From: Jesper Juhl <jesper.juhl@gmail.com>
To: Linux Kernel Mailing List <linux-kernel@vger.kernel.org>
Cc: greg@kroah.com, kristen.c.accardi@intel.com,
Andrew Morton <akpm@osdl.org>,
Jesper Juhl <jesper.juhl@gmail.com>
Subject: [PATCH] Reduce nr of ptr derefs in drivers/pci/hotplug/pciehp_core.c
Date: Sun, 11 Dec 2005 06:41:42 +0100 [thread overview]
Message-ID: <200512110641.42992.jesper.juhl@gmail.com> (raw)
Here's a small patch to reduce the nr. of pointer dereferences in
drivers/pci/hotplug/pciehp_core.c
Benefits:
- micro speed optimization due to fewer pointer derefs
- generated code is slightly smaller
- small line length cleanup
- better readability
Please consider applying.
Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
---
drivers/pci/hotplug/pciehp_core.c | 90 +++++++++++++++++++++-----------------
1 files changed, 50 insertions(+), 40 deletions(-)
orig:
text data bss dec hex filename
4910 436 24 5370 14fa drivers/pci/hotplug/pciehp_core.o
patched:
text data bss dec hex filename
4889 436 24 5349 14e5 drivers/pci/hotplug/pciehp_core.o
--- linux-2.6.15-rc5-git1-orig/drivers/pci/hotplug/pciehp_core.c 2005-12-04 18:48:04.000000000 +0100
+++ linux-2.6.15-rc5-git1/drivers/pci/hotplug/pciehp_core.c 2005-12-11 05:46:58.000000000 +0100
@@ -103,7 +103,10 @@ static void release_slot(struct hotplug_
static int init_slots(struct controller *ctrl)
{
- struct slot *new_slot;
+ struct slot *slot;
+ struct hpc_ops *hpc_ops;
+ struct hotplug_slot *hotplug_slot;
+ struct hotplug_slot_info *hotplug_slot_info;
u8 number_of_slots;
u8 slot_device;
u32 slot_number;
@@ -114,59 +117,66 @@ static int init_slots(struct controller
slot_number = ctrl->first_slot;
while (number_of_slots) {
- new_slot = kmalloc(sizeof(*new_slot), GFP_KERNEL);
- if (!new_slot)
+ slot = kmalloc(sizeof(*slot), GFP_KERNEL);
+ if (!slot)
goto error;
- memset(new_slot, 0, sizeof(struct slot));
- new_slot->hotplug_slot =
- kmalloc(sizeof(*(new_slot->hotplug_slot)),
+ memset(slot, 0, sizeof(struct slot));
+ slot->hotplug_slot =
+ kmalloc(sizeof(*(slot->hotplug_slot)),
GFP_KERNEL);
- if (!new_slot->hotplug_slot)
+ if (!slot->hotplug_slot)
goto error_slot;
- memset(new_slot->hotplug_slot, 0, sizeof(struct hotplug_slot));
+ hotplug_slot = slot->hotplug_slot;
+ memset(hotplug_slot, 0, sizeof(struct hotplug_slot));
- new_slot->hotplug_slot->info =
- kmalloc(sizeof(*(new_slot->hotplug_slot->info)),
+ hotplug_slot->info =
+ kmalloc(sizeof(*(hotplug_slot->info)),
GFP_KERNEL);
- if (!new_slot->hotplug_slot->info)
+ if (!hotplug_slot->info)
goto error_hpslot;
- memset(new_slot->hotplug_slot->info, 0,
+ hotplug_slot_info = hotplug_slot->info;
+ memset(hotplug_slot_info, 0,
sizeof(struct hotplug_slot_info));
- new_slot->hotplug_slot->name = kmalloc(SLOT_NAME_SIZE,
- GFP_KERNEL);
- if (!new_slot->hotplug_slot->name)
+ hotplug_slot->name = kmalloc(SLOT_NAME_SIZE, GFP_KERNEL);
+ if (!hotplug_slot->name)
goto error_info;
- new_slot->ctrl = ctrl;
- new_slot->bus = ctrl->slot_bus;
- new_slot->device = slot_device;
- new_slot->hpc_ops = ctrl->hpc_ops;
+ slot->ctrl = ctrl;
+ slot->bus = ctrl->slot_bus;
+ slot->device = slot_device;
+ slot->hpc_ops = hpc_ops = ctrl->hpc_ops;
- new_slot->number = ctrl->first_slot;
- new_slot->hp_slot = slot_device - ctrl->slot_device_offset;
+ slot->number = ctrl->first_slot;
+ slot->hp_slot = slot_device - ctrl->slot_device_offset;
/* register this slot with the hotplug pci core */
- new_slot->hotplug_slot->private = new_slot;
- new_slot->hotplug_slot->release = &release_slot;
- make_slot_name(new_slot->hotplug_slot->name, SLOT_NAME_SIZE, new_slot);
- new_slot->hotplug_slot->ops = &pciehp_hotplug_slot_ops;
-
- new_slot->hpc_ops->get_power_status(new_slot, &(new_slot->hotplug_slot->info->power_status));
- new_slot->hpc_ops->get_attention_status(new_slot, &(new_slot->hotplug_slot->info->attention_status));
- new_slot->hpc_ops->get_latch_status(new_slot, &(new_slot->hotplug_slot->info->latch_status));
- new_slot->hpc_ops->get_adapter_status(new_slot, &(new_slot->hotplug_slot->info->adapter_status));
-
- dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x slot_device_offset=%x\n",
- new_slot->bus, new_slot->device, new_slot->hp_slot, new_slot->number, ctrl->slot_device_offset);
- result = pci_hp_register (new_slot->hotplug_slot);
+ hotplug_slot->private = slot;
+ hotplug_slot->release = &release_slot;
+ make_slot_name(hotplug_slot->name, SLOT_NAME_SIZE, slot);
+ hotplug_slot->ops = &pciehp_hotplug_slot_ops;
+
+ hpc_ops->get_power_status(slot,
+ &(hotplug_slot_info->power_status));
+ hpc_ops->get_attention_status(slot,
+ &(hotplug_slot_info->attention_status));
+ hpc_ops->get_latch_status(slot,
+ &(hotplug_slot_info->latch_status));
+ hpc_ops->get_adapter_status(slot,
+ &(hotplug_slot_info->adapter_status));
+
+ dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x "
+ "slot_device_offset=%x\n",
+ slot->bus, slot->device, slot->hp_slot, slot->number,
+ ctrl->slot_device_offset);
+ result = pci_hp_register(hotplug_slot);
if (result) {
err ("pci_hp_register failed with error %d\n", result);
goto error_name;
}
- new_slot->next = ctrl->slot;
- ctrl->slot = new_slot;
+ slot->next = ctrl->slot;
+ ctrl->slot = slot;
number_of_slots--;
slot_device++;
@@ -176,13 +186,13 @@ static int init_slots(struct controller
return 0;
error_name:
- kfree(new_slot->hotplug_slot->name);
+ kfree(hotplug_slot->name);
error_info:
- kfree(new_slot->hotplug_slot->info);
+ kfree(hotplug_slot_info);
error_hpslot:
- kfree(new_slot->hotplug_slot);
+ kfree(hotplug_slot);
error_slot:
- kfree(new_slot);
+ kfree(slot);
error:
return result;
}
next reply other threads:[~2005-12-11 5:41 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-11 5:41 Jesper Juhl [this message]
2005-12-11 13:08 ` [PATCH] Reduce nr of ptr derefs in drivers/pci/hotplug/pciehp_core.c Gregor Jasny
2005-12-11 13:19 ` Jesper Juhl
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200512110641.42992.jesper.juhl@gmail.com \
--to=jesper.juhl@gmail.com \
--cc=akpm@osdl.org \
--cc=greg@kroah.com \
--cc=kristen.c.accardi@intel.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.