From: Nigel Cunningham <nigel@suspend2.net>
To: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>, linux-kernel@vger.kernel.org
Subject: Re: [ 00/23] [Suspend2] Freezer Upgrade Patches
Date: Mon, 30 Jan 2006 15:54:49 +1000 [thread overview]
Message-ID: <200601301554.54710.nigel@suspend2.net> (raw)
In-Reply-To: <20060127232251.GC1617@elf.ucw.cz>
[-- Attachment #1: Type: text/plain, Size: 16848 bytes --]
Hi.
On Saturday 28 January 2006 09:22, Pavel Machek wrote:
> You could swapoff -a to make your cycle a lot faster.... Freezing is
> still done in that case, IIRC.
That was right. I just did the test:
I used
stress -d 5 --hdd-bytes 100M -i 5 -c 5
to test.
In both cases, I:
1) booted to init S on an amd64 laptop with 1GB ram
2) for swsusp, swapoff'd /dev/hda1 and for suspend2 did echo 1 > /proc/suspend2/freezer_test
3) started stress
4) then started the attempts at suspending without restarting stress between each iteration.
I usually left a couple of seconds between each iteration to allow stress to fill buffers etc again, but
was called away once during swsusp testing, leaving a much bigger period between 2 tests.
Kernel log output follows (sorry about the long lines):
Jan 30 15:33:08 localhost kernel: [ 372.681816] Stopping tasks: ===================
Jan 30 15:33:08 localhost kernel: [ 378.714028] Restarting tasks...<6> Strange, kjournald not stopped
Jan 30 15:33:08 localhost kernel: [ 378.734593] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 378.755084] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 378.775148] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 378.794802] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 378.813947] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 387.171737] done
Jan 30 15:33:08 localhost kernel: [ 406.457958] Stopping tasks: ==========================|
Jan 30 15:33:08 localhost kernel: [ 409.527817] Freeing memory... ^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^Hdone (130644 pages freed)
Jan 30 15:33:08 localhost kernel: [ 410.276750] acpi_bus-0201 [02] bus_set_power : Device is not power manageable
Jan 30 15:33:08 localhost kernel: [ 410.690283] ACPI: PCI Interrupt 0000:00:14.0[A] -> GSI 17 (level, low) -> IRQ 169
Jan 30 15:33:08 localhost kernel: [ 410.739835] acpi_bus-0201 [02] bus_set_power : Device is not power manageable
Jan 30 15:33:08 localhost kernel: [ 410.758226] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 177
Jan 30 15:33:08 localhost kernel: [ 410.776764] pci_irq-0385 [03] pci_irq_derive : Unable to derive IRQ for device 0000:00:1f.0
Jan 30 15:33:08 localhost kernel: [ 410.795579] ACPI: PCI Interrupt 0000:00:1f.0[A]: no GSI
Jan 30 15:33:08 localhost kernel: [ 411.472572] Restarting tasks... done
Jan 30 15:33:08 localhost kernel: [ 489.731269] Stopping tasks: =======================
Jan 30 15:33:08 localhost kernel: [ 495.767731] Restarting tasks...<6> Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 495.786297] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 500.733572] done
Jan 30 15:33:08 localhost kernel: [ 548.200154] Stopping tasks: =========================
Jan 30 15:33:08 localhost kernel: [ 554.229009] Restarting tasks...<6> Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 559.584968] done
Jan 30 15:33:08 localhost kernel: [ 772.953163] Stopping tasks: ==========================|
Jan 30 15:33:08 localhost kernel: [ 774.268679] Freeing memory... ^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^Hdone (157371 pages freed)
Jan 30 15:33:08 localhost kernel: [ 774.948384] acpi_bus-0201 [02] bus_set_power : Device is not power manageable
Jan 30 15:33:08 localhost kernel: [ 775.352905] ACPI: PCI Interrupt 0000:00:14.0[A] -> GSI 17 (level, low) -> IRQ 169
Jan 30 15:33:08 localhost kernel: [ 775.402457] acpi_bus-0201 [02] bus_set_power : Device is not power manageable
Jan 30 15:33:08 localhost kernel: [ 775.421503] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 177
Jan 30 15:33:08 localhost kernel: [ 775.441055] pci_irq-0385 [03] pci_irq_derive : Unable to derive IRQ for device 0000:00:1f.0
Jan 30 15:33:08 localhost kernel: [ 775.461109] ACPI: PCI Interrupt 0000:00:1f.0[A]: no GSI
Jan 30 15:33:08 localhost kernel: [ 776.140128] Restarting tasks... done
Jan 30 15:33:08 localhost kernel: [ 793.729930] Stopping tasks: ================
Jan 30 15:33:08 localhost kernel: [ 799.765453] Restarting tasks...<6> Strange, kjournald not stopped
Jan 30 15:33:08 localhost kernJan 30 15:33:08 localhost kernel: [ 825.247334] Stopping tasks: =============================|
Jan 30 15:33:08 localhost kernel: [ 825.279168] Freeing memory... ^H-^H\^H|^Hdone (23358 pages freed)
Jan 30 15:33:08 localhost kernel: [ 826.844573] acpi_bus-0201 [02] bus_set_power : Device is not power manageable
Jan 30 15:33:08 localhost kernel: [ 827.409905] ACPI: PCI Interrupt 0000:00:14.0[A] -> GSI 17 (level, low) -> IRQ 169
Jan 30 15:33:08 localhost kernel: [ 827.459457] acpi_bus-0201 [02] bus_set_power : Device is not power manageable
Jan 30 15:33:08 localhost kernel: [ 827.476078] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 177
Jan 30 15:33:08 localhost kernel: [ 827.492796] pci_irq-0385 [03] pci_irq_derive : Unable to derive IRQ for device 0000:00:1f.0
Jan 30 15:33:08 localhost kernel: [ 827.509962] ACPI: PCI Interrupt 0000:00:1f.0[A]: no GSI
Jan 30 15:33:08 localhost kernel: [ 828.182831] Restarting tasks... done
Jan 30 15:33:08 localhost kernel: [ 870.265642] Stopping tasks: ================
Jan 30 15:33:08 localhost kernel: [ 876.299090] Restarting tasks...<6> Strange, kjournald not stopped
Jan 30 15:33:08 localhost kernel: [ 876.316040] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 876.332588] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 876.348638] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 876.364182] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 876.379489] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 876.394073] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 876.408172] Strange, pdflush not stopped
Jan 30 15:33:08 localhost kernel: [ 876.422010] Strange, pdflush not stopped
Jan 30 15:33:08 localhost kernel: [ 876.435853] Strange, pdflush not stopped
Jan 30 15:33:08 localhost kernel: [ 876.449156] Strange, pdflush not stopped
Jan 30 15:33:08 localhost kernel: [ 876.462449] Strange, pdflush not stopped
Jan 30 15:33:08 localhost kernel: [ 876.475099] Strange, pdflush not stopped
Jan 30 15:33:08 localhost kernel: [ 881.427744] done
el: [ 799.785374] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 799.805440] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 799.825298] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 799.844855] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 799.863529] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 799.881792] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 799.899884] Strange, pdflush not stopped
Jan 30 15:33:08 localhost kernel: [ 799.917305] Strange, pdflush not stopped
Jan 30 15:33:08 localhost kernel: [ 799.934153] Strange, pdflush not stopped
Jan 30 15:33:08 localhost kernel: [ 799.950444] Strange, pdflush not stopped
Jan 30 15:33:08 localhost kernel: [ 805.247267] done
Jan 30 15:33:08 localhost kernel: [ 825.247334] Stopping tasks: =============================|
Jan 30 15:33:08 localhost kernel: [ 825.279168] Freeing memory... ^H-^H\^H|^Hdone (23358 pages freed)
Jan 30 15:33:08 localhost kernel: [ 826.844573] acpi_bus-0201 [02] bus_set_power : Device is not power manageable
Jan 30 15:33:08 localhost kernel: [ 827.409905] ACPI: PCI Interrupt 0000:00:14.0[A] -> GSI 17 (level, low) -> IRQ 169
Jan 30 15:33:08 localhost kernel: [ 827.459457] acpi_bus-0201 [02] bus_set_power : Device is not power manageable
Jan 30 15:33:08 localhost kernel: [ 827.476078] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 177
Jan 30 15:33:08 localhost kernel: [ 827.492796] pci_irq-0385 [03] pci_irq_derive : Unable to derive IRQ for device 0000:00:1f.0
Jan 30 15:33:08 localhost kernel: [ 827.509962] ACPI: PCI Interrupt 0000:00:1f.0[A]: no GSI
Jan 30 15:33:08 localhost kernel: [ 828.182831] Restarting tasks... done
Jan 30 15:33:08 localhost kernel: [ 870.265642] Stopping tasks: ================
Jan 30 15:33:08 localhost kernel: [ 876.299090] Restarting tasks...<6> Strange, kjournald not stopped
Jan 30 15:33:08 localhost kernel: [ 876.316040] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 876.332588] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 876.348638] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 876.364182] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 876.379489] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 876.394073] Strange, stress not stopped
Jan 30 15:33:08 localhost kernel: [ 876.408172] Strange, pdflush not stopped
Jan 30 15:33:08 localhost kernel: [ 876.422010] Strange, pdflush not stopped
Jan 30 15:33:08 localhost kernel: [ 876.435853] Strange, pdflush not stopped
Jan 30 15:33:08 localhost kernel: [ 876.449156] Strange, pdflush not stopped
Jan 30 15:33:08 localhost kernel: [ 876.462449] Strange, pdflush not stopped
Jan 30 15:33:08 localhost kernel: [ 876.475099] Strange, pdflush not stopped
Jan 30 15:33:08 localhost kernel: [ 881.427744] done
Then with the new version:
[ 86.975030] Suspend2 2.2.0.1: Initiating a software suspend cycle.
[ 86.975035] suspend_userui: program not configured. suspend_userui disabled.
[ 86.975223] Freezing processes
[ 101.101759] Preparing Image.
[ 101.960220] Suspend2 debugging info:
[ 101.960223] - SUSPEND core : 2.2.0.1
[ 101.960224] - Kernel Version : 2.6.15
[ 101.960225] - Compiler vers. : 4.0
[ 101.960227] - Attempt number : 1
[ 101.960228] - Parameters : 0 128 0 0 0 0
[ 101.960229] - Overall expected compression percentage: 0.
[ 101.960231] - Swapwriter active.
[ 101.960232] Swap available for image: 295184 pages.
[ 101.960234] - Filewriter inactive.
[ 101.960235] - No I/O speed stats available.
[ 113.041463] Suspend2 2.2.0.1: Initiating a software suspend cycle.
[ 113.041470] suspend_userui: program not configured. suspend_userui disabled.
[ 113.041557] Freezing processes
[ 131.156259] Preparing Image.
[ 132.038683] Suspend2 debugging info:
[ 132.038685] - SUSPEND core : 2.2.0.1
[ 132.038687] - Kernel Version : 2.6.15
[ 132.038688] - Compiler vers. : 4.0
[ 132.038689] - Attempt number : 2
[ 132.038690] - Parameters : 0 128 0 0 0 0
[ 132.038692] - Overall expected compression percentage: 0.
[ 132.038693] - Swapwriter active.
[ 132.038694] Swap available for image: 295184 pages.
[ 132.038696] - Filewriter inactive.
[ 132.038697] - No I/O speed stats available.
[ 145.228742] Suspend2 2.2.0.1: Initiating a software suspend cycle.
[ 145.228747] suspend_userui: program not configured. suspend_userui disabled.
[ 145.228974] Freezing processes
[ 152.404097] Preparing Image.
[ 153.366314] Suspend2 debugging info:
[ 153.366316] - SUSPEND core : 2.2.0.1
[ 153.366317] - Kernel Version : 2.6.15
[ 153.366319] - Compiler vers. : 4.0
[ 153.366320] - Attempt number : 3
[ 153.366321] - Parameters : 0 128 0 0 0 0
[ 153.366323] - Overall expected compression percentage: 0.
[ 153.366324] - Swapwriter active.
[ 153.366325] Swap available for image: 295184 pages.
[ 153.366327] - Filewriter inactive.
[ 153.366328] - No I/O speed stats available.
[ 163.088026] Suspend2 2.2.0.1: Initiating a software suspend cycle.
[ 163.088032] suspend_userui: program not configured. suspend_userui disabled.
[ 163.088217] Freezing processes
[ 179.203517] Preparing Image.
[ 180.083987] Suspend2 debugging info:
[ 180.083989] - SUSPEND core : 2.2.0.1
[ 180.083990] - Kernel Version : 2.6.15
[ 180.083992] - Compiler vers. : 4.0
[ 180.083993] - Attempt number : 4
[ 180.083994] - Parameters : 0 128 0 0 0 0
[ 180.083996] - Overall expected compression percentage: 0.
[ 180.083997] - Swapwriter active.
[ 180.083998] Swap available for image: 295184 pages.
[ 180.084000] - Filewriter inactive.
[ 180.084001] - No I/O speed stats available.
[ 190.528302] Suspend2 2.2.0.1: Initiating a software suspend cycle.
[ 190.528308] suspend_userui: program not configured. suspend_userui disabled.
[ 190.528461] Freezing processes
[ 198.554222] Preparing Image.
[ 199.473349] Suspend2 debugging info:
[ 199.473351] - SUSPEND core : 2.2.0.1
[ 199.473353] - Kernel Version : 2.6.15
[ 199.473354] - Compiler vers. : 4.0
[ 199.473355] - Attempt number : 5
[ 199.473357] - Parameters : 0 128 0 0 0 0
[ 199.473358] - Overall expected compression percentage: 0.
[ 199.473360] - Swapwriter active.
[ 199.473361] Swap available for image: 295184 pages.
[ 199.473362] - Filewriter inactive.
[ 199.473364] - No I/O speed stats available.
[ 208.377977] Suspend2 2.2.0.1: Initiating a software suspend cycle.
[ 208.377984] suspend_userui: program not configured. suspend_userui disabled.
[ 208.378079] Freezing processes
[ 227.420522] Preparing Image.
[ 228.395082] Suspend2 debugging info:
[ 228.395084] - SUSPEND core : 2.2.0.1
[ 228.395085] - Kernel Version : 2.6.15
[ 228.395087] - Compiler vers. : 4.0
[ 228.395088] - Attempt number : 6
[ 228.395089] - Parameters : 0 128 0 0 0 0
[ 228.395091] - Overall expected compression percentage: 0.
[ 228.395092] - Swapwriter active.
[ 228.395093] Swap available for image: 295184 pages.
[ 228.395095] - Filewriter inactive.
[ 228.395097] - No I/O speed stats available.
[ 238.455606] Suspend2 2.2.0.1: Initiating a software suspend cycle.
[ 238.455611] suspend_userui: program not configured. suspend_userui disabled.
[ 238.455802] Freezing processes
[ 245.563055] Preparing Image.
[ 246.461738] Suspend2 debugging info:
[ 246.461741] - SUSPEND core : 2.2.0.1
[ 246.461742] - Kernel Version : 2.6.15
[ 246.461743] - Compiler vers. : 4.0
[ 246.461745] - Attempt number : 7
[ 246.461746] - Parameters : 0 128 0 0 0 0
[ 246.461747] - Overall expected compression percentage: 0.
[ 246.461749] - Swapwriter active.
[ 246.461750] Swap available for image: 295184 pages.
[ 246.461752] - Filewriter inactive.
[ 255.808530] Suspend2 2.2.0.1: Initiating a software suspend cycle.
[ 255.808537] suspend_userui: program not configured. suspend_userui disabled.
[ 255.808785] Freezing processes
[ 275.877164] Preparing Image.
[ 276.277097] Losing some ticks... checking if CPU frequency changed.
[ 276.705838] Suspend2 debugging info:
[ 276.705841] - SUSPEND core : 2.2.0.1
[ 276.705842] - Kernel Version : 2.6.15
[ 276.705844] - Compiler vers. : 4.0
[ 276.705845] - Attempt number : 8
[ 276.705846] - Parameters : 0 128 0 0 0 0
[ 276.705848] - Overall expected compression percentage: 0.
[ 276.705849] - Swapwriter active.
[ 276.705850] Swap available for image: 295184 pages.
[ 276.705852] - Filewriter inactive.
[ 276.705853] - No I/O speed stats available.
[ 288.497553] Suspend2 2.2.0.1: Initiating a software suspend cycle.
[ 288.497559] suspend_userui: program not configured. suspend_userui disabled.
[ 288.497791] Freezing processes
[ 290.355243] Preparing Image.
[ 291.262225] Suspend2 debugging info:
[ 291.262228] - SUSPEND core : 2.2.0.1
[ 291.262229] - Kernel Version : 2.6.15
[ 291.262230] - Compiler vers. : 4.0
[ 291.262232] - Attempt number : 9
[ 291.262233] - Parameters : 0 128 0 0 0 0
[ 291.262234] - Overall expected compression percentage: 0.
[ 291.262236] - Swapwriter active.
[ 291.262237] Swap available for image: 295184 pages.
[ 291.262239] - Filewriter inactive.
[ 291.262240] - No I/O speed stats available.
[ 309.866461] Suspend2 2.2.0.1: Initiating a software suspend cycle.
[ 309.866467] suspend_userui: program not configured. suspend_userui disabled.
[ 309.866655] Freezing processes
[ 322.885993] Preparing Image.
[ 323.860115] Suspend2 debugging info:
[ 323.860118] - SUSPEND core : 2.2.0.1
[ 323.860119] - Kernel Version : 2.6.15
[ 323.860121] - Compiler vers. : 4.0
[ 323.860122] - Attempt number : 10
[ 323.860123] - Parameters : 0 128 0 0 0 0
[ 323.860125] - Overall expected compression percentage: 0.
[ 323.860126] - Swapwriter active.
[ 323.860128] Swap available for image: 295184 pages.
[ 323.860129] - Filewriter inactive.
[ 323.860130] - No I/O speed stats available.
--
See our web page for Howtos, FAQs, the Wiki and mailing list info.
http://www.suspend2.net IRC: #suspend2 on Freenode
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
next prev parent reply other threads:[~2006-01-30 5:58 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-01-26 3:45 [ 00/23] [Suspend2] Freezer Upgrade Patches Nigel Cunningham
2006-01-26 3:45 ` [ 01/23] [Suspend2] Make workqueues freezeable Nigel Cunningham
2006-01-26 23:17 ` Rafael J. Wysocki
2006-01-27 4:01 ` Nigel Cunningham
2006-01-26 3:45 ` [ 02/23] [Suspend2] Add new include/linux/freezer.h header Nigel Cunningham
2006-01-26 3:45 ` [ 03/23] [Suspend2] Allow a notifier to remove itself from the notifier list Nigel Cunningham
2006-01-26 3:45 ` [ 04/23] [Suspend2] Todo notifier for processes Nigel Cunningham
2006-01-26 3:45 ` [ 05/23] [Suspend2] Make the freezer use todo lists Nigel Cunningham
2006-01-26 3:45 ` [ 06/23] [Suspend2] Disable usermode helper invocations when the freezer is on Nigel Cunningham
2006-01-30 22:05 ` Rafael J. Wysocki
2006-01-31 3:24 ` Nigel Cunningham
2006-01-31 10:58 ` Rafael J. Wysocki
2006-01-31 23:21 ` Nigel Cunningham
2006-02-01 0:33 ` Rafael J. Wysocki
2006-01-26 3:45 ` [ 07/23] [Suspend2] Add which-to-thaw parameter to thaw_processes() calls Nigel Cunningham
2006-01-26 3:45 ` [ 08/23] [Suspend2] New freezer explanation for kernel/power/process.c Nigel Cunningham
2006-01-26 3:45 ` [ 09/23] [Suspend2] Quieten the freezer for normal operation Nigel Cunningham
2006-01-26 3:45 ` [ 10/23] [Suspend2] Add support for freezing filesystem bdevs Nigel Cunningham
2006-01-26 3:45 ` [ 11/23] [Suspend2] Modify freezeable for freezing kernel threads separately Nigel Cunningham
2006-01-26 3:45 ` [ 12/23] [Suspend2] Split freezing of threads according to whether user/kernelspace Nigel Cunningham
2006-01-26 3:45 ` [ 13/23] [Suspend2] Add support for thawing just kernel threads or all threads Nigel Cunningham
2006-01-26 3:45 ` [ 14/23] [Suspend2] Helper for counting freezeable threads of a type Nigel Cunningham
2006-01-26 3:45 ` [ 15/23] [Suspend2] Helper for counting uninterruptible " Nigel Cunningham
2006-01-30 22:18 ` Rafael J. Wysocki
2006-01-30 22:25 ` Pavel Machek
2006-01-31 0:02 ` Rafael J. Wysocki
2006-01-31 9:27 ` [RFC/RFT] finally solve "swsusp fails with mysqld" problem Pavel Machek
2006-01-31 16:17 ` Rafael J. Wysocki
2006-01-31 21:29 ` Pavel Machek
2006-01-31 22:30 ` Rafael J. Wysocki
2006-01-31 5:42 ` [ 15/23] [Suspend2] Helper for counting uninterruptible threads of a type Nigel Cunningham
2006-01-26 3:45 ` [ 16/23] [Suspend2] Helper to signal all " Nigel Cunningham
2006-01-26 3:46 ` [ 17/23] [Suspend2] Helper to prod processes that should have frozen but haven't Nigel Cunningham
2006-01-26 3:46 ` [ 18/23] [Suspend2] Helper: Did we fail to freeze all threads of a type? Nigel Cunningham
2006-01-26 3:46 ` [ 19/23] [Suspend2] Freeze all threads of a type Nigel Cunningham
2006-01-26 3:46 ` [ 20/23] [Suspend2] Modify process.c includes and export freezer state Nigel Cunningham
2006-01-26 3:46 ` [ 21/23] [Suspend2] Remove unused DEBUG undef Nigel Cunningham
2006-01-26 3:46 ` [ 22/23] [Suspend2] Modify swsusp to thaw kernel threads while eating memory Nigel Cunningham
2006-01-26 3:46 ` [ 23/23] [Suspend2] Don't scan LRU while freezer is on Nigel Cunningham
2006-01-26 11:55 ` [ 00/23] [Suspend2] Freezer Upgrade Patches Pavel Machek
2006-01-26 21:49 ` Nigel Cunningham
2006-01-26 23:10 ` Rafael J. Wysocki
2006-01-27 4:04 ` Nigel Cunningham
2006-01-27 12:18 ` Rafael J. Wysocki
2006-01-27 19:20 ` Nigel Cunningham
2006-01-27 23:22 ` Pavel Machek
2006-01-30 5:54 ` Nigel Cunningham [this message]
2006-01-30 11:50 ` Pavel Machek
2006-01-30 7:53 ` Stefan Seyfried
2006-01-30 11:53 ` Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200601301554.54710.nigel@suspend2.net \
--to=nigel@suspend2.net \
--cc=linux-kernel@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=rjw@sisk.pl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.