From: Dmitry Torokhov <dtor_core@ameritech.net>
To: Linus Torvalds <torvalds@osdl.org>
Cc: Vojtech Pavlik <vojtech@suse.cz>, linux-kernel@vger.kernel.org
Subject: [GIT PATCH 01/18] NSLU2 beeper driver
Date: Tue, 31 Jan 2006 23:55:15 -0500 [thread overview]
Message-ID: <20060201050733.395925000.dtor_core@ameritech.net> (raw)
In-Reply-To: 20060201045514.178498000.dtor_core@ameritech.net
[-- Attachment #1: nslu2-beeper.patch --]
[-- Type: text/plain, Size: 6255 bytes --]
From: Alessandro Zummo <alessandro.zummo@towertech.it>
Input: add ixp4xx beeper driver
This is a driver for beeper found in LinkSys NSLU2 boxes. It should work
on any ixp4xx based platform.
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
drivers/input/misc/Kconfig | 12 ++
drivers/input/misc/Makefile | 1
drivers/input/misc/ixp4xx-beeper.c | 183 +++++++++++++++++++++++++++++++++++++
3 files changed, 196 insertions(+)
Index: work/drivers/input/misc/Kconfig
===================================================================
--- work.orig/drivers/input/misc/Kconfig
+++ work/drivers/input/misc/Kconfig
@@ -50,6 +50,18 @@ config INPUT_WISTRON_BTNS
To compile this driver as a module, choose M here: the module will
be called wistron_btns.
+config INPUT_IXP4XX_BEEPER
+ tristate "IXP4XX Beeper support"
+ depends on ARCH_IXP4XX
+ help
+ If you say yes here, you can connect a beeper to the
+ ixp4xx gpio pins. This is used by the LinkSys NSLU2.
+
+ If unsure, say Y.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ixp4xx-beeper.
+
config INPUT_UINPUT
tristate "User level driver support"
help
Index: work/drivers/input/misc/Makefile
===================================================================
--- work.orig/drivers/input/misc/Makefile
+++ work/drivers/input/misc/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_INPUT_98SPKR) += 98spkr.o
obj-$(CONFIG_INPUT_UINPUT) += uinput.o
obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o
obj-$(CONFIG_HP_SDC_RTC) += hp_sdc_rtc.o
+obj-$(CONFIG_INPUT_IXP4XX_BEEPER) += ixp4xx-beeper.o
Index: work/drivers/input/misc/ixp4xx-beeper.c
===================================================================
--- /dev/null
+++ work/drivers/input/misc/ixp4xx-beeper.c
@@ -0,0 +1,183 @@
+/*
+ * Generic IXP4xx beeper driver
+ *
+ * Copyright (C) 2005 Tower Technologies
+ *
+ * based on nslu2-io.c
+ * Copyright (C) 2004 Karen Spearel
+ *
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ * Maintainers: http://www.nslu2-linux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <asm/hardware.h>
+
+MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
+MODULE_DESCRIPTION("ixp4xx beeper driver");
+MODULE_LICENSE("GPL");
+
+static DEFINE_SPINLOCK(beep_lock);
+
+static void ixp4xx_spkr_control(unsigned int pin, unsigned int count)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&beep_lock, flags);
+
+ if (count) {
+ gpio_line_config(pin, IXP4XX_GPIO_OUT);
+ gpio_line_set(pin, IXP4XX_GPIO_LOW);
+
+ *IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
+ } else {
+ gpio_line_config(pin, IXP4XX_GPIO_IN);
+ gpio_line_set(pin, IXP4XX_GPIO_HIGH);
+
+ *IXP4XX_OSRT2 = 0;
+ }
+
+ spin_unlock_irqrestore(&beep_lock, flags);
+}
+
+static int ixp4xx_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
+{
+ unsigned int pin = (unsigned int) dev->private;
+ unsigned int count = 0;
+
+ if (type != EV_SND)
+ return -1;
+
+ switch (code) {
+ case SND_BELL:
+ if (value)
+ value = 1000;
+ case SND_TONE:
+ break;
+ default:
+ return -1;
+ }
+
+ if (value > 20 && value < 32767)
+#ifndef FREQ
+ count = (ixp4xx_get_board_tick_rate() / (value * 4)) - 1;
+#else
+ count = (FREQ / (value * 4)) - 1;
+#endif
+
+ ixp4xx_spkr_control(pin, count);
+
+ return 0;
+}
+
+static irqreturn_t ixp4xx_spkr_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ /* clear interrupt */
+ *IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND;
+
+ /* flip the beeper output */
+ *IXP4XX_GPIO_GPOUTR ^= (1 << (unsigned int) dev_id);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit ixp4xx_spkr_probe(struct platform_device *dev)
+{
+ struct input_dev *input_dev;
+ int err;
+
+ input_dev = input_allocate_device();
+ if (!input_dev)
+ return -ENOMEM;
+
+ input_dev->private = (void *) dev->id;
+ input_dev->name = "ixp4xx beeper",
+ input_dev->phys = "ixp4xx/gpio";
+ input_dev->id.bustype = BUS_HOST;
+ input_dev->id.vendor = 0x001f;
+ input_dev->id.product = 0x0001;
+ input_dev->id.version = 0x0100;
+ input_dev->cdev.dev = &dev->dev;
+
+ input_dev->evbit[0] = BIT(EV_SND);
+ input_dev->sndbit[0] = BIT(SND_BELL) | BIT(SND_TONE);
+ input_dev->event = ixp4xx_spkr_event;
+
+ err = request_irq(IRQ_IXP4XX_TIMER2, &ixp4xx_spkr_interrupt,
+ SA_INTERRUPT | SA_TIMER, "ixp4xx-beeper", (void *) dev->id);
+ if (err)
+ goto err_free_device;
+
+ err = input_register_device(input_dev);
+ if (err)
+ goto err_free_irq;
+
+ platform_set_drvdata(dev, input_dev);
+
+ return 0;
+
+ err_free_irq:
+ free_irq(IRQ_IXP4XX_TIMER2, dev);
+ err_free_device:
+ input_free_device(input_dev);
+
+ return err;
+}
+
+static int __devexit ixp4xx_spkr_remove(struct platform_device *dev)
+{
+ struct input_dev *input_dev = platform_get_drvdata(dev);
+ unsigned int pin = (unsigned int) input_dev->private;
+
+ input_unregister_device(input_dev);
+ platform_set_drvdata(dev, NULL);
+
+ /* turn the speaker off */
+ disable_irq(IRQ_IXP4XX_TIMER2);
+ ixp4xx_spkr_control(pin, 0);
+
+ free_irq(IRQ_IXP4XX_TIMER2, dev);
+
+ return 0;
+}
+
+static void ixp4xx_spkr_shutdown(struct platform_device *dev)
+{
+ struct input_dev *input_dev = platform_get_drvdata(dev);
+ unsigned int pin = (unsigned int) input_dev->private;
+
+ /* turn off the speaker */
+ disable_irq(IRQ_IXP4XX_TIMER2);
+ ixp4xx_spkr_control(pin, 0);
+}
+
+static struct platform_driver ixp4xx_spkr_platform_driver = {
+ .driver = {
+ .name = "ixp4xx-beeper",
+ .owner = THIS_MODULE,
+ },
+ .probe = ixp4xx_spkr_probe,
+ .remove = __devexit_p(ixp4xx_spkr_remove),
+ .shutdown = ixp4xx_spkr_shutdown,
+};
+
+static int __init ixp4xx_spkr_init(void)
+{
+ return platform_driver_register(&ixp4xx_spkr_platform_driver);
+}
+
+static void __exit ixp4xx_spkr_exit(void)
+{
+ platform_driver_unregister(&ixp4xx_spkr_platform_driver);
+}
+
+module_init(ixp4xx_spkr_init);
+module_exit(ixp4xx_spkr_exit);
next prev parent reply other threads:[~2006-02-01 5:09 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-02-01 4:55 [GIT PATCH 00/18] Input updates for 2.6.16-rc1 Dmitry Torokhov
2006-02-01 4:55 ` Dmitry Torokhov [this message]
2006-02-01 4:55 ` [GIT PATCH 02/18] psmouse: set name for Genius mice Dmitry Torokhov
2006-02-01 4:55 ` [GIT PATCH 03/18] iforce: do not return ENOMEM upon successful allocation Dmitry Torokhov
2006-02-01 4:55 ` [GIT PATCH 04/18] mousedev: fix memory leak Dmitry Torokhov
2006-02-01 4:55 ` [GIT PATCH 05/18] Make needlessly global code static Dmitry Torokhov
2006-02-01 4:55 ` [GIT PATCH 06/18] grip: fix crash when accessing device Dmitry Torokhov
2006-02-01 4:55 ` [GIT PATCH 07/18] grip: handle errors from input_register_device() Dmitry Torokhov
2006-02-01 4:55 ` [GIT PATCH 08/18] db9: fix possible crash with Saturn gamepads Dmitry Torokhov
2006-02-01 4:55 ` [GIT PATCH 09/18] db9: handle errors from input_register_device() Dmitry Torokhov
2006-02-01 4:55 ` [GIT PATCH 10/18] sidewinder: fix an oops Dmitry Torokhov
2006-02-01 4:55 ` [GIT PATCH 11/18] sidewinder: handle errors from input_register_device() Dmitry Torokhov
2006-02-01 4:55 ` [GIT PATCH 12/18] gamecon: fix crash when accessing device Dmitry Torokhov
2006-02-01 4:55 ` [GIT PATCH 13/18] gamecon: handle errors from input_register_device() Dmitry Torokhov
2006-02-01 4:55 ` [GIT PATCH 14/18] turbografx: " Dmitry Torokhov
2006-02-01 4:55 ` [GIT PATCH 15/18] tmdc: " Dmitry Torokhov
2006-02-01 4:55 ` [GIT PATCH 16/18] a3d: convert to dynamic input_dev allocation Dmitry Torokhov
2006-02-01 4:55 ` [GIT PATCH 17/18] iforce - fix detection of USB devices Dmitry Torokhov
2006-02-01 4:55 ` [GIT PATCH 18/18] hiddev: fix off-by-one for num_values in uref_multi requests Dmitry Torokhov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060201050733.395925000.dtor_core@ameritech.net \
--to=dtor_core@ameritech.net \
--cc=linux-kernel@vger.kernel.org \
--cc=torvalds@osdl.org \
--cc=vojtech@suse.cz \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.