From: "Grant C. Likely" <grant.likely@secretlab.ca>
To: linuxppc-embedded@ozlabs.org, mporter@kernel.crashing.org,
glikely@gmail.com
Subject: [PATCH 02/10] Make Virtex-II Pro support generic for all Virtex devices
Date: Sat, 14 Jan 2006 02:48:16 -0700 [thread overview]
Message-ID: <20060114094816.GA12726@secretlab.ca> (raw)
The PPC405 hard core is used in both the Virtex-II Pro and Virtex 4 FX
FPGAs. This patch cleans up the Virtex naming convention to reflect more
than just the Virtex-II Pro.
Rename files virtex-ii_pro.[ch] to virtex.[ch]
Rename config value VIRTEX_II_PRO to XILINX_VIRTEX
Signed-off-by: Grant C. Likely <grant.likely@secretlab.ca>
---
arch/ppc/platforms/4xx/Kconfig | 2 -
arch/ppc/platforms/4xx/Makefile | 2 -
arch/ppc/platforms/4xx/virtex-ii_pro.c | 60 -------------------
arch/ppc/platforms/4xx/virtex-ii_pro.h | 99 --------------------------------
arch/ppc/platforms/4xx/virtex.c | 60 +++++++++++++++++++
arch/ppc/platforms/4xx/virtex.h | 99 ++++++++++++++++++++++++++++++++
arch/ppc/platforms/4xx/xilinx_ml300.c | 2 -
arch/ppc/platforms/4xx/xilinx_ml300.h | 2 -
arch/ppc/syslib/Makefile | 2 -
9 files changed, 164 insertions(+), 164 deletions(-)
delete mode 100644 arch/ppc/platforms/4xx/virtex-ii_pro.c
delete mode 100644 arch/ppc/platforms/4xx/virtex-ii_pro.h
create mode 100644 arch/ppc/platforms/4xx/virtex.c
create mode 100644 arch/ppc/platforms/4xx/virtex.h
d40e4910743dd1a103de9af79528eb715e2e13df
diff --git a/arch/ppc/platforms/4xx/Kconfig b/arch/ppc/platforms/4xx/Kconfig
index d883791..73d9bef 100644
--- a/arch/ppc/platforms/4xx/Kconfig
+++ b/arch/ppc/platforms/4xx/Kconfig
@@ -208,7 +208,7 @@ config 405GPR
depends on SYCAMORE
default y
-config VIRTEX_II_PRO
+config XILINX_VIRTEX
bool
depends on XILINX_ML300
default y
diff --git a/arch/ppc/platforms/4xx/Makefile b/arch/ppc/platforms/4xx/Makefile
index c9bb611..be4163c 100644
--- a/arch/ppc/platforms/4xx/Makefile
+++ b/arch/ppc/platforms/4xx/Makefile
@@ -26,4 +26,4 @@ obj-$(CONFIG_440SP) += ibm440sp.o
obj-$(CONFIG_440SPE) += ppc440spe.o
obj-$(CONFIG_405EP) += ibm405ep.o
obj-$(CONFIG_405GPR) += ibm405gpr.o
-obj-$(CONFIG_VIRTEX_II_PRO) += virtex-ii_pro.o
+obj-$(CONFIG_XILINX_VIRTEX) += virtex.o
diff --git a/arch/ppc/platforms/4xx/virtex-ii_pro.c b/arch/ppc/platforms/4xx/virtex-ii_pro.c
deleted file mode 100644
index 097cc9d..0000000
--- a/arch/ppc/platforms/4xx/virtex-ii_pro.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * arch/ppc/platforms/4xx/virtex-ii_pro.c
- *
- * Author: MontaVista Software, Inc.
- * source@mvista.com
- *
- * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#include <linux/config.h>
-#include <linux/init.h>
-#include <asm/ocp.h>
-#include "virtex-ii_pro.h"
-
-/* Have OCP take care of the serial ports. */
-struct ocp_def core_ocp[] = {
-#ifdef XPAR_UARTNS550_0_BASEADDR
- { .vendor = OCP_VENDOR_XILINX,
- .function = OCP_FUNC_16550,
- .index = 0,
- .paddr = XPAR_UARTNS550_0_BASEADDR,
- .irq = XPAR_INTC_0_UARTNS550_0_VEC_ID,
- .pm = OCP_CPM_NA
- },
-#ifdef XPAR_UARTNS550_1_BASEADDR
- { .vendor = OCP_VENDOR_XILINX,
- .function = OCP_FUNC_16550,
- .index = 1,
- .paddr = XPAR_UARTNS550_1_BASEADDR,
- .irq = XPAR_INTC_0_UARTNS550_1_VEC_ID,
- .pm = OCP_CPM_NA
- },
-#ifdef XPAR_UARTNS550_2_BASEADDR
- { .vendor = OCP_VENDOR_XILINX,
- .function = OCP_FUNC_16550,
- .index = 2,
- .paddr = XPAR_UARTNS550_2_BASEADDR,
- .irq = XPAR_INTC_0_UARTNS550_2_VEC_ID,
- .pm = OCP_CPM_NA
- },
-#ifdef XPAR_UARTNS550_3_BASEADDR
- { .vendor = OCP_VENDOR_XILINX,
- .function = OCP_FUNC_16550,
- .index = 3,
- .paddr = XPAR_UARTNS550_3_BASEADDR,
- .irq = XPAR_INTC_0_UARTNS550_3_VEC_ID,
- .pm = OCP_CPM_NA
- },
-#ifdef XPAR_UARTNS550_4_BASEADDR
-#error Edit this file to add more devices.
-#endif /* 4 */
-#endif /* 3 */
-#endif /* 2 */
-#endif /* 1 */
-#endif /* 0 */
- { .vendor = OCP_VENDOR_INVALID
- }
-};
diff --git a/arch/ppc/platforms/4xx/virtex-ii_pro.h b/arch/ppc/platforms/4xx/virtex-ii_pro.h
deleted file mode 100644
index 026130c..0000000
--- a/arch/ppc/platforms/4xx/virtex-ii_pro.h
+++ /dev/null
@@ -1,99 +0,0 @@
-/*
- * arch/ppc/platforms/4xx/virtex-ii_pro.h
- *
- * Include file that defines the Xilinx Virtex-II Pro processor
- *
- * Author: MontaVista Software, Inc.
- * source@mvista.com
- *
- * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the
- * terms of the GNU General Public License version 2. This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-#ifdef __KERNEL__
-#ifndef __ASM_VIRTEXIIPRO_H__
-#define __ASM_VIRTEXIIPRO_H__
-
-#include <linux/config.h>
-#include <platforms/4xx/xparameters/xparameters.h>
-
-/* serial defines */
-
-#define RS_TABLE_SIZE 4 /* change this and add more devices below
- if you have more then 4 16x50 UARTs */
-
-#define BASE_BAUD (XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16)
-
-/* The serial ports in the Virtex-II Pro have each I/O byte in the
- * LSByte of a word. This means that iomem_reg_shift needs to be 2 to
- * change the byte offsets into word offsets. In addition the base
- * addresses need to have 3 added to them to get to the LSByte.
- */
-#define STD_UART_OP(num) \
- { 0, BASE_BAUD, 0, XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \
- ASYNC_BOOT_AUTOCONF, \
- .iomem_base = (u8 *)XPAR_UARTNS550_##num##_BASEADDR + 3, \
- .iomem_reg_shift = 2, \
- .io_type = SERIAL_IO_MEM},
-
-#if defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
-#define ML300_UART0 STD_UART_OP(0)
-#else
-#define ML300_UART0
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
-#define ML300_UART1 STD_UART_OP(1)
-#else
-#define ML300_UART1
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
-#define ML300_UART2 STD_UART_OP(2)
-#else
-#define ML300_UART2
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
-#define ML300_UART3 STD_UART_OP(3)
-#else
-#define ML300_UART3
-#endif
-
-#if defined(XPAR_INTC_0_UARTNS550_4_VEC_ID)
-#error Edit this file to add more devices.
-#elif defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
-#define NR_SER_PORTS 4
-#elif defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
-#define NR_SER_PORTS 3
-#elif defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
-#define NR_SER_PORTS 2
-#elif defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
-#define NR_SER_PORTS 1
-#else
-#define NR_SER_PORTS 0
-#endif
-
-#if defined(CONFIG_UART0_TTYS0)
-#define SERIAL_PORT_DFNS \
- ML300_UART0 \
- ML300_UART1 \
- ML300_UART2 \
- ML300_UART3
-#endif
-
-#if defined(CONFIG_UART0_TTYS1)
-#define SERIAL_PORT_DFNS \
- ML300_UART1 \
- ML300_UART0 \
- ML300_UART2 \
- ML300_UART3
-#endif
-
-#define DCRN_CPMFR_BASE 0
-
-#include <asm/ibm405.h>
-
-#endif /* __ASM_VIRTEXIIPRO_H__ */
-#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/virtex.c b/arch/ppc/platforms/4xx/virtex.c
new file mode 100644
index 0000000..bbb12c0
--- /dev/null
+++ b/arch/ppc/platforms/4xx/virtex.c
@@ -0,0 +1,60 @@
+/*
+ * arch/ppc/platforms/4xx/virtex.c
+ *
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ *
+ * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <asm/ocp.h>
+#include <platforms/4xx/virtex.h>
+
+/* Have OCP take care of the serial ports. */
+struct ocp_def core_ocp[] = {
+#ifdef XPAR_UARTNS550_0_BASEADDR
+ { .vendor = OCP_VENDOR_XILINX,
+ .function = OCP_FUNC_16550,
+ .index = 0,
+ .paddr = XPAR_UARTNS550_0_BASEADDR,
+ .irq = XPAR_INTC_0_UARTNS550_0_VEC_ID,
+ .pm = OCP_CPM_NA
+ },
+#ifdef XPAR_UARTNS550_1_BASEADDR
+ { .vendor = OCP_VENDOR_XILINX,
+ .function = OCP_FUNC_16550,
+ .index = 1,
+ .paddr = XPAR_UARTNS550_1_BASEADDR,
+ .irq = XPAR_INTC_0_UARTNS550_1_VEC_ID,
+ .pm = OCP_CPM_NA
+ },
+#ifdef XPAR_UARTNS550_2_BASEADDR
+ { .vendor = OCP_VENDOR_XILINX,
+ .function = OCP_FUNC_16550,
+ .index = 2,
+ .paddr = XPAR_UARTNS550_2_BASEADDR,
+ .irq = XPAR_INTC_0_UARTNS550_2_VEC_ID,
+ .pm = OCP_CPM_NA
+ },
+#ifdef XPAR_UARTNS550_3_BASEADDR
+ { .vendor = OCP_VENDOR_XILINX,
+ .function = OCP_FUNC_16550,
+ .index = 3,
+ .paddr = XPAR_UARTNS550_3_BASEADDR,
+ .irq = XPAR_INTC_0_UARTNS550_3_VEC_ID,
+ .pm = OCP_CPM_NA
+ },
+#ifdef XPAR_UARTNS550_4_BASEADDR
+#error Edit this file to add more devices.
+#endif /* 4 */
+#endif /* 3 */
+#endif /* 2 */
+#endif /* 1 */
+#endif /* 0 */
+ { .vendor = OCP_VENDOR_INVALID
+ }
+};
diff --git a/arch/ppc/platforms/4xx/virtex.h b/arch/ppc/platforms/4xx/virtex.h
new file mode 100644
index 0000000..049c767
--- /dev/null
+++ b/arch/ppc/platforms/4xx/virtex.h
@@ -0,0 +1,99 @@
+/*
+ * arch/ppc/platforms/4xx/virtex.h
+ *
+ * Include file that defines the Xilinx Virtex-II Pro processor
+ *
+ * Author: MontaVista Software, Inc.
+ * source@mvista.com
+ *
+ * 2002-2004 (c) MontaVista Software, Inc. This file is licensed under the
+ * terms of the GNU General Public License version 2. This program is licensed
+ * "as is" without any warranty of any kind, whether express or implied.
+ */
+
+#ifdef __KERNEL__
+#ifndef __ASM_VIRTEX_H__
+#define __ASM_VIRTEX_H__
+
+#include <linux/config.h>
+#include <platforms/4xx/xparameters/xparameters.h>
+
+/* serial defines */
+
+#define RS_TABLE_SIZE 4 /* change this and add more devices below
+ if you have more then 4 16x50 UARTs */
+
+#define BASE_BAUD (XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16)
+
+/* The serial ports in the Virtex-II Pro have each I/O byte in the
+ * LSByte of a word. This means that iomem_reg_shift needs to be 2 to
+ * change the byte offsets into word offsets. In addition the base
+ * addresses need to have 3 added to them to get to the LSByte.
+ */
+#define STD_UART_OP(num) \
+ { 0, BASE_BAUD, 0, XPAR_INTC_0_UARTNS550_##num##_VEC_ID, \
+ ASYNC_BOOT_AUTOCONF, \
+ .iomem_base = (u8 *)XPAR_UARTNS550_##num##_BASEADDR + 3, \
+ .iomem_reg_shift = 2, \
+ .io_type = SERIAL_IO_MEM},
+
+#if defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
+#define ML300_UART0 STD_UART_OP(0)
+#else
+#define ML300_UART0
+#endif
+
+#if defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
+#define ML300_UART1 STD_UART_OP(1)
+#else
+#define ML300_UART1
+#endif
+
+#if defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
+#define ML300_UART2 STD_UART_OP(2)
+#else
+#define ML300_UART2
+#endif
+
+#if defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
+#define ML300_UART3 STD_UART_OP(3)
+#else
+#define ML300_UART3
+#endif
+
+#if defined(XPAR_INTC_0_UARTNS550_4_VEC_ID)
+#error Edit this file to add more devices.
+#elif defined(XPAR_INTC_0_UARTNS550_3_VEC_ID)
+#define NR_SER_PORTS 4
+#elif defined(XPAR_INTC_0_UARTNS550_2_VEC_ID)
+#define NR_SER_PORTS 3
+#elif defined(XPAR_INTC_0_UARTNS550_1_VEC_ID)
+#define NR_SER_PORTS 2
+#elif defined(XPAR_INTC_0_UARTNS550_0_VEC_ID)
+#define NR_SER_PORTS 1
+#else
+#define NR_SER_PORTS 0
+#endif
+
+#if defined(CONFIG_UART0_TTYS0)
+#define SERIAL_PORT_DFNS \
+ ML300_UART0 \
+ ML300_UART1 \
+ ML300_UART2 \
+ ML300_UART3
+#endif
+
+#if defined(CONFIG_UART0_TTYS1)
+#define SERIAL_PORT_DFNS \
+ ML300_UART1 \
+ ML300_UART0 \
+ ML300_UART2 \
+ ML300_UART3
+#endif
+
+#define DCRN_CPMFR_BASE 0
+
+#include <asm/ibm405.h>
+
+#endif /* __ASM_VIRTEX_H__ */
+#endif /* __KERNEL__ */
diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.c b/arch/ppc/platforms/4xx/xilinx_ml300.c
index 0b1b77d..b0de0a2 100644
--- a/arch/ppc/platforms/4xx/xilinx_ml300.c
+++ b/arch/ppc/platforms/4xx/xilinx_ml300.c
@@ -22,7 +22,7 @@
#include <asm/machdep.h>
#include <asm/ocp.h>
-#include <platforms/4xx/virtex-ii_pro.h> /* for NR_SER_PORTS */
+#include <platforms/4xx/virtex.h> /* for NR_SER_PORTS */
/*
* As an overview of how the following functions (platform_init,
diff --git a/arch/ppc/platforms/4xx/xilinx_ml300.h b/arch/ppc/platforms/4xx/xilinx_ml300.h
index f8c5884..8993981 100644
--- a/arch/ppc/platforms/4xx/xilinx_ml300.h
+++ b/arch/ppc/platforms/4xx/xilinx_ml300.h
@@ -16,7 +16,7 @@
#define __ASM_XILINX_ML300_H__
/* ML300 has a Xilinx Virtex-II Pro processor */
-#include <platforms/4xx/virtex-ii_pro.h>
+#include <platforms/4xx/virtex.h>
#ifndef __ASSEMBLY__
diff --git a/arch/ppc/syslib/Makefile b/arch/ppc/syslib/Makefile
index 84ef030..dc75f6e 100644
--- a/arch/ppc/syslib/Makefile
+++ b/arch/ppc/syslib/Makefile
@@ -17,7 +17,7 @@ obj-$(CONFIG_440GX) += ibm440gx_common.
obj-$(CONFIG_440SP) += ibm440gx_common.o ibm440sp_common.o
obj-$(CONFIG_440SPE) += ibm440gx_common.o ibm440sp_common.o ppc440spe_pcie.o
ifeq ($(CONFIG_4xx),y)
-ifeq ($(CONFIG_VIRTEX_II_PRO),y)
+ifeq ($(CONFIG_XILINX_VIRTEX),y)
obj-$(CONFIG_40x) += xilinx_pic.o
else
ifeq ($(CONFIG_403),y)
--
1.1.2-g9e9b-dirty
next reply other threads:[~2006-01-14 10:32 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-01-14 9:48 Grant C. Likely [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-01-09 8:32 [PATCH 00/10] Xilinx Virtex-* updates grant.likely
2006-01-09 8:32 ` [PATCH 02/10] Make Virtex-II Pro support generic for all Virtex devices grant.likely
2006-01-12 17:28 ` Andrei Konovalov
2006-01-13 17:52 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060114094816.GA12726@secretlab.ca \
--to=grant.likely@secretlab.ca \
--cc=glikely@gmail.com \
--cc=linuxppc-embedded@ozlabs.org \
--cc=mporter@kernel.crashing.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.