From: Adrian Bunk <bunk@stusta.de>
To: Andrew Morton <akpm@osdl.org>
Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>,
Alan Cox <alan@lxorguk.ukuu.org.uk>,
linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org
Subject: [2.6 patch] always enable CONFIG_PDC202XX_FORCE
Date: Sun, 29 Jan 2006 00:04:56 +0100 [thread overview]
Message-ID: <20060128230456.GW3777@stusta.de> (raw)
This patch removes the CONFIG_PDC202XX_FORCE=n case.
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
This patch was already sent on:
- 22 Jan 2006
- 14 Jan 2006
drivers/ide/Kconfig | 7 -------
drivers/ide/pci/pdc202xx_new.c | 6 ------
drivers/ide/pci/pdc202xx_old.c | 15 ---------------
3 files changed, 28 deletions(-)
--- linux-2.6.15-mm4-full/drivers/ide/Kconfig.old 2006-01-14 20:43:13.000000000 +0100
+++ linux-2.6.15-mm4-full/drivers/ide/Kconfig 2006-01-14 20:43:23.000000000 +0100
@@ -673,13 +673,6 @@
config BLK_DEV_PDC202XX_NEW
tristate "PROMISE PDC202{68|69|70|71|75|76|77} support"
-# FIXME - probably wants to be one for old and for new
-config PDC202XX_FORCE
- bool "Enable controller even if disabled by BIOS"
- depends on BLK_DEV_PDC202XX_NEW
- help
- Enable the PDC202xx controller even if it has been disabled in the BIOS setup.
-
config BLK_DEV_SVWKS
tristate "ServerWorks OSB4/CSB5/CSB6 chipsets support"
help
--- linux-2.6.15-mm4-full/drivers/ide/pci/pdc202xx_new.c.old 2006-01-14 20:43:30.000000000 +0100
+++ linux-2.6.15-mm4-full/drivers/ide/pci/pdc202xx_new.c 2006-01-14 20:43:51.000000000 +0100
@@ -420,9 +420,6 @@
.init_hwif = init_hwif_pdc202new,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
},{ /* 3 */
.name = "PDC20271",
@@ -447,9 +444,6 @@
.init_hwif = init_hwif_pdc202new,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
},{ /* 6 */
.name = "PDC20277",
--- linux-2.6.15-mm4-full/drivers/ide/pci/pdc202xx_old.c.old 2006-01-14 20:44:01.000000000 +0100
+++ linux-2.6.15-mm4-full/drivers/ide/pci/pdc202xx_old.c 2006-01-14 20:44:21.000000000 +0100
@@ -786,9 +786,6 @@
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
.extra = 16,
},{ /* 1 */
@@ -799,9 +796,6 @@
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
.extra = 48,
.flags = IDEPCI_FLAG_FORCE_PDC,
@@ -813,9 +807,6 @@
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
.extra = 48,
},{ /* 3 */
@@ -826,9 +817,6 @@
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
.extra = 48,
.flags = IDEPCI_FLAG_FORCE_PDC,
@@ -840,9 +828,6 @@
.init_dma = init_dma_pdc202xx,
.channels = 2,
.autodma = AUTODMA,
-#ifndef CONFIG_PDC202XX_FORCE
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x04,0x04}},
-#endif
.bootable = OFF_BOARD,
.extra = 48,
}
next reply other threads:[~2006-01-28 23:04 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-01-28 23:04 Adrian Bunk [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-04-04 0:10 [2.6 patch] always enable CONFIG_PDC202XX_FORCE Tobias Oed
2006-01-22 17:12 Adrian Bunk
2006-03-27 14:25 ` Sergei Shtylylov
2006-03-27 14:40 ` Bartlomiej Zolnierkiewicz
2006-01-14 15:21 [2.6 patch] Fix PDC202XX_FORCE kconfig selection Adrian Bunk
2006-01-14 16:13 ` Alan Cox
2006-01-14 17:47 ` Bartlomiej Zolnierkiewicz
2006-01-14 19:55 ` [2.6 patch] always enable CONFIG_PDC202XX_FORCE Adrian Bunk
2006-01-15 1:07 ` Alan Cox
2006-01-15 1:50 ` Adrian Bunk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060128230456.GW3777@stusta.de \
--to=bunk@stusta.de \
--cc=akpm@osdl.org \
--cc=alan@lxorguk.ukuu.org.uk \
--cc=bzolnier@gmail.com \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.