From: Andrey Borzenkov <arvidjaar@mail.ru>
To: linux-kernel@vger.kernel.org
Cc: linux-input@atrey.karlin.mff.cuni.cz
Subject: 2.6.15.1: Frequent keyboard driver reset
Date: Sun, 22 Jan 2006 00:11:59 +0300 [thread overview]
Message-ID: <200601220012.05970.arvidjaar@mail.ru> (raw)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I have Ali based Toshiba notebook. In dmesg I see frequent resets like:
input: AT Translated Set 2 keyboard as /class/input/input6
input: AT Translated Set 2 keyboard as /class/input/input7
input: AT Translated Set 2 keyboard as /class/input/input8
Interesting is I checked sysfs after having seen those messages and
{pts/0}% LC_ALL=C ll /sys/class/input
total 0
drwxr-xr-x 6 root root 0 Jan 21 13:14 input1/
drwxr-xr-x 4 root root 0 Jan 21 23:54 input8/
drwxr-xr-x 2 root root 0 Jan 21 13:14 mice/
lrwxrwxrwx 1 root root 0 Jan 22 00:02 mouse0
- -> ../../class/input/input1/mouse0/
lrwxrwxrwx 1 root root 0 Jan 22 00:02 ts0 -> ../../class/input/input1/ts0/
So it appears similar to SCSI - old instance is stuck and new instance is
created.
How can I debug it further? System information:
{pts/0}% lspci
00:00.0 Host bridge: ALi Corporation M1644/M1644T Northbridge+Trident (rev 01)
00:01.0 PCI bridge: ALi Corporation PCI to AGP Controller
00:02.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
00:04.0 IDE interface: ALi Corporation M5229 IDE (rev c3)
00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link
Controller Audio Device (rev 01)
00:07.0 ISA bridge: ALi Corporation M1533 PCI to ISA Bridge [Aladdin IV]
00:08.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
00:0a.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100]
(rev 08)
00:10.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller
(rev 01)
00:11.0 CardBus bridge: Toshiba America Info Systems ToPIC100 PCI to Cardbus
Bridge with ZV Support (rev 32)
00:11.1 CardBus bridge: Toshiba America Info Systems ToPIC100 PCI to Cardbus
Bridge with ZV Support (rev 32)
00:12.0 System peripheral: Toshiba America Info Systems SD TypA Controller
(rev 03)
01:00.0 VGA compatible controller: Trident Microsystems CyberBlade XPAi1 (rev
82)
{pts/0}% cat /proc/cmdline
root=/dev/hda2 pinit hdc=ide-cd resume=/dev/hda1 vga=791
{pts/0}% cat /proc/version
Linux version 2.6.15.1-1avb (bor@cooker.home.net) (gcc version 4.0.2
(4.0.2-1mdk for Mandriva Linux release 2006.1)) #7 Sun Jan 15 12:23:33 MSK
2006
( it has one modifed driver - i2c-ali1535 and custom config, mostly to turn
off all unneeded drivers).
config and dmesg on request (not to spam with too long message); input related
stuff in dmesg:
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
pktcdvd: v0.2.0a 2004-07-14 Jens Axboe (axboe@suse.de) and petero2@telia.com
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard as /class/input/input0
...
input: ImPS/2 Generic Wheel Mouse as /class/input/input1
TIA
- -andrey
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.2 (GNU/Linux)
iD8DBQFD0qOlR6LMutpd94wRAuEIAKDDKNqzB3XUvwYetLJrdKhk8MWLcACfRET/
gKUYpFAAk/ycTo4TMLD+RoQ=
=Ea8j
-----END PGP SIGNATURE-----
next reply other threads:[~2006-01-21 21:12 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-01-21 21:11 Andrey Borzenkov [this message]
2006-01-22 5:28 ` 2.6.15.1: Frequent keyboard driver reset Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200601220012.05970.arvidjaar@mail.ru \
--to=arvidjaar@mail.ru \
--cc=linux-input@atrey.karlin.mff.cuni.cz \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.