diff for duplicates of <200601220002.44702.arvidjaar@newmail.ru> diff --git a/a/1.txt b/N1/1.txt index 4ad57f6..60993a5 100644 --- a/a/1.txt +++ b/N1/1.txt @@ -59,9 +59,9 @@ Any chance I can see it (for 1535)? > 110: 55K. > 4-3 Bus Delay Timer Setting. The base clock is set in the previous > field. This timer decides when the SMB bus is actually idle. -> 00: Base Clock ? 4. -> 01: Base Clock ? 2. -> 10: Base Clock ? 8. +> 00: Base Clock × 4. +> 01: Base Clock × 2. +> 10: Base Clock × 8. > 11: Reserved. > 2-0 Reserved. > @@ -84,7 +84,7 @@ It is exactly 0x20 as set by driver anyway. > Also you both can try to change the delay a bit, after the driver loads (or > kill the above line that sets it). > -> for andrey (1535): setpci -d 10b9:7101 f2.b( +> for andrey (1535): setpci -d 10b9:7101 f2.b=28 > (this should set it to base*8) > @@ -144,7 +144,7 @@ Subject: [PATCH] ali1535 error recovery cleanup, PCI config fix to patch for ali15x3 from Claudion Klinger, except I try to insure adapter is in sane state before command is started -Signed-off-by: Andrey Borzenkov <arvidjaar at mail.ru> +Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> - --- @@ -428,7 +428,7 @@ index 3eb4789..ae48573 100644 } - - if (ali1535_transaction(adap)) { -+ if ((result = ali1535_transaction(adap)) = -2) { ++ if ((result = ali1535_transaction(adap)) == -2) { + /* Adapter hung and was reset; retry */ + dev_err(&adap->dev, "Adapter hung, retrying after reset\n"); + result = 0; @@ -447,5 +447,6 @@ index 3eb4789..ae48573 100644 Version: GnuPG v1.4.2 (GNU/Linux) iD8DBQFD0qF0R6LMutpd94wRAqJZAKCGgz7BKIZBsZFZWy4xUdPnidt3AgCfRrA9 -3vT8vnL7YWJf2iOGBF1I9RI=ZFOW +3vT8vnL7YWJf2iOGBF1I9RI= +=ZFOW -----END PGP SIGNATURE----- diff --git a/a/content_digest b/N1/content_digest index e78e501..5f228d6 100644 --- a/a/content_digest +++ b/N1/content_digest @@ -1,9 +1,9 @@ "ref\0200601142223.35838.arvidjaar@newmail.ru\0" "ref\0200601162240.09985.arvidjaar@newmail.ru\0" "ref\043CC0D7B.4090309@sh.cvut.cz\0" - "From\0arvidjaar@newmail.ru (Andrey Borzenkov)\0" - "Subject\0[lm-sensors] 2.6.15: lm90 0-004c: Register 0x13 read failed (-1)\0" - "Date\0Sat, 21 Jan 2006 21:02:43 +0000\0" + "From\0Andrey Borzenkov <arvidjaar@newmail.ru>\0" + "Subject\0Re: [lm-sensors] 2.6.15: lm90 0-004c: Register 0x13 read failed (-1)\0" + "Date\0Sun, 22 Jan 2006 00:02:43 +0300\0" "To\0Rudolf Marek <r.marek@sh.cvut.cz>\0" "Cc\0Jean Delvare <khali@linux-fr.org>" linux-kernel@vger.kernel.org @@ -72,9 +72,9 @@ "> 110: 55K.\n" "> 4-3 Bus Delay Timer Setting. The base clock is set in the previous\n" "> field. This timer decides when the SMB bus is actually idle.\n" - "> 00: Base Clock ? 4.\n" - "> 01: Base Clock ? 2.\n" - "> 10: Base Clock ? 8.\n" + "> 00: Base Clock \303\227 4.\n" + "> 01: Base Clock \303\227 2.\n" + "> 10: Base Clock \303\227 8.\n" "> 11: Reserved.\n" "> 2-0 Reserved.\n" ">\n" @@ -97,7 +97,7 @@ "> Also you both can try to change the delay a bit, after the driver loads (or\n" "> kill the above line that sets it).\n" ">\n" - "> for andrey (1535): setpci -d 10b9:7101 f2.b(\n" + "> for andrey (1535): setpci -d 10b9:7101 f2.b=28\n" "> (this should set it to base*8)\n" ">\n" "\n" @@ -157,7 +157,7 @@ " to patch for ali15x3 from Claudion Klinger, except I try to insure\n" " adapter is in sane state before command is started\n" "\n" - "Signed-off-by: Andrey Borzenkov <arvidjaar at mail.ru>\n" + "Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru>\n" "\n" "- ---\n" "\n" @@ -441,7 +441,7 @@ " \t}\n" " \n" "- -\tif (ali1535_transaction(adap)) {\n" - "+\tif ((result = ali1535_transaction(adap)) = -2) {\n" + "+\tif ((result = ali1535_transaction(adap)) == -2) {\n" "+\t\t/* Adapter hung and was reset; retry */\n" "+\t\tdev_err(&adap->dev, \"Adapter hung, retrying after reset\\n\");\n" "+\t\tresult = 0;\n" @@ -460,7 +460,8 @@ "Version: GnuPG v1.4.2 (GNU/Linux)\n" "\n" "iD8DBQFD0qF0R6LMutpd94wRAqJZAKCGgz7BKIZBsZFZWy4xUdPnidt3AgCfRrA9\n" - "3vT8vnL7YWJf2iOGBF1I9RI=ZFOW\n" + "3vT8vnL7YWJf2iOGBF1I9RI=\n" + "=ZFOW\n" -----END PGP SIGNATURE----- -8a9f3f8b83e4acb60e5d3a4fbc5ca925dd6e7ceb0b22337353197f22c00e317a +7161eb18764ba92a1400d46d7e83e6e0cddafb3974b683543d6bce5f8883c23f
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.