: 00000200 edi: c1405de0 ebp: bd83b3c4 esp: c0354fb0
ds: 007b es: 007b ss: 0068
Process setiathome_4.02 (pid: 12144, threadinfo=c0354000 task=d67375a0)
Stack: c0124de2 00000002 010b8f60 00000000 c0317cc0 c0354000 c0354fc8 c0354fc8
c034007b 00000001 c0317cc8 c034dee0 00000000 c0120ab0 0000000a d647efb0
00000046 0001a952 bf80d458 c010505f
Call Trace:
[<c0124de2>] run_timer_softirq+0xe2/0x1c0
[<c0120ab0>] __do_softirq+0x80/0x100
[<c010505f>] do_softirq+0x4f/0x60
=======================
[<c01038c4>] apic_timer_interrupt+0x1c/0x24
Code: Bad EIP value.
<0>Kernel panic - not syncing: Fatal exception in interrupt
___________________________________________________________
To help you stay safe and secure online, we've developed the all new Yahoo! Security Centre. http://uk.security.yahoo.com
next reply other threads:[~2005-11-14 21:05 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-14 21:05 Chris Rankin [this message]
2005-11-14 23:39 ` [OOPS] Linux 2.6.14.2 and DVB USB David Brigada
2005-11-14 23:51 ` Chris Rankin
2005-11-15 9:00 ` [linux-dvb-maintainer] " Patrick Boettcher
2005-11-15 15:28 ` Johannes Stezenbach
2005-11-15 15:46 ` Patrick Boettcher
2005-11-15 16:43 ` Johannes Stezenbach
2005-11-15 16:52 ` Patrick Boettcher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051114210530.5657.qmail@web52901.mail.yahoo.com \
--to=rankincj@yahoo.com \
--cc=linux-dvb-maintainer@linuxtv.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.