From: Nigel Cunningham <ncunningham@cyclades.com>
To: linux-kernel@vger.kernel.org, Andrew Morton <akpm@osdl.org>
Subject: [Patch] Generic AGP PM support.
Date: Tue, 7 Feb 2006 09:10:14 +1000 [thread overview]
Message-ID: <200602070910.18808.ncunningham@cyclades.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 4243 bytes --]
Hi.
This patch implements generic AGP power management support, and uses it for
the Ati and NVidia drivers. It is an update on the patch that Matthew
Garrett broke out of Suspend2 a while ago and sent to the list.
Regards,
Nigel
agp_suspend.h | 43 +++++++++++++++++++++++++++++++++++++++++++
ati-agp.c | 14 ++++++++++++++
nvidia-agp.c | 14 ++++++++++++++
3 files changed, 71 insertions(+)
diff -ruNp 3030-agp-resume-support.patch-old/drivers/char/agp/agp_suspend.h 3030-agp-resume-support.patch-new/drivers/char/agp/agp_suspend.h
--- 3030-agp-resume-support.patch-old/drivers/char/agp/agp_suspend.h 1970-01-01 10:00:00.000000000 +1000
+++ 3030-agp-resume-support.patch-new/drivers/char/agp/agp_suspend.h 2005-12-05 21:26:57.000000000 +1100
@@ -0,0 +1,43 @@
+/*
+ * Generic routines for suspending and resuming an agp bridge.
+ *
+ * Include "agp.h" first.
+ */
+
+#ifdef CONFIG_PM
+static int agp_common_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ pci_save_state(pdev);
+ pci_set_power_state(pdev, 3);
+
+ return 0;
+}
+
+static int agp_common_resume(struct pci_dev *pdev,
+ struct agp_bridge_driver * generic_bridge,
+ int reconfigure(void))
+{
+ struct agp_bridge_data *bridge = pci_get_drvdata(pdev);
+
+ /* set power state 0 and restore PCI space */
+ pci_set_power_state(pdev, 0);
+ pci_restore_state(pdev);
+
+ /* reconfigure AGP hardware again */
+ if (bridge->driver == generic_bridge)
+ return reconfigure();
+
+ return 0;
+}
+#else
+static int agp_common_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ return 0;
+}
+
+static int agp_common_resume(struct pci_dev *pdev, _something_ * bridge,
+ void *reconfigure)
+{
+ return 0;
+}
+#endif
diff -ruNp 3030-agp-resume-support.patch-old/drivers/char/agp/ati-agp.c 3030-agp-resume-support.patch-new/drivers/char/agp/ati-agp.c
--- 3030-agp-resume-support.patch-old/drivers/char/agp/ati-agp.c 2005-11-11 14:12:17.000000000 +1100
+++ 3030-agp-resume-support.patch-new/drivers/char/agp/ati-agp.c 2005-12-05 21:26:57.000000000 +1100
@@ -9,6 +9,7 @@
#include <linux/agp_backend.h>
#include <asm/agp.h>
#include "agp.h"
+#include "agp_suspend.h"
#define ATI_GART_MMBASE_ADDR 0x14
#define ATI_RS100_APSIZE 0xac
@@ -507,6 +508,17 @@ static void __devexit agp_ati_remove(str
agp_put_bridge(bridge);
}
+static int agp_ati_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ return (agp_common_suspend(pdev, state));
+}
+
+static int agp_ati_resume(struct pci_dev *pdev)
+{
+ return agp_common_resume(pdev, &ati_generic_bridge,
+ ati_configure);
+}
+
static struct pci_device_id agp_ati_pci_table[] = {
{
.class = (PCI_CLASS_BRIDGE_HOST << 8),
@@ -526,6 +538,8 @@ static struct pci_driver agp_ati_pci_dri
.id_table = agp_ati_pci_table,
.probe = agp_ati_probe,
.remove = agp_ati_remove,
+ .suspend = agp_ati_suspend,
+ .resume = agp_ati_resume,
};
static int __init agp_ati_init(void)
diff -ruNp 3030-agp-resume-support.patch-old/drivers/char/agp/nvidia-agp.c 3030-agp-resume-support.patch-new/drivers/char/agp/nvidia-agp.c
--- 3030-agp-resume-support.patch-old/drivers/char/agp/nvidia-agp.c 2005-11-11 14:12:17.000000000 +1100
+++ 3030-agp-resume-support.patch-new/drivers/char/agp/nvidia-agp.c 2005-12-05 21:26:59.000000000 +1100
@@ -12,6 +12,7 @@
#include <linux/page-flags.h>
#include <linux/mm.h>
#include "agp.h"
+#include "agp_suspend.h"
/* NVIDIA registers */
#define NVIDIA_0_APSIZE 0x80
@@ -397,11 +398,24 @@ static struct pci_device_id agp_nvidia_p
MODULE_DEVICE_TABLE(pci, agp_nvidia_pci_table);
+static int agp_nvidia_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ return (agp_common_suspend(pdev, state));
+}
+
+static int agp_nvidia_resume(struct pci_dev *pdev)
+{
+ return agp_common_resume(pdev, &agp_bridge,
+ nvidia_configure);
+}
+
static struct pci_driver agp_nvidia_pci_driver = {
.name = "agpgart-nvidia",
.id_table = agp_nvidia_pci_table,
.probe = agp_nvidia_probe,
.remove = agp_nvidia_remove,
+ .suspend = agp_nvidia_suspend,
+ .resume = agp_nvidia_resume,
};
static int __init agp_nvidia_init(void)
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
next reply other threads:[~2006-02-06 23:13 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-02-06 23:10 Nigel Cunningham [this message]
2006-02-06 23:42 ` [Patch] Generic AGP PM support Andrew Morton
2006-02-07 10:37 ` Pavel Machek
2006-02-10 3:38 ` Benjamin Herrenschmidt
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200602070910.18808.ncunningham@cyclades.com \
--to=ncunningham@cyclades.com \
--cc=akpm@osdl.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.