All of lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Gross <mgross@linux.intel.com>
To: Linus Torvalds <torvalds@osdl.org>, linux-kernel@vger.kernel.org
Cc: mark.gross@intel.com
Subject: [PATCH] minor clean up and update to tlclk.c for 2.6.15-rc2-git2
Date: Tue, 22 Nov 2005 11:21:31 -0800	[thread overview]
Message-ID: <200511221121.31437.mgross@linux.intel.com> (raw)

This time without the HTLM :(  

The following cleans up the telecom clock driver for the MPCBL0010.  
There was a small TPS change that this update relflects.
There where some non-static functions that are now static.

Signed-off-by: Mark Gross <mark.gross@intel.com>


diff -urN -X dontdiff linux-2.6.15-rc2-git2/drivers/char/tlclk.c linux-2.6.15-rc2-git2-tlclk/drivers/char/tlclk.c
--- linux-2.6.15-rc2-git2/drivers/char/tlclk.c 2005-11-22 09:45:38.000000000 -0800
+++ linux-2.6.15-rc2-git2-tlclk/drivers/char/tlclk.c 2005-11-22 10:41:42.000000000 -0800
@@ -34,7 +34,6 @@
 #include <linux/kernel.h> /* printk() */
 #include <linux/fs.h>  /* everything... */
 #include <linux/errno.h> /* error codes */
-#include <linux/delay.h> /* udelay */
 #include <linux/slab.h>
 #include <linux/ioport.h>
 #include <linux/interrupt.h>
@@ -165,7 +164,7 @@
 filter_select   :
 hardware_switching  :
 hardware_switching_mode  :
-interrupt_switch  :
+telclock_version  :
 mode_select   :
 refalign   :
 reset    :
@@ -173,7 +172,6 @@
 select_amcb2_transmit_clock :
 select_redundant_clock  :
 select_ref_frequency  :
-test_mode   :
 
 All sysfs interfaces are integers in hex format, i.e echo 99 > refalign
 has the same effect as echo 0x99 > refalign.
@@ -226,7 +224,7 @@
  return 0;
 }
 
-ssize_t tlclk_read(struct file *filp, char __user *buf, size_t count,
+static ssize_t tlclk_read(struct file *filp, char __user *buf, size_t count,
   loff_t *f_pos)
 {
  if (count < sizeof(struct tlclk_alarms))
@@ -242,7 +240,7 @@
  return  sizeof(struct tlclk_alarms);
 }
 
-ssize_t tlclk_write(struct file *filp, const char __user *buf, size_t count,
+static ssize_t tlclk_write(struct file *filp, const char __user *buf, size_t count,
      loff_t *f_pos)
 {
  return 0;
@@ -278,21 +276,21 @@
 static DEVICE_ATTR(current_ref, S_IRUGO, show_current_ref, NULL);
 
 
-static ssize_t show_interrupt_switch(struct device *d,
+static ssize_t show_telclock_version(struct device *d,
   struct device_attribute *attr, char *buf)
 {
  unsigned long ret_val;
  unsigned long flags;
 
  spin_lock_irqsave(&event_lock, flags);
- ret_val = inb(TLCLK_REG6);
+ ret_val = inb(TLCLK_REG5);
  spin_unlock_irqrestore(&event_lock, flags);
 
  return sprintf(buf, "0x%lX\n", ret_val);
 }
 
-static DEVICE_ATTR(interrupt_switch, S_IRUGO,
-  show_interrupt_switch, NULL);
+static DEVICE_ATTR(telclock_version, S_IRUGO,
+  show_telclock_version, NULL);
 
 static ssize_t show_alarms(struct device *d,
   struct device_attribute *attr,  char *buf)
@@ -436,26 +434,6 @@
 static DEVICE_ATTR(enable_clka0_output, S_IWUGO, NULL,
   store_enable_clka0_output);
 
-static ssize_t store_test_mode(struct device *d,
-  struct device_attribute *attr,  const char *buf, size_t count)
-{
- unsigned long flags;
- unsigned long tmp;
- unsigned char val;
-
- sscanf(buf, "%lX", &tmp);
- dev_dbg(d, "tmp = 0x%lX\n", tmp);
-
- val = (unsigned char)tmp;
- spin_lock_irqsave(&event_lock, flags);
- SET_PORT_BITS(TLCLK_REG4, 0xfd, 2);
- spin_unlock_irqrestore(&event_lock, flags);
-
- return strnlen(buf, count);
-}
-
-static DEVICE_ATTR(test_mode, S_IWUGO, NULL, store_test_mode);
-
 static ssize_t store_select_amcb2_transmit_clock(struct device *d,
   struct device_attribute *attr, const char *buf, size_t count)
 {
@@ -475,7 +453,7 @@
    SET_PORT_BITS(TLCLK_REG3, 0xc7, 0x38);
    switch (val) {
    case CLK_8_592MHz:
-    SET_PORT_BITS(TLCLK_REG0, 0xfc, 1);
+    SET_PORT_BITS(TLCLK_REG0, 0xfc, 2);
     break;
    case CLK_11_184MHz:
     SET_PORT_BITS(TLCLK_REG0, 0xfc, 0);
@@ -484,7 +462,7 @@
     SET_PORT_BITS(TLCLK_REG0, 0xfc, 3);
     break;
    case CLK_44_736MHz:
-    SET_PORT_BITS(TLCLK_REG0, 0xfc, 2);
+    SET_PORT_BITS(TLCLK_REG0, 0xfc, 1);
     break;
    }
   } else
@@ -653,9 +631,7 @@
  dev_dbg(d, "tmp = 0x%lX\n", tmp);
  spin_lock_irqsave(&event_lock, flags);
  SET_PORT_BITS(TLCLK_REG0, 0xf7, 0);
- udelay(2);
  SET_PORT_BITS(TLCLK_REG0, 0xf7, 0x08);
- udelay(2);
  SET_PORT_BITS(TLCLK_REG0, 0xf7, 0);
  spin_unlock_irqrestore(&event_lock, flags);
 
@@ -706,7 +682,7 @@
 
 static struct attribute *tlclk_sysfs_entries[] = {
  &dev_attr_current_ref.attr,
- &dev_attr_interrupt_switch.attr,
+ &dev_attr_telclock_version.attr,
  &dev_attr_alarms.attr,
  &dev_attr_enable_clk3a_output.attr,
  &dev_attr_enable_clk3b_output.attr,
@@ -714,7 +690,6 @@
  &dev_attr_enable_clka1_output.attr,
  &dev_attr_enable_clkb0_output.attr,
  &dev_attr_enable_clka0_output.attr,
- &dev_attr_test_mode.attr,
  &dev_attr_select_amcb1_transmit_clock.attr,
  &dev_attr_select_amcb2_transmit_clock.attr,
  &dev_attr_select_redundant_clock.attr,



-- 
--mgross
Intel Open Source Technology Center

                 reply	other threads:[~2005-11-22 19:21 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200511221121.31437.mgross@linux.intel.com \
    --to=mgross@linux.intel.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mark.gross@intel.com \
    --cc=torvalds@osdl.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.