All of lore.kernel.org
 help / color / mirror / Atom feed
From: Adrian Bunk <bunk@stusta.de>
To: linux-kernel@vger.kernel.org
Subject: [2.6 patch] spelling: s/trough/through/
Date: Fri, 6 Jan 2006 17:33:28 +0100	[thread overview]
Message-ID: <20060106163328.GO12131@stusta.de> (raw)

Signed-off-by: Adrian Bunk <bunk@stusta.de>

---

 arch/arm/mach-omap1/board-perseus2.c        |    2 +-
 drivers/cdrom/cm206.c                       |    2 +-
 drivers/net/pcmcia/xirc2ps_cs.c             |    2 +-
 drivers/parisc/led.c                        |    2 +-
 drivers/usb/serial/usb-serial.c             |    2 +-
 net/ipv4/netfilter/ip_conntrack_proto_tcp.c |    4 ++--
 net/netfilter/nf_conntrack_proto_tcp.c      |    4 ++--
 sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c      |    2 +-
 8 files changed, 10 insertions(+), 10 deletions(-)

--- linux-2.6.15-mm1-full/arch/arm/mach-omap1/board-perseus2.c.old	2006-01-06 17:00:09.000000000 +0100
+++ linux-2.6.15-mm1-full/arch/arm/mach-omap1/board-perseus2.c	2006-01-06 17:00:19.000000000 +0100
@@ -184,7 +184,7 @@
 	omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
 
 	/*
-	 * Ethernet support trough the debug board
+	 * Ethernet support through the debug board
 	 * CS1 timings setup
 	 */
 	omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
--- linux-2.6.15-mm1-full/drivers/cdrom/cm206.c.old	2006-01-06 17:00:28.000000000 +0100
+++ linux-2.6.15-mm1-full/drivers/cdrom/cm206.c	2006-01-06 17:00:34.000000000 +0100
@@ -32,7 +32,7 @@
  18 mrt 1995: 0.24 Working background read-ahead. (still problems)
  26 mrt 1995: 0.25 Multi-session ioctl added (kernel v1.2).
               Statistics implemented, though separate stats206.h.
-	      Accessible trough ioctl 0x1000 (just a number).
+	      Accessible through ioctl 0x1000 (just a number).
 	      Hard to choose between v1.2 development and 1.1.75.
 	      Bottom-half doesn't work with 1.2...
 	      0.25a: fixed... typo. Still problems...
--- linux-2.6.15-mm1-full/drivers/net/pcmcia/xirc2ps_cs.c.old	2006-01-06 17:00:42.000000000 +0100
+++ linux-2.6.15-mm1-full/drivers/net/pcmcia/xirc2ps_cs.c	2006-01-06 17:00:49.000000000 +0100
@@ -1598,7 +1598,7 @@
     switch(cmd) {
       case SIOCGMIIPHY:		/* Get the address of the PHY in use. */
 	data[0] = 0;		/* we have only this address */
-	/* fall trough */
+	/* fall through */
       case SIOCGMIIREG:		/* Read the specified MII register. */
 	data[3] = mii_rd(ioaddr, data[0] & 0x1f, data[1] & 0x1f);
 	break;
--- linux-2.6.15-mm1-full/drivers/parisc/led.c.old	2006-01-06 17:00:57.000000000 +0100
+++ linux-2.6.15-mm1-full/drivers/parisc/led.c	2006-01-06 17:01:02.000000000 +0100
@@ -347,7 +347,7 @@
    ** 
    ** led_get_net_activity()
    ** 
-   ** calculate if there was TX- or RX-troughput on the network interfaces
+   ** calculate if there was TX- or RX-throughput on the network interfaces
    ** (analog to dev_get_info() from net/core/dev.c)
    **   
  */
--- linux-2.6.15-mm1-full/drivers/usb/serial/usb-serial.c.old	2006-01-06 17:01:10.000000000 +0100
+++ linux-2.6.15-mm1-full/drivers/usb/serial/usb-serial.c	2006-01-06 17:01:16.000000000 +0100
@@ -617,7 +617,7 @@
 	const struct usb_device_id *id;
 	struct usb_serial_driver *t;
 
-	/* List trough know devices and see if the usb id matches */
+	/* List through know devices and see if the usb id matches */
 	list_for_each(p, &usb_serial_driver_list) {
 		t = list_entry(p, struct usb_serial_driver, driver_list);
 		id = get_iface_id(t, iface);
--- linux-2.6.15-mm1-full/net/ipv4/netfilter/ip_conntrack_proto_tcp.c.old	2006-01-06 17:01:46.000000000 +0100
+++ linux-2.6.15-mm1-full/net/ipv4/netfilter/ip_conntrack_proto_tcp.c	2006-01-06 17:01:56.000000000 +0100
@@ -995,7 +995,7 @@
 		        || (!test_bit(IPS_ASSURED_BIT, &conntrack->status)
 		            && conntrack->proto.tcp.last_index == TCP_ACK_SET))
 		    && ntohl(th->ack_seq) == conntrack->proto.tcp.last_end) {
-			/* RST sent to invalid SYN or ACK we had let trough
+			/* RST sent to invalid SYN or ACK we had let through
 			 * at a) and c) above:
 			 *
 			 * a) SYN was in window then
@@ -1006,7 +1006,7 @@
 			 * segments we ignored. */
 			goto in_window;
 		}
-		/* Just fall trough */
+		/* Just fall through */
 	default:
 		/* Keep compilers happy. */
 		break;
--- linux-2.6.15-mm1-full/net/netfilter/nf_conntrack_proto_tcp.c.old	2006-01-06 17:02:07.000000000 +0100
+++ linux-2.6.15-mm1-full/net/netfilter/nf_conntrack_proto_tcp.c	2006-01-06 17:02:14.000000000 +0100
@@ -988,7 +988,7 @@
 		        || (!test_bit(IPS_ASSURED_BIT, &conntrack->status)
 		            && conntrack->proto.tcp.last_index == TCP_ACK_SET))
 		    && ntohl(th->ack_seq) == conntrack->proto.tcp.last_end) {
-			/* RST sent to invalid SYN or ACK we had let trough
+			/* RST sent to invalid SYN or ACK we had let through
 			 * at a) and c) above:
 			 *
 			 * a) SYN was in window then
@@ -999,7 +999,7 @@
 			 * segments we ignored. */
 			goto in_window;
 		}
-		/* Just fall trough */
+		/* Just fall through */
 	default:
 		/* Keep compilers happy. */
 		break;
--- linux-2.6.15-mm1-full/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c.old	2006-01-06 17:02:22.000000000 +0100
+++ linux-2.6.15-mm1-full/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c	2006-01-06 17:02:33.000000000 +0100
@@ -209,7 +209,7 @@
 	case SNDRV_PCM_FORMAT_S24_3LE:
 	case SNDRV_PCM_FORMAT_S24_3BE:
 		chip->pcm_sample = 3;
-		/* fall trough */
+		/* fall through */
 	default: /* 24-bit */
 		aval = AK4117_DIF_24R;
 		chip->pcm_frame = 3;


                 reply	other threads:[~2006-01-06 16:33 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20060106163328.GO12131@stusta.de \
    --to=bunk@stusta.de \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.