From mboxrd@z Thu Jan 1 00:00:00 1970 From: Helge Deller Subject: [parisc-linux] 2.6.15-rc5-pa2: "BUG: soft lockup detected on CPU#0!" Date: Mon, 5 Dec 2005 20:12:25 +0100 Message-ID: <200512052012.25492.deller@gmx.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" To: parisc-linux@lists.parisc-linux.org Return-Path: List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: parisc-linux-bounces@lists.parisc-linux.org Hello, 2.6.15-rc5-pa2 boots on all my machines (715/64, B160L, C3000) with the 32bit kernel, but on the B160L I see the BUG: soft lockup detected on CPU#0! message below. Any ideas ? PS: The message seems to be more informational, since the kernel still boots up fine. Helge ------------------ Linux version 2.6.15-rc5-pa2 (root@p100) (gcc version 3.3.4 (Debian 1:3.3.4-11)) #220 Mon Dec 5 17:39:15 CET 2 005 FP[0] enabled: Rev 1 Model 15 The 32-bit Kernel has started... Initialized PDC Console for debugging. Determining PDC firmware type: System Map. model 00005020 00000481 00000000 02020202 7794d7fe 100000f0 00000004 000000ba 000000ba vers 00000008 CPUID vers 15 rev 8 (0x000001e8) capabilities 0x2 model 9000/778/B160L Total Memory: 512 MB On node 0 totalpages: 131072 DMA zone: 131072 pages, LIFO batch:31 DMA32 zone: 0 pages, LIFO batch:0 Normal zone: 0 pages, LIFO batch:0 HighMem zone: 0 pages, LIFO batch:0 LED display at f0190001 registered Built 1 zonelists Kernel command line: HOME=/ root=/dev/sda3 ip=bootp console=ttyS0 TERM=vt102 palo_kernel=0/vmlinux PID hash table entries: 4096 (order: 12, 65536 bytes) Console: colour dummy device 160x64 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 524288k available Calibrating delay loop... 106.49 BogoMIPS (lpj=532480) Mount-cache hash table entries: 512 NET: Registered protocol family 16 EISA bus registered Searching for devices... Found devices: 1. Phantom PseudoBC GSC+ Port at 0xffc00000 [8] { 7, 0x0, 0x504, 0x00000 } 2. Dino PCI Bridge at 0xfff80000 [8/0] { 13, 0x3, 0x680, 0x0000a } 3. Merlin+ 132 Dino RS-232 at 0xfff83000 [8/0/63] { 10, 0x0, 0x022, 0x0008c } 4. Merlin 160 Core FW-SCSI at 0xfff8c000 [8/12] { 4, 0x0, 0x03d, 0x00089 } 5. Merlin 160 Core BA at 0xffd00000 [8/16] { 11, 0x0, 0x03d, 0x00081 }, additional addresses: 0xffd0c000 0xff c00000 6. Merlin 160 Core RS-232 at 0xffd05000 [8/16/4] { 10, 0x0, 0x03d, 0x0008c } 7. Merlin 160 Core SCSI at 0xffd06000 [8/16/5] { 10, 0x0, 0x03d, 0x00082 } 8. Merlin 160 Core LAN (802.3) at 0xffd07000 [8/16/6] { 10, 0x0, 0x03d, 0x0008a } 9. Merlin 160 Core Centronics at 0xffd02000 [8/16/0] { 10, 0x0, 0x03d, 0x00074 }, additional addresses: 0xffd 01000 0xffd03000 10. Merlin 160 Core Audio at 0xffd04000 [8/16/1] { 10, 0x4, 0x03d, 0x0007b } 11. Merlin 160 Core PS/2 Port at 0xffd08000 [8/16/7] { 10, 0x0, 0x03d, 0x00084 } 12. Merlin 160 Core PS/2 Port at 0xffd08100 [8/16/8] { 10, 0x0, 0x03d, 0x00084 } 13. Coral SGC Graphics at 0xfa000000 [8/4] { 10, 0x0, 0x004, 0x00077 } 14. Coral SGC Graphics at 0xf4000000 [8/8] { 10, 0x0, 0x004, 0x00077 } 15. Gecko GSC Core Graphics at 0xf8000000 [8/24] { 10, 0x0, 0x016, 0x00085 }, additional addresses: 0xf001100 0 16. Merlin L2 160 (9000/778/B160L) at 0xfffbe000 [62] { 0, 0x0, 0x502, 0x00004 } 17. Memory at 0xfffbf000 [63] { 1, 0x0, 0x067, 0x00009 } 18. Merlin+ 132 Dino PS/2 Port at 0xfff81000 [1] { 10, 0x0, 0x022, 0x00096 } CPU(s): 1 x PA7300LC (PCX-L2) at 160.000000 MHz BUG: soft lockup detected on CPU#0! YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI PSW: 00000000000001000000000000001111 Not tainted r00-03 00000000 10423810 10127878 0000000f r04-07 104e5810 fffff4b2 104e5810 104e5810 r08-11 10423810 0000000f 0000003c 10423f3c r12-15 10423810 104e4810 10425010 f0100000 r16-19 f0000c70 f0000194 1fffffe0 104230b4 r20-23 ffd05800 ffd05800 ffd05800 00000060 r24-27 ffffffff 00000b4e 00000b4e 10413010 r28-31 00000000 00000000 10a242c0 00000000 sr0-3 00000000 00000000 00000000 00000000 sr4-7 00000000 00000000 00000000 00000000 VZOUICununcqcqcqcqcqcrmunTDVZOUI FPSR: 00000000000011110000100000000000 FPER1: 00000000 fr00-03 0000000000000000 0000000000000000 0000000000000000 0000000000000000 fr04-07 10a21a1810423894 10423a081017efec 49c5f780104e48c8 10a21a1810423894 fr08-11 fffffff410a09000 0000000000000000 000000001039ec1c 103a771000000001 fr12-15 0000000100000000 104dd0101016a184 10a21a1810a186e0 0000004d00030000 fr16-19 00000000104e5663 104e501000000000 10423b38104e48c8 0000004d49c5f780 fr20-23 104e48c800000002 10a090001016a2a4 00000fd8000007ec 000017c40000000a fr24-27 00000000104e48c8 0000000210a09000 000000022fd11780 104e48c8104e5658 fr28-31 104e501000000400 10a2409c1017c774 10a2420a00000000 0000004d49c5f780 IASQ: 00000000 00000000 IAOQ: 1012787c 10127880 IIR: e81f1f97 ISR: 1016a184 IOR: 10a21a18 CPU: 0 CR30: 10a24000 CR31: 1047c000 ORIG_R28: 0000004d IAOQ[0]: release_console_sem+0x64/0x114 IAOQ[1]: release_console_sem+0x68/0x114 RP(r2): release_console_sem+0x60/0x114 Whole cache flush 22670 cycles, flushing 4294896 bytes 606813 cycles Setting cache flush threshold to 12a0 (1 CPUs online) Lasi version 0 at 0xffd00000 found. Dino version 3.1 found at 0xfff80000 Dino: No PCI devices enabled. SCSI subsystem initialized ....and it continues.... _______________________________________________ parisc-linux mailing list parisc-linux@lists.parisc-linux.org http://lists.parisc-linux.org/mailman/listinfo/parisc-linux