[patch 0/4] 4 patches for 2.6.15

[patch 0/4] 4 patches for 2.6.15

[Greg Kroah-Hartman]

Hi,

Here are 4 patches against your latest 2.6.15-git tree.  They fix the
following problems and should all go in for 2.6.15:
	- kernel oops in pci code for some thinkpads and other boxes.
	- kernel oops if pci express and pci express hotplug is built
	  into the kernel, instead of a module.
	- build breakage in a i2c driver.
	- memory barriers are needed for USB uhci driver in
	  suspend/resume path, as they were accidentally dropped in a
	  previous patch.

thanks,

greg k-h

[lm-sensors] [patch 1/4] i2c: Fix i2c-mv64xxx compilation error

[Greg Kroah-Hartman]

From: "Mark A. Greer" <mgreer at mvista.com>

The busses/i2c-mv64xxx.c driver doesn't currently compile because of an
incorrect argument to dev_err().  This patch fixes that.

Signed-off-by: Mark A. Greer <mgreer at mvista.com>
Signed-off-by: Jean Delvare <khali at linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh at suse.de>
---
 drivers/i2c/busses/i2c-mv64xxx.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

--- gregkh-2.6.orig/drivers/i2c/busses/i2c-mv64xxx.c
+++ gregkh-2.6/drivers/i2c/busses/i2c-mv64xxx.c
@@ -529,14 +529,15 @@ mv64xxx_i2c_probe(struct platform_device
 	i2c_set_adapdata(&drv_data->adapter, drv_data);
 
 	if (request_irq(drv_data->irq, mv64xxx_i2c_intr, 0,
-		MV64XXX_I2C_CTLR_NAME, drv_data)) {
-
-		dev_err(dev, "mv64xxx: Can't register intr handler "
-			"irq: %d\n", drv_data->irq);
+			MV64XXX_I2C_CTLR_NAME, drv_data)) {
+		dev_err(&drv_data->adapter.dev,
+			"mv64xxx: Can't register intr handler irq: %d\n",
+			drv_data->irq);
 		rc = -EINVAL;
 		goto exit_unmap_regs;
 	} else if ((rc = i2c_add_adapter(&drv_data->adapter)) != 0) {
-		dev_err(dev, "mv64xxx: Can't add i2c adapter, rc: %d\n", -rc);
+		dev_err(&drv_data->adapter.dev,
+			"mv64xxx: Can't add i2c adapter, rc: %d\n", -rc);
 		goto exit_free_irq;
 	}
 

--

[patch 1/4] i2c: Fix i2c-mv64xxx compilation error

[Greg Kroah-Hartman]

[-- Attachment #1: i2c-mv64xxx-compilation-error-fix.patch --]
[-- Type: text/plain, Size: 1272 bytes --]

From: "Mark A. Greer" <mgreer@mvista.com>

The busses/i2c-mv64xxx.c driver doesn't currently compile because of an
incorrect argument to dev_err().  This patch fixes that.

Signed-off-by: Mark A. Greer <mgreer@mvista.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/i2c/busses/i2c-mv64xxx.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

--- gregkh-2.6.orig/drivers/i2c/busses/i2c-mv64xxx.c
+++ gregkh-2.6/drivers/i2c/busses/i2c-mv64xxx.c
@@ -529,14 +529,15 @@ mv64xxx_i2c_probe(struct platform_device
 	i2c_set_adapdata(&drv_data->adapter, drv_data);
 
 	if (request_irq(drv_data->irq, mv64xxx_i2c_intr, 0,
-		MV64XXX_I2C_CTLR_NAME, drv_data)) {
-
-		dev_err(dev, "mv64xxx: Can't register intr handler "
-			"irq: %d\n", drv_data->irq);
+			MV64XXX_I2C_CTLR_NAME, drv_data)) {
+		dev_err(&drv_data->adapter.dev,
+			"mv64xxx: Can't register intr handler irq: %d\n",
+			drv_data->irq);
 		rc = -EINVAL;
 		goto exit_unmap_regs;
 	} else if ((rc = i2c_add_adapter(&drv_data->adapter)) != 0) {
-		dev_err(dev, "mv64xxx: Can't add i2c adapter, rc: %d\n", -rc);
+		dev_err(&drv_data->adapter.dev,
+			"mv64xxx: Can't add i2c adapter, rc: %d\n", -rc);
 		goto exit_free_irq;
 	}
 

--

[patch 2/4] PCI express must be initialized before PCI hotplug

[Greg Kroah-Hartman]

[-- Attachment #1: pci-express-must-be-initialized-before-pci-hotplug.patch --]
[-- Type: text/plain, Size: 962 bytes --]

From: Milton Miller <miltonm@bga.com>

PCI express hotplug uses the pcieportbus driver so pcie must be
initialized before hotplug/.  This patch changes the link order.

Signed-Off-By: Milton Miller <miltonm@bga.com>
Acked-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>


---
 drivers/pci/Makefile |    7 +++----
 1 file changed, 3 insertions(+), 4 deletions(-)

--- gregkh-2.6.orig/drivers/pci/Makefile
+++ gregkh-2.6/drivers/pci/Makefile
@@ -6,6 +6,9 @@ obj-y		+= access.o bus.o probe.o remove.
 			pci-driver.o search.o pci-sysfs.o rom.o setup-res.o
 obj-$(CONFIG_PROC_FS) += proc.o
 
+# Build PCI Express stuff if needed
+obj-$(CONFIG_PCIEPORTBUS) += pcie/
+
 obj-$(CONFIG_HOTPLUG) += hotplug.o
 
 # Build the PCI Hotplug drivers if we were asked to
@@ -40,7 +43,3 @@ endif
 ifeq ($(CONFIG_PCI_DEBUG),y)
 EXTRA_CFLAGS += -DDEBUG
 endif
-
-# Build PCI Express stuff if needed
-obj-$(CONFIG_PCIEPORTBUS) += pcie/
-

--

[patch 3/4] PCI: Fix dumb bug in mmconfig fix

[Greg Kroah-Hartman]

[-- Attachment #1: fix-dumb-bug-in-mmconfig-fix.patch --]
[-- Type: text/plain, Size: 917 bytes --]

From: Andi Kleen <ak@suse.de>

Use correct address when referencing mmconfig aperture while checking
for broken MCFG.  This was a typo when porting the code from 64bit to
32bit.  It caused oopses at boot on some ThinkPads.

Should definitely go into 2.6.15.

Signed-off-by: Andi Kleen <ak@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 arch/i386/pci/mmconfig.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- gregkh-2.6.orig/arch/i386/pci/mmconfig.c
+++ gregkh-2.6/arch/i386/pci/mmconfig.c
@@ -155,7 +155,7 @@ static __init void unreachable_devices(v
 		addr = get_base_addr(0, 0, PCI_DEVFN(i, 0));
 		if (addr != 0)
 			pci_exp_set_dev_base(addr, 0, PCI_DEVFN(i, 0));
-		if (addr == 0 || readl((u32 __iomem *)addr) != val1)
+		if (addr == 0 || readl((u32 __iomem *)mmcfg_virt_addr) != val1)
 			set_bit(i, fallback_slots);
 		spin_unlock_irqrestore(&pci_config_lock, flags);
 	}

--

[patch 4/4] UHCI: add missing memory barriers

[Greg Kroah-Hartman]

[-- Attachment #1: uhci-add-missing-memory-barriers.patch --]
[-- Type: text/plain, Size: 969 bytes --]

From: Alan Stern <stern@rowland.harvard.edu>

This patch (as617) adds a couple of memory barriers that Ben H. forgot in
his recent suspend/resume fix.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/host/uhci-hcd.c |    2 ++
 1 file changed, 2 insertions(+)

--- gregkh-2.6.orig/drivers/usb/host/uhci-hcd.c
+++ gregkh-2.6/drivers/usb/host/uhci-hcd.c
@@ -717,6 +717,7 @@ static int uhci_suspend(struct usb_hcd *
 	 * at the source, so we must turn off PIRQ.
 	 */
 	pci_write_config_word(to_pci_dev(uhci_dev(uhci)), USBLEGSUP, 0);
+	mb();
 	clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
 	uhci->hc_inaccessible = 1;
 	hcd->poll_rh = 0;
@@ -738,6 +739,7 @@ static int uhci_resume(struct usb_hcd *h
 	 * really don't want to keep a stale HCD_FLAG_HW_ACCESSIBLE=0
 	 */
 	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	mb();
 
 	if (uhci->rh_state == UHCI_RH_RESET)	/* Dead */
 		return 0;

--

[patch 0/2] 2 USB patches for 2.6.15

[Greg Kroah-Hartman]

Hi,

Here are 2 patches against your latest 2.6.15-git tree.  They fix the
following problems:
	- bugfix to allow some USB disk enclosure devices to work
	  properly.
	- small workaround to allow suspend to continue, even if the USB
	  driver attached to a device does not have a suspend method
	  (this preserves the old behavior, and is annoying a lot of
	  people.)

thanks,

greg k-h

[patch 1/2] USB Storage: Force starget->scsi_level in usb-storage scsiglue.c

[Greg Kroah-Hartman]

From: Paul Walmsley <paul@booyaka.com>

When the usb-storage module forces sdev->scsi_level to SCSI_2, it should
also force starget->scsi_level to the same value.  Otherwise, the SCSI
layer may attempt to issue SCSI-3 commands to the device, such as REPORT
LUNS, which it cannot handle.  This can prevent the device from working
with Linux.

The AMS Venus DS3 DS2316SU2S SATA-to-SATA+USB enclosure, based on the
Oxford Semiconductor OXU921S chip, requires this patch to function
correctly on Linux.  The enclosure reports a SCSI-3 SPC-2 command set
level, but does not correctly handle the REPORT LUNS SCSI command -
probably due to a bug in its firmware.

It seems likely that other USB storage enclosures with similar bugs will
also benefit from this patch.

Tony Lindgren <tony@atomide.com> collaborated in the development of this
patch.

Signed-off-by: Paul Walmsley <paul@booyaka.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/storage/scsiglue.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- gregkh-2.6.orig/drivers/usb/storage/scsiglue.c
+++ gregkh-2.6/drivers/usb/storage/scsiglue.c
@@ -109,7 +109,7 @@ static int slave_configure(struct scsi_d
 	 * data comes from.
 	 */
 	if (sdev->scsi_level < SCSI_2)
-		sdev->scsi_level = SCSI_2;
+		sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2;
 
 	/* According to the technical support people at Genesys Logic,
 	 * devices using their chips have problems transferring more than
@@ -162,7 +162,7 @@ static int slave_configure(struct scsi_d
 		 * a Get-Max-LUN request, we won't lose much by setting the
 		 * revision level down to 2.  The only devices that would be
 		 * affected are those with sparse LUNs. */
-		sdev->scsi_level = SCSI_2;
+		sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2;
 
 		/* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
 		 * Hardware Error) when any low-level error occurs,

[patch 2/2] usbcore: allow suspend/resume even if drivers don't support it

[Greg Kroah-Hartman]

From: Alan Stern <stern@rowland.harvard.edu>

This patch (as618) changes usbcore to prevent derailing the
suspend/resume sequence when a USB driver doesn't include support for
it.  This is a workaround rather than a true fix; the core needs to be
changed so that URB submissions from suspended drivers can be refused
and outstanding URBs cancelled.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

---
 drivers/usb/core/usb.c |    9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

--- gregkh-2.6.orig/drivers/usb/core/usb.c
+++ gregkh-2.6/drivers/usb/core/usb.c
@@ -1432,7 +1432,8 @@ static int usb_generic_suspend(struct de
 			mark_quiesced(intf);
 	} else {
 		// FIXME else if there's no suspend method, disconnect...
-		dev_warn(dev, "no %s?\n", "suspend");
+		dev_warn(dev, "no suspend for driver %s?\n", driver->name);
+		mark_quiesced(intf);
 		status = 0;
 	}
 	return status;
@@ -1460,8 +1461,10 @@ static int usb_generic_resume(struct dev
 	}
 
 	if ((dev->driver == NULL) ||
-	    (dev->driver_data == &usb_generic_driver_data))
+	    (dev->driver_data == &usb_generic_driver_data)) {
+		dev->power.power_state.event = PM_EVENT_FREEZE;
 		return 0;
+	}
 
 	intf = to_usb_interface(dev);
 	driver = to_usb_driver(dev->driver);
@@ -1481,7 +1484,7 @@ static int usb_generic_resume(struct dev
 			mark_quiesced(intf);
 		}
 	} else
-		dev_warn(dev, "no %s?\n", "resume");
+		dev_warn(dev, "no resume for driver %s?\n", driver->name);
 	return 0;
 }
 

[patch 0/4] Small fixes for 2.6.15-rc5

[Greg Kroah-Hartman]

Here are some small fixes for your current 2.6.15-rc5 git tree.  They
have all been in the past -mm releases, and fix problems.  The PCI
patches were also sent by Andi to you, so you might receive them through
his emails too.

Here's the diffstat of the combined patches.

 arch/i386/pci/direct.c           |    8 +-
 arch/i386/pci/mmconfig.c         |  141 ++++++++++++++++++++++++++++++++-------
 arch/i386/pci/pci.h              |   14 +++
 arch/x86_64/pci/mmconfig.c       |  133 ++++++++++++++++++++++++++++++------
 drivers/i2c/busses/i2c-mv64xxx.c |   25 +++---
 drivers/usb/host/uhci-hcd.c      |    6 +
 6 files changed, 261 insertions(+), 66 deletions(-)

thanks,

greg k-h

[lm-sensors] [patch 1/4] i2c: Fix i2c-mv64xxx compilation error

[Greg Kroah-Hartman]

From: "Mark A. Greer" <mgreer at mvista.com>

The busses/i2c-mv64xxx.c driver doesn't currently compile because of an
incorrect argument to dev_err().  This patch fixes that.

Signed-off-by: Mark A. Greer <mgreer at mvista.com>
Signed-off-by: Jean Delvare <khali at linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh at suse.de>
---
 drivers/i2c/busses/i2c-mv64xxx.c |   11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

--- greg-2.6.orig/drivers/i2c/busses/i2c-mv64xxx.c
+++ greg-2.6/drivers/i2c/busses/i2c-mv64xxx.c
@@ -529,14 +529,15 @@ mv64xxx_i2c_probe(struct platform_device
 	i2c_set_adapdata(&drv_data->adapter, drv_data);
 
 	if (request_irq(drv_data->irq, mv64xxx_i2c_intr, 0,
-		MV64XXX_I2C_CTLR_NAME, drv_data)) {
-
-		dev_err(dev, "mv64xxx: Can't register intr handler "
-			"irq: %d\n", drv_data->irq);
+			MV64XXX_I2C_CTLR_NAME, drv_data)) {
+		dev_err(&drv_data->adapter.dev,
+			"mv64xxx: Can't register intr handler irq: %d\n",
+			drv_data->irq);
 		rc = -EINVAL;
 		goto exit_unmap_regs;
 	} else if ((rc = i2c_add_adapter(&drv_data->adapter)) != 0) {
-		dev_err(dev, "mv64xxx: Can't add i2c adapter, rc: %d\n", -rc);
+		dev_err(&drv_data->adapter.dev,
+			"mv64xxx: Can't add i2c adapter, rc: %d\n", -rc);
 		goto exit_free_irq;
 	}
 

--