From: Bernhard Rosenkraenzer <bero@arklinux.org>
To: linux-kernel@vger.kernel.org
Subject: sata_uli fails to see harddisks on an ASRock 939Dual-SATA2 board
Date: Wed, 14 Dec 2005 15:01:09 +0100 [thread overview]
Message-ID: <200512141501.10093.bero@arklinux.org> (raw)
On an ASRock 939Dual-SATA2 board, the sata_uli driver recognizes the onboard
SATA controller (PCI ID 10b9:5289 rev 10, Subsystem 1849:5289), but fails to
see an attached harddisk (the BIOS identifies the harddisk correctly, so a
hardware failure is unlikely). sata_uli apparently sees _something_ is
attached, but doesn't get further. dmesg says:
libata version 1.20 loaded.
sata_uli 0000:00:12.1: version 0.5
GSI 18 sharing vector 0xD1 and IRQ 18
ACPI: PCI Interrupt 0000:00:12.1[A] -> GSI 19 (level, low) -> IRQ 209
ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE082 bmdma 0xD880 irq 209
ata2: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD888 irq 209
ata1: SATA link up 1.5 Gbps (SStatus 113)
scsi0 : sata_uli
ata2: SATA link down (SStatus 0)
scsi1 : sata_uli
No disks are found, even though the link (on ata1) is detected.
Verified both with an x86 and an x86_64 kernel, and both 2.6.15-rc5 and
2.6.15-rc5-mm2.
Any ideas?
next reply other threads:[~2005-12-14 14:03 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-14 14:01 Bernhard Rosenkraenzer [this message]
2005-12-14 17:11 ` sata_uli fails to see harddisks on an ASRock 939Dual-SATA2 board Randy.Dunlap
2005-12-14 21:11 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200512141501.10093.bero@arklinux.org \
--to=bero@arklinux.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.