From: Dean Nelson <dcn@sgi.com>
To: linux-ia64@vger.kernel.org
Subject: Re: [PATCH] cleanup XPC disengage related messages (v2)
Date: Thu, 05 Jan 2006 18:43:56 +0000 [thread overview]
Message-ID: <20060105184356.GA11465@sgi.com> (raw)
In-Reply-To: <43AC2281.mailxDCB118CPI@aqua.americas.sgi.com>
Tony,
Please ignore the previous version of this patch, use this one instead.
Thanks,
Dean
Cleanup the XPC disengage related messages that are printed to the log.
Signed-off-by: Dean Nelson <dcn@sgi.com>
Index: linux-2.6.git-test/arch/ia64/sn/kernel/xpc_main.c
=================================--- linux-2.6.git-test.orig/arch/ia64/sn/kernel/xpc_main.c 2005-12-23 07:37:53.313511106 -0600
+++ linux-2.6.git-test/arch/ia64/sn/kernel/xpc_main.c 2006-01-05 09:50:23.885862251 -0600
@@ -162,6 +162,8 @@
};
static struct ctl_table_header *xpc_sysctl;
+/* non-zero if any remote partition disengage request was timed out */
+int xpc_disengage_request_timedout;
/* #of IRQs received */
static atomic_t xpc_act_IRQ_rcvd;
@@ -921,9 +923,9 @@
xpc_do_exit(enum xpc_retval reason)
{
partid_t partid;
- int active_part_count;
+ int active_part_count, printed_waiting_msg = 0;
struct xpc_partition *part;
- unsigned long printmsg_time;
+ unsigned long printmsg_time, disengage_request_timeout = 0;
/* a 'rmmod XPC' and a 'reboot' cannot both end up here together */
@@ -953,7 +955,8 @@
/* wait for all partitions to become inactive */
- printmsg_time = jiffies;
+ printmsg_time = jiffies + (XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ);
+ xpc_disengage_request_timedout = 0;
do {
active_part_count = 0;
@@ -969,20 +972,39 @@
active_part_count++;
XPC_DEACTIVATE_PARTITION(part, reason);
- }
- if (active_part_count = 0) {
- break;
+ if (part->disengage_request_timeout >
+ disengage_request_timeout) {
+ disengage_request_timeout + part->disengage_request_timeout;
+ }
}
- if (jiffies >= printmsg_time) {
- dev_info(xpc_part, "waiting for partitions to "
- "deactivate/disengage, active count=%d, remote "
- "engaged=0x%lx\n", active_part_count,
- xpc_partition_engaged(1UL << partid));
-
- printmsg_time = jiffies +
+ if (xpc_partition_engaged(-1UL)) {
+ if (jiffies >= printmsg_time) {
+ dev_info(xpc_part, "waiting for remote "
+ "partitions to disengage, timeout in "
+ "%ld seconds\n",
+ (disengage_request_timeout - jiffies)
+ / HZ);
+ printmsg_time = jiffies +
(XPC_DISENGAGE_PRINTMSG_INTERVAL * HZ);
+ printed_waiting_msg = 1;
+ }
+
+ } else if (active_part_count > 0) {
+ if (printed_waiting_msg) {
+ dev_info(xpc_part, "waiting for local partition"
+ " to disengage\n");
+ printed_waiting_msg = 0;
+ }
+
+ } else {
+ if (!(volatile int) xpc_disengage_request_timedout) {
+ dev_info(xpc_part, "all partitions have "
+ "disengaged\n");
+ }
+ break;
}
/* sleep for a 1/3 of a second or so */
@@ -1028,7 +1050,7 @@
struct xpc_partition *part;
partid_t partid;
unsigned long engaged;
- long time, print_time, disengage_request_timeout;
+ long time, printmsg_time, disengage_request_timeout;
/* keep xpc_hb_checker thread from doing anything (just in case) */
@@ -1055,24 +1077,43 @@
}
}
- print_time = rtc_time();
- disengage_request_timeout = print_time +
+ time = rtc_time();
+ printmsg_time = time +
+ (XPC_DISENGAGE_PRINTMSG_INTERVAL * sn_rtc_cycles_per_second);
+ disengage_request_timeout = time +
(xpc_disengage_request_timelimit * sn_rtc_cycles_per_second);
/* wait for all other partitions to disengage from us */
- while ((engaged = xpc_partition_engaged(-1UL)) &&
- (time = rtc_time()) < disengage_request_timeout) {
+ while (1) {
+ engaged = xpc_partition_engaged(-1UL);
+ if (!engaged) {
+ dev_info(xpc_part, "all partitions have disengaged\n");
+ break;
+ }
- if (time >= print_time) {
+ time = rtc_time();
+ if (time >= disengage_request_timeout) {
+ for (partid = 1; partid < XP_MAX_PARTITIONS; partid++) {
+ if (engaged & (1UL << partid)) {
+ dev_info(xpc_part, "disengage from "
+ "remote partition %d timed "
+ "out\n", partid);
+ }
+ }
+ break;
+ }
+
+ if (time >= printmsg_time) {
dev_info(xpc_part, "waiting for remote partitions to "
- "disengage, engaged=0x%lx\n", engaged);
- print_time = time + (XPC_DISENGAGE_PRINTMSG_INTERVAL *
+ "disengage, timeout in %ld seconds\n",
+ (disengage_request_timeout - time) /
+ sn_rtc_cycles_per_second);
+ printmsg_time = time +
+ (XPC_DISENGAGE_PRINTMSG_INTERVAL *
sn_rtc_cycles_per_second);
}
}
- dev_info(xpc_part, "finished waiting for remote partitions to "
- "disengage, engaged=0x%lx\n", engaged);
}
Index: linux-2.6.git-test/arch/ia64/sn/kernel/xpc_partition.c
=================================--- linux-2.6.git-test.orig/arch/ia64/sn/kernel/xpc_partition.c 2005-12-23 07:37:53.313511106 -0600
+++ linux-2.6.git-test/arch/ia64/sn/kernel/xpc_partition.c 2005-12-23 07:38:47.033491740 -0600
@@ -874,6 +874,9 @@
* request in a timely fashion, so assume it's dead.
*/
+ dev_info(xpc_part, "disengage from remote partition %d "
+ "timed out\n", partid);
+ xpc_disengage_request_timedout = 1;
xpc_clear_partition_engaged(1UL << partid);
disengaged = 1;
}
Index: linux-2.6.git-test/arch/ia64/sn/kernel/xpc.h
=================================--- linux-2.6.git-test.orig/arch/ia64/sn/kernel/xpc.h 2005-12-23 07:37:53.314487567 -0600
+++ linux-2.6.git-test/arch/ia64/sn/kernel/xpc.h 2005-12-23 08:35:54.575338459 -0600
@@ -663,6 +663,7 @@
extern struct device *xpc_part;
extern struct device *xpc_chan;
extern int xpc_disengage_request_timelimit;
+extern int xpc_disengage_request_timedout;
extern irqreturn_t xpc_notify_IRQ_handler(int, void *, struct pt_regs *);
extern void xpc_dropped_IPI_check(struct xpc_partition *);
extern void xpc_activate_partition(struct xpc_partition *);
next prev parent reply other threads:[~2006-01-05 18:43 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-23 16:14 [PATCH] cleanup XPC disengage related messages Dean Nelson
2006-01-05 18:43 ` Dean Nelson [this message]
2006-01-05 22:04 ` [PATCH] cleanup XPC disengage related messages (v2) Andreas Schwab
2006-01-06 15:48 ` [PATCH] cleanup XPC disengage related messages (v3) Dean Nelson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060105184356.GA11465@sgi.com \
--to=dcn@sgi.com \
--cc=linux-ia64@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.