[linux-lvm] lvm1 to lvm2 upgrade failed: confused on pv between sda1 and md5

[linux-lvm] lvm1 to lvm2 upgrade failed: confused on pv between sda1 and md5

[Marc MERLIN]

The VG is seen, but not the one LV in there

kernel: 2.6.14
  LVM version:     2.01.04 (2005-02-09)
  Library version: 1.01.00-ioctl (2005-01-17)
  Driver version:  4.4.0

My PV for /dev/dshelf3 is /dev/md5
The VG is found, but not the LV within it, apparently because LVM
selects /dev/sda1 instead of /dev/md5.

Sure enough, that drive is part of the raid set:
gargamel:~# cat /proc/mdstat | grep sda1
md5 : active raid5 sdg1[6] sdf1[5] sde1[4] sdd1[3] sdc1[2] sdb1[1] sda1[0]

vgdisplay -vv (abbridged) gives:
      /dev/sda1: lvm1 label detected
      /dev/md2: lvm1 label detected
      /dev/md4: lvm2 label detected
      /dev/md5: lvm1 label detected
      Duplicate PV 9O6xt9OyES075HwBQHdtmGRb7vD4EOy8 on /dev/sda1 - using md /dev/md5
      /dev/sdt1: lvm2 label detected
      Ignoring duplicate PV ROSSavso6qtpjO7fw93bO7cMntbJ09xz on /dev/sdt1 - using md /dev/md4
      /dev/sdh3: lvm1 label detected
      Ignoring duplicate PV LpvPCRIdjGlQuX4FCWWArPhv7Vv3Cv08 on /dev/sdh3 - using md /dev/md2
      /dev/sdl3: lvm1 label detected
      Ignoring duplicate PV LpvPCRIdjGlQuX4FCWWArPhv7Vv3Cv08 on /dev/sdl3 - using md /dev/md2

      Found /dev/sda1 in VG dshelf3
      Unlocking /var/lock/lvm/V_dshelf3
  --- Volume group ---
  VG Name               dshelf3
  System ID             gargamel.svh.merlins.org1013790828
  Format                lvm1
  VG Access             read/write
  VG Status             resizable
  MAX LV                255
  Cur LV                0
  Open LV               0
  Max PV                255
  Cur PV                1
  Act PV                1
  VG Size               410.06 GB
  PE Size               64.00 MB
  Total PE              6561
  Alloc PE / Size       6400 / 400.00 GB
  Free  PE / Size       161 / 10.06 GB
  VG UUID               6j8wL4-3n1y-WHL3-HM61-IyuS-6vJW-pubTQo
   
  --- Physical volumes ---
  PV Name               /dev/sda1     
  PV UUID               9O6xt9-OyES-075H-wBQH-dtmG-Rb7v-D4EOy8
  PV Status             allocatable
  Total PE / Free PE    6561 / 161

gargamel:~# vgchange -a y dshelf3
  0 logical volume(s) in volume group "dshelf3" now active

Can I help LVM2 find the LV in there somehow?

BTW, note that LVM2 did say "using md /dev/md5 (instead of /dev/sda1) and 
still showed /dev/sda1 as a PV for dshelf3 instead

Thanks
Marc
-- 
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems & security ....
                                      .... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/   |   Finger marc_f@merlins.org for PGP key

Re: [linux-lvm] lvm1 to lvm2 upgrade failed: confused on pv between sda1 and md5

[Alasdair G Kergon]

Hi Marc,

On Mon, Dec 12, 2005 at 10:20:45AM -0800, Marc MERLIN wrote:
>   LVM version:     2.01.04 (2005-02-09)

There have been many bug fixes since that release.

First of all, try the last 2.01.* release (2.01.15) and see 
whether that fixes it.

>   Library version: 1.01.00-ioctl (2005-01-17)

Also suggest updating device-mapper to 1.01.05.

Check that you have in lvm.conf devices section:
  md_component_detection = 1 
(i.e. not = 0)

If you edit lvm.conf, run 'vgscan' afterwards.

If things still don't work, check your metadata backups
and archives in /etc/lvm and see if they show the LV
disappearing.  If you want me to investigate, tar up that 
directory and email it to me.

Alasdair
-- 
agk@redhat.com

Re: [linux-lvm] lvm1 to lvm2 upgrade failed: confused on pv between sda1 and md5

[Marc MERLIN]

On Mon, Dec 12, 2005 at 06:44:08PM +0000, Alasdair G Kergon wrote:
> Hi Marc,
> 
> On Mon, Dec 12, 2005 at 10:20:45AM -0800, Marc MERLIN wrote:
> >   LVM version:     2.01.04 (2005-02-09)
> 
> There have been many bug fixes since that release.
> 
> First of all, try the last 2.01.* release (2.01.15) and see 
> whether that fixes it.
> 
> >   Library version: 1.01.00-ioctl (2005-01-17)
> 
> Also suggest updating device-mapper to 1.01.05.
> 
> Check that you have in lvm.conf devices section:
>   md_component_detection = 1 
> (i.e. not = 0)
 
That was the one, thank you so much.
For some reason, the debian package I got had this set to 0 by default

Ideally, I would have known about this file, but I didn't realize it
appeared between lvm1 and lvm2

Thanks for your help (the VG is indeed up and happy now)

Marc
-- 
"A mouse is a device used to point at the xterm you want to type in" - A.S.R.
Microsoft is to operating systems & security ....
                                      .... what McDonalds is to gourmet cooking
Home page: http://marc.merlins.org/   |   Finger marc_f@merlins.org for PGP key

Re: [linux-lvm] lvm1 to lvm2 upgrade failed: confused on pv between sda1 and md5

[Alasdair G Kergon]

On Mon, Dec 12, 2005 at 06:20:27PM -0800, Marc MERLIN wrote:
> That was the one, thank you so much.
> For some reason, the debian package I got had this set to 0 by default
 
When it was first introduced, the md detection didn't handle some cases
very well, so Debian decided to turn it off by default.  The changes to
handle those cases correctly were made over a year ago, but Debian still 
doesn't enable it.

  http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=278180

Alasdair
-- 
agk@redhat.com