From: Marcelo Tosatti <marcelo.tosatti@cyclades.com>
To: Matt Porter <mporter@kernel.crashing.org>
Cc: linux-ppc-embedded <linuxppc-embedded@ozlabs.org>
Subject: [PATCH] powerpc: generalize PPC44x_PIN_SIZE
Date: Thu, 29 Dec 2005 18:40:40 -0200 [thread overview]
Message-ID: <20051229204040.GA9751@dmt.cnet> (raw)
Hi,
The following patch generalizes PPC44x_PIN_SIZE by changing it to
PPC_PIN_SIZE, which can be defined by any board to automatically adjust
VMALLOC_START, avoiding conflicts with pinned virtual space.
Also define it for 8xx.
Matt, please review.
diff --git a/arch/ppc/mm/44x_mmu.c b/arch/ppc/mm/44x_mmu.c
index 3d79ce2..e0152a9 100644
--- a/arch/ppc/mm/44x_mmu.c
+++ b/arch/ppc/mm/44x_mmu.c
@@ -104,7 +104,7 @@ unsigned long __init mmu_mapin_ram(void)
/* Determine number of entries necessary to cover lowmem */
pinned_tlbs = (unsigned int)
- (_ALIGN(total_lowmem, PPC44x_PIN_SIZE) >> PPC44x_PIN_SHIFT);
+ (_ALIGN(total_lowmem, PPC_PIN_SIZE) >> PPC44x_PIN_SHIFT);
/* Write upper watermark to save location */
tlb_44x_hwater = PPC44x_LOW_SLOT - pinned_tlbs;
@@ -112,7 +112,7 @@ unsigned long __init mmu_mapin_ram(void)
/* If necessary, set additional pinned TLBs */
if (pinned_tlbs > 1)
for (i = (PPC44x_LOW_SLOT-(pinned_tlbs-1)); i < PPC44x_LOW_SLOT; i++) {
- unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC44x_PIN_SIZE;
+ unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC_PIN_SIZE;
ppc44x_pin_tlb(i, phys_addr+PAGE_OFFSET, phys_addr);
}
diff --git a/include/asm-ppc/ibm44x.h b/include/asm-ppc/ibm44x.h
index f835066..3acc382 100644
--- a/include/asm-ppc/ibm44x.h
+++ b/include/asm-ppc/ibm44x.h
@@ -29,7 +29,7 @@
/* TLB entry offset/size used for pinning kernel lowmem */
#define PPC44x_PIN_SHIFT 28
-#define PPC44x_PIN_SIZE (1 << PPC44x_PIN_SHIFT)
+#define PPC_PIN_SIZE (1 << PPC44x_PIN_SHIFT)
/* Lowest TLB slot consumed by the default pinned TLBs */
#define PPC44x_LOW_SLOT 63
diff --git a/include/asm-ppc/mpc8xx.h b/include/asm-ppc/mpc8xx.h
index 46f159c..73ec9a6 100644
--- a/include/asm-ppc/mpc8xx.h
+++ b/include/asm-ppc/mpc8xx.h
@@ -113,6 +113,8 @@ enum ppc_sys_devices {
MPC8xx_CPM_USB,
};
+#define PPC_PIN_SIZE (24 * 1024 * 1024) /* 24Mbytes of data pinned */
+
#ifndef BOARD_CHIP_NAME
#define BOARD_CHIP_NAME ""
#endif
diff --git a/include/asm-ppc/pgtable.h b/include/asm-ppc/pgtable.h
index 6d1c39e..3f8c38e 100644
--- a/include/asm-ppc/pgtable.h
+++ b/include/asm-ppc/pgtable.h
@@ -12,6 +12,7 @@
#include <asm/processor.h> /* For TASK_SIZE */
#include <asm/mmu.h>
#include <asm/page.h>
+#include <asm/irq.h> /* For sub-arch specific PPC_PIN_SIZE */
struct mm_struct;
extern unsigned long va_to_phys(unsigned long address);
@@ -127,9 +128,8 @@ extern unsigned long ioremap_bot, iorema
* of RAM. -- Cort
*/
#define VMALLOC_OFFSET (0x1000000) /* 16M */
-#ifdef CONFIG_44x
-#include <asm/ibm44x.h>
-#define VMALLOC_START (((_ALIGN((long)high_memory, PPC44x_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
+#ifdef PPC_PIN_SIZE
+#define VMALLOC_START (((_ALIGN((long)high_memory, PPC_PIN_SIZE) + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
#else
#define VMALLOC_START ((((long)high_memory + VMALLOC_OFFSET) & ~(VMALLOC_OFFSET-1)))
#endif
next reply other threads:[~2005-12-29 20:40 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-29 20:40 Marcelo Tosatti [this message]
2006-01-12 15:31 ` [PATCH] powerpc: generalize PPC44x_PIN_SIZE Matt Porter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20051229204040.GA9751@dmt.cnet \
--to=marcelo.tosatti@cyclades.com \
--cc=linuxppc-embedded@ozlabs.org \
--cc=mporter@kernel.crashing.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.