From: Matthew Garrett <mjg59@srcf.ucam.org>
To: davej@codemonkey.org.uk
Cc: linux-kernel@vger.kernel.org
Subject: [PATCH] Add basic PM support for Nvidia and ATI AGP bridges
Date: Thu, 24 Nov 2005 06:00:30 +0000 [thread overview]
Message-ID: <20051124060030.GF28070@srcf.ucam.org> (raw)
I retrieved these from the swsusp2 patchset, but they seem to be
independently useful. As a result, I'm not sure who the original author
is - however, they seem to be pretty obvious.
## All lines beginning with `## DP:' are a description of the patch.
## DP: Description: Add suspend/resume support to ATI and Nvidia AGP bridges
## DP: Patch author: Unknown
## DP: Upstream status: Not submitted
. $(dirname $0)/DPATCH
@DPATCH@
diff -ruNp 210-agp-resume-support.patch-old/drivers/char/agp/ati-agp.c 210-agp-resume-support.patch-new/drivers/char/agp/ati-agp.c
--- 210-agp-resume-support.patch-old/drivers/char/agp/ati-agp.c 2005-06-20 11:46:51.000000000 +1000
+++ 210-agp-resume-support.patch-new/drivers/char/agp/ati-agp.c 2005-07-04 23:14:18.000000000 +1000
@@ -507,6 +507,33 @@ static void __devexit agp_ati_remove(str
agp_put_bridge(bridge);
}
+#ifdef CONFIG_PM
+
+static int agp_ati_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ pci_save_state (pdev);
+ pci_set_power_state (pdev, 3);
+
+ return 0;
+}
+
+static int agp_ati_resume(struct pci_dev *pdev)
+{
+ struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
+
+ /* set power state 0 and restore PCI space */
+ pci_set_power_state (pdev, 0);
+ pci_restore_state(pdev);
+
+ /* reconfigure AGP hardware again */
+ if (bridge->driver == &ati_generic_bridge)
+ return ati_configure();
+
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
static struct pci_device_id agp_ati_pci_table[] = {
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
@@ -526,6 +553,10 @@ static struct pci_driver agp_ati_pci_dri
.id_table = agp_ati_pci_table,
.probe = agp_ati_probe,
.remove = agp_ati_remove,
+#ifdef CONFIG_PM
+ .suspend = agp_ati_suspend,
+ .resume = agp_ati_resume,
+#endif
};
static int __init agp_ati_init(void)
diff -ruNp 210-agp-resume-support.patch-old/drivers/char/agp/nvidia-agp.c 210-agp-resume-support.patch-new/drivers/char/agp/nvidia-agp.c
--- 210-agp-resume-support.patch-old/drivers/char/agp/nvidia-agp.c 2005-06-20 11:46:51.000000000 +1000
+++ 210-agp-resume-support.patch-new/drivers/char/agp/nvidia-agp.c 2005-07-04 23:14:18.000000000 +1000
@@ -397,11 +397,40 @@ static struct pci_device_id agp_nvidia_p
MODULE_DEVICE_TABLE(pci, agp_nvidia_pci_table);
+#ifdef CONFIG_PM
+static int agp_nvidia_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ pci_save_state (pdev);
+ pci_set_power_state (pdev, 3);
+
+ return 0;
+}
+
+static int agp_nvidia_resume(struct pci_dev *pdev)
+{
+ struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
+
+ /* set power state 0 and restore PCI space */
+ pci_set_power_state (pdev, 0);
+ pci_restore_state(pdev);
+
+ /* reconfigure AGP hardware again */
+ if (bridge->driver == &nvidia_driver)
+ nvidia_configure();
+
+ return 0;
+}
+#endif
+
static struct pci_driver agp_nvidia_pci_driver = {
.name = "agpgart-nvidia",
.id_table = agp_nvidia_pci_table,
.probe = agp_nvidia_probe,
.remove = agp_nvidia_remove,
+#ifdef CONFIG_PM
+ .suspend = agp_nvidia_suspend,
+ .resume = agp_nvidia_resume,
+#endif
};
static int __init agp_nvidia_init(void)
--
Matthew Garrett | mjg59@srcf.ucam.org
next reply other threads:[~2005-11-24 6:00 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-24 6:00 Matthew Garrett [this message]
2005-11-24 11:33 ` [PATCH] Add basic PM support for Nvidia and ATI AGP bridges Rolf Eike Beer
2005-11-25 21:01 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051124060030.GF28070@srcf.ucam.org \
--to=mjg59@srcf.ucam.org \
--cc=davej@codemonkey.org.uk \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.