From: Folkert van Heusden <folkert@vanheusden.com>
To: Charles-Edouard Ruault <ce@ruault.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: [BUG] kernel 2.6.15.4: soft lockup detected on CPU#0!
Date: Tue, 14 Feb 2006 12:41:03 +0100 [thread overview]
Message-ID: <20060214114102.GC20975@vanheusden.com> (raw)
In-Reply-To: <43EF8388.10202@ruault.com>
I've got the same soft lockups, not while cdrom access but when sa-learn
runs (from spamassassin):
[189597.723886] BUG: soft lockup detected on CPU#0!
[189597.723960]
[189597.724007] Pid: 14, comm: kblockd/0
[189597.724061] EIP: 0060:[<c022dacc>] CPU: 0
[189597.724117] EIP is at ide_pio_sector+0xb2/0xdf
[189597.724169] EFLAGS: 00200206 Not tainted (2.6.15.4-pwc-ara)
[189597.724225] EAX: c2188000 EBX: ebdc5600 ECX: 00000000 EDX: 00000005
[189597.724278] ESI: f7cf1000 EDI: c03f2780 EBP: c03f2814 DS: 007b ES: 007b
[189597.724374] CR0: 8005003b CR2: 4d5591e4 CR3: 003b2000 CR4: 000006d0
[189597.724456] [<c022db2b>] ide_pio_multi+0x32/0x3b
[189597.724616] [<c022ddd3>] task_out_intr+0xc3/0xe5
[189597.724782] [<c01231de>] del_timer+0x56/0x58
[189597.725022] [<c022dd10>] task_out_intr+0x0/0xe5
[189597.725172] [<c02296df>] ide_intr+0xbe/0x139
[189597.725318] [<c013a041>] handle_IRQ_event+0x26/0x59
[189597.725461] [<c013a0f4>] __do_IRQ+0x80/0xe0
[189597.725600] [<c0104dc6>] do_IRQ+0x36/0x66
[189597.725794] [<c01034f2>] common_interrupt+0x1a/0x20
[189597.725935] [<f886b0d4>] ipt_do_table+0xac/0x315 [ip_tables]
[189597.726098] [<f88d1029>] ipt_hook+0x29/0x31 [iptable_filter]
[189597.726231] [<c0286ff1>] nf_iterate+0x69/0x83
[189597.726359] [<c028c893>] ip_local_deliver_finish+0x0/0x1cc
[189597.726568] [<c028c893>] ip_local_deliver_finish+0x0/0x1cc
[189597.726696] [<c0287068>] nf_hook_slow+0x5d/0xea
[189597.726831] [<c028c893>] ip_local_deliver_finish+0x0/0x1cc
[189597.726972] [<c028c328>] ip_local_deliver+0x220/0x250
[189597.727134] [<c028c893>] ip_local_deliver_finish+0x0/0x1cc
[189597.727298] [<c028c5ed>] ip_rcv+0x295/0x53b
[189597.727555] [<c028ca5f>] ip_rcv_finish+0x0/0x295
[189597.727757] [<c0273111>] netif_receive_skb+0x283/0x352
[189597.727930] [<c0273266>] process_backlog+0x86/0x106
[189597.728081] [<c027336e>] net_rx_action+0x88/0x160
[189597.728229] [<c011fb34>] __do_softirq+0xbc/0xce
[189597.728443] [<c011fb78>] do_softirq+0x32/0x34
[189597.728561] [<c0104dcb>] do_IRQ+0x3b/0x66
[189597.728685] [<c01034f2>] common_interrupt+0x1a/0x20
[189597.728817] [<c0228e61>] start_request+0xfc/0x201
[189597.728955] [<c0229190>] ide_do_request+0x209/0x351
[189597.729163] [<c01c072a>] as_work_handler+0x40/0x42
[189597.729296] [<c01297a6>] worker_thread+0x185/0x21a
[189597.729433] [<c01c06ea>] as_work_handler+0x0/0x42
[189597.729570] [<c011770a>] default_wake_function+0x0/0xc
[189597.729711] [<c011770a>] default_wake_function+0x0/0xc
[189597.729856] [<c0129621>] worker_thread+0x0/0x21a
[189597.730083] [<c012d2ce>] kthread+0x9c/0xa1
[189597.730239] [<c012d232>] kthread+0x0/0xa1
[189597.730419] [<c0101065>] kernel_thread_helper+0x5/0xb
On Sun, Feb 12, 2006 at 07:50:48PM +0100, Charles-Edouard Ruault wrote:
> Hi All,
> i was trying to rip a CD when the whole machine started to freeze
> periodicaly, i then looked at the logs and found the following :
>
> Feb 12 19:23:39 ruault kernel: hdc: irq timeout: status=0x80 { Busy }
> Feb 12 19:23:39 ruault kernel: ide: failed opcode was: unknown
> Feb 12 19:23:39 ruault kernel: hdd: status timeout: status=0x80 { Busy }
> Feb 12 19:23:39 ruault kernel: ide: failed opcode was: unknown
> Feb 12 19:23:39 ruault kernel: hdd: drive not ready for command
> Feb 12 19:23:39 ruault kernel: BUG: soft lockup detected on CPU#0!
> Feb 12 19:23:39 ruault kernel:
> Feb 12 19:23:39 ruault kernel: Pid: 0, comm: swapper
> Feb 12 19:23:39 ruault kernel: EIP: 0060:[<c0272b75>] CPU: 0
> Feb 12 19:23:39 ruault kernel: EIP is at ide_inb+0x5/0x10
> Feb 12 19:23:39 ruault kernel: EFLAGS: 00000216 Tainted: P
> (2.6.15.4)
> Feb 12 19:23:39 ruault kernel: EAX: 00000180 EBX: 01aefc21 ECX: cfd3beae
> EDX: 00000177
> Feb 12 19:23:39 ruault kernel: ESI: 00000088 EDI: c0419e30 EBP: c0419ec4
> DS: 007b ES: 007b
> Feb 12 19:23:39 ruault kernel: CR0: 8005003b CR2: b7274c4c CR3: 2086e000
> CR4: 000006d0
> Feb 12 19:23:39 ruault kernel: [<c0273656>] ide_wait_stat+0xf6/0x140
> Feb 12 19:23:39 ruault kernel: [<c0271cf6>] start_request+0xe6/0x2e0
> Feb 12 19:23:39 ruault kernel: [<c027220b>] ide_do_request+0x2eb/0x400
> Feb 12 19:23:39 ruault kernel: [<c0280ff0>] cdrom_newpc_intr+0x0/0x470
> Feb 12 19:23:39 ruault kernel: [<c027255c>] ide_timer_expiry+0xec/0x290
> Feb 12 19:23:39 ruault kernel: [<c0272470>] ide_timer_expiry+0x0/0x290
> Feb 12 19:23:39 ruault kernel: [<c0128afc>] run_timer_softirq+0xbc/0x210
> Feb 12 19:23:39 ruault kernel: [<c0123f12>] __do_softirq+0x52/0xa0
> Feb 12 19:23:39 ruault kernel: [<c0123f8d>] do_softirq+0x2d/0x40
> Feb 12 19:23:39 ruault kernel: [<c0124068>] irq_exit+0x38/0x40
> Feb 12 19:23:39 ruault kernel: [<c0105a77>] do_IRQ+0x37/0x70
> Feb 12 19:23:39 ruault kernel: [<c0103d4e>] common_interrupt+0x1a/0x20
> Feb 12 19:23:39 ruault kernel: [<c010105b>] default_idle+0x2b/0x60
> Feb 12 19:23:39 ruault kernel: [<c01010f5>] cpu_idle+0x45/0x80
> Feb 12 19:23:39 ruault kernel: [<c03b084f>] start_kernel+0x17f/0x1e0
> Feb 12 19:23:39 ruault kernel: [<c03b0390>] unknown_bootoption+0x0/0x1e0
> Feb 12 19:23:39 ruault kernel: hdc: status timeout: status=0x80 { Busy }
> Feb 12 19:23:39 ruault kernel: ide: failed opcode was: unknown
> Feb 12 19:23:39 ruault kernel: hdc: drive not ready for command
> Feb 12 19:23:39 ruault kernel: hdd: status timeout: status=0x80 { Busy }
> Feb 12 19:23:39 ruault kernel: ide: failed opcode was: unknown
> Feb 12 19:23:39 ruault kernel: hdd: drive not ready for command
> Feb 12 19:23:39 ruault kernel: hdd: ATAPI reset complete
> Feb 12 19:23:49 ruault kernel: hdc: irq timeout: status=0x80 { Busy }
> Feb 12 19:23:49 ruault kernel: ide: failed opcode was: unknown
> Feb 12 19:23:49 ruault kernel: hdd: status timeout: status=0x80 { Busy }
> Feb 12 19:24:09 ruault kernel: hdc: irq timeout: status=0x80 { Busy }
>
> After a few seconds, the whole machine was totally locked up and the
> only option i had was a hard reset.
> I was able to reproduce it once more.
>
> I'm running vanilla kernel 2.6.15.4 on an athlon 32 bits. here's generic
> info about my configuration :
>
> processor : 0
> vendor_id : AuthenticAMD
> cpu family : 6
> model : 8
> model name : AMD Athlon(TM) XP 2400+
> stepping : 1
> cpu MHz : 2000.448
> cache size : 256 KB
> fdiv_bug : no
> hlt_bug : no
> f00f_bug : no
> coma_bug : no
> fpu : yes
> fpu_exception : yes
> cpuid level : 1
> wp : yes
> flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
> mca cmov pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
> bogomips : 4004.40
>
> /sbin/lspci -v
> 00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP]
> Host Bridge
> Subsystem: ASUSTeK Computer Inc. A7V8X motherboard
> Flags: bus master, 66Mhz, medium devsel, latency 0
> Memory at f0000000 (32-bit, prefetchable) [size=128M]
> Capabilities: <available only to root>
>
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8235 PCI Bridge (prog-if 00
> [Normal decode])
> Flags: bus master, 66Mhz, medium devsel, latency 0
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: d6800000-d7dfffff
> Prefetchable memory behind bridge: d8000000-efffffff
> Capabilities: <available only to root>
>
> 00:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
> Controller (rev 46) (prog-if 10 [OHCI])
> Subsystem: VIA Technologies, Inc. IEEE 1394 Host Controller
> Flags: bus master, stepping, medium devsel, latency 32, IRQ 20
> Memory at d6000000 (32-bit, non-prefetchable) [size=2K]
> I/O ports at b800 [size=128]
> Capabilities: <available only to root>
>
> 00:08.0 RAID bus controller: Promise Technology, Inc. PDC20376 (FastTrak
> 376) (rev 02)
> Subsystem: ASUSTeK Computer Inc. A7V8X motherboard
> Flags: bus master, 66Mhz, medium devsel, latency 96, IRQ 10
> I/O ports at b400 [size=64]
> I/O ports at b000 [size=16]
> I/O ports at a800 [size=128]
> Memory at d5800000 (32-bit, non-prefetchable) [size=4K]
> Memory at d5000000 (32-bit, non-prefetchable) [size=128K]
> Capabilities: <available only to root>
>
> 00:09.0 Ethernet controller: Broadcom Corporation BCM4401 100Base-T (rev 01)
> Subsystem: ASUSTeK Computer Inc. A7V8X motherboard
> Flags: bus master, fast devsel, latency 32, IRQ 16
> Memory at d4800000 (32-bit, non-prefetchable) [size=8K]
> Expansion ROM at d7ff0000 [disabled] [size=16K]
> Capabilities: <available only to root>
>
> 00:0d.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro
> 100] (rev 08)
> Subsystem: Intel Corporation EtherExpress PRO/100+ Management
> Adapter
> Flags: bus master, medium devsel, latency 32, IRQ 17
> Memory at d4000000 (32-bit, non-prefetchable) [size=4K]
> I/O ports at a400 [size=64]
> Memory at d3800000 (32-bit, non-prefetchable) [size=1M]
> [virtual] Expansion ROM at 50000000 [disabled] [size=1M]
> Capabilities: <available only to root>
>
> 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 80) (prog-if 00 [UHCI])
> Subsystem: ASUSTeK Computer Inc. VT6202 USB2.0 4 port controller
> Flags: bus master, medium devsel, latency 32, IRQ 19
> I/O ports at a000 [size=32]
> Capabilities: <available only to root>
>
> 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 80) (prog-if 00 [UHCI])
> Subsystem: ASUSTeK Computer Inc. VT6202 USB2.0 4 port controller
> Flags: bus master, medium devsel, latency 32, IRQ 19
> I/O ports at 9800 [size=32]
> Capabilities: <available only to root>
>
> 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
> Controller (rev 80) (prog-if 00 [UHCI])
> Subsystem: ASUSTeK Computer Inc. VT6202 USB2.0 4 port controller
> Flags: bus master, medium devsel, latency 32, IRQ 19
> I/O ports at 9400 [size=32]
> Capabilities: <available only to root>
>
> 00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if
> 20 [EHCI])
> Subsystem: ASUSTeK Computer Inc. A7V8X motherboard
> Flags: bus master, medium devsel, latency 32, IRQ 19
> Memory at d3000000 (32-bit, non-prefetchable) [size=256]
> Capabilities: <available only to root>
>
> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
> Subsystem: ASUSTeK Computer Inc. A7V8X motherboard
> Flags: bus master, stepping, medium devsel, latency 0
> Capabilities: <available only to root>
>
> 00:11.1 IDE interface: VIA Technologies, Inc.
> VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
> (prog-if 8a [Master SecP PriP])
> Subsystem: ASUSTeK Computer Inc. A7V8X / A7V333 motherboard
> Flags: bus master, medium devsel, latency 32, IRQ 255
> I/O ports at 9000 [size=16]
> Capabilities: <available only to root>
>
> 00:11.5 Multimedia audio controller: VIA Technologies, Inc.
> VT8233/A/8235/8237 AC97 Audio Controller (rev 50)
> Subsystem: ASUSTeK Computer Inc. A7V8X Motherboard (Realtek
> ALC650 codec)
> Flags: medium devsel, IRQ 18
> I/O ports at e000 [size=256]
> Capabilities: <available only to root>
>
> 01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R300 NE
> [Radeon 9500 Pro] (prog-if 00 [VGA])
> Subsystem: ATI Technologies Inc Radeon R300 NE [Radeon 9500 Pro]
> Flags: bus master, stepping, 66Mhz, medium devsel, latency 255,
> IRQ 17
> Memory at e8000000 (32-bit, prefetchable) [size=128M]
> I/O ports at d800 [size=256]
> Memory at d7000000 (32-bit, non-prefetchable) [size=64K]
> Expansion ROM at e7fe0000 [disabled] [size=128K]
> Capabilities: <available only to root>
>
> 01:00.1 Display controller: ATI Technologies Inc Radeon R300 [Radeon
> 9500 Pro] (Secondary)
> Subsystem: ATI Technologies Inc Radeon R300 NE [Radeon 9500 Pro]
> Flags: bus master, stepping, 66Mhz, medium devsel, latency 64
> Memory at d8000000 (32-bit, prefetchable) [size=128M]
> Memory at d6800000 (32-bit, non-prefetchable) [size=64K]
> Capabilities: <available only to root>
>
> /sbin/lsmod
> Module Size Used by
> rfcomm 36504 0
> l2cap 24196 5 rfcomm
> bluetooth 44900 4 rfcomm,l2cap
> deflate 3328 0
> zlib_deflate 23576 1 deflate
> twofish 47104 0
> serpent 20224 0
> aes_i586 38272 0
> blowfish 8192 0
> des 16384 0
> lp 10696 0
> sha256 10880 0
> sha1 2816 0
> crypto_null 2560 0
> xfrm4_tunnel 3204 0
> ipcomp 7176 0
> esp4 7168 0
> ah4 5632 0
> af_key 31248 0
> autofs4 18052 1
> vmnet 35748 3
> parport_pc 38852 1
> parport 35528 2 lp,parport_pc
> vmmon 111468 0
> sunrpc 139836 1
> ipt_MARK 2432 1
> iptable_mangle 2560 1
> ipt_MASQUERADE 3072 1
> iptable_nat 6916 1
> ip_nat 17068 2 ipt_MASQUERADE,iptable_nat
> ipt_LOG 6656 1
> ipt_limit 2432 1
> ipt_mark 1664 1
> ipt_state 1920 1
> ip_conntrack 48556 4 ipt_MASQUERADE,iptable_nat,ip_nat,ipt_state
> nfnetlink 5272 2 ip_nat,ip_conntrack
> iptable_filter 2560 1
> ip_tables 21120 9
> ipt_MARK,iptable_mangle,ipt_MASQUERADE,iptable_nat,ipt_LOG,ipt_limit,ipt_mark,ipt_state,iptable_filter
> binfmt_misc 9864 1
> fglrx 454604 7
> ipv6 259840 23
> sd_mod 17296 0
> dm_mod 54072 0
> video 14468 0
> button 5264 0
> ac 3716 0
> quickcam 77348 0
> videodev 7936 1 quickcam
> usbhid 37344 0
> usb_storage 32516 0
> scsi_mod 126824 2 sd_mod,usb_storage
> ohci1394 33460 0
> ieee1394 92600 1 ohci1394
> uhci_hcd 31888 0
> ehci_hcd 33416 0
> via_agp 8320 1
> agpgart 29768 2 fglrx,via_agp
> shpchp 44224 0
> i2c_viapro 7828 0
> i2c_core 18192 1 i2c_viapro
> snd_via82xx 24468 4
> snd_ac97_codec 94112 1 snd_via82xx
> snd_ac97_bus 2176 1 snd_ac97_codec
> snd_seq_dummy 3076 0
> snd_seq_oss 34176 0
> snd_seq_midi_event 6784 1 snd_seq_oss
> snd_seq 52112 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
> snd_pcm_oss 50848 0
> snd_mixer_oss 18048 1 snd_pcm_oss
> snd_pcm 85128 5 snd_via82xx,snd_ac97_codec,snd_pcm_oss
> snd_timer 22788 3 snd_seq,snd_pcm
> snd_page_alloc 8968 2 snd_via82xx,snd_pcm
> snd_mpu401_uart 6784 1 snd_via82xx
> snd_rawmidi 22176 1 snd_mpu401_uart
> snd_seq_device 7436 4
> snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
> snd 49252 16
> snd_via82xx,snd_ac97_codec,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
> soundcore 8416 1 snd
> eepro100 27920 0
> b44 23948 0
> mii 5376 2 eepro100,b44
> floppy 60100 0
> usbcore 120836 6
> quickcam,usbhid,usb_storage,uhci_hcd,ehci_hcd
>
> relevant info regarding drives etc :
>
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> Feb 12 19:37:12 ruault kernel: VP_IDE: IDE controller at PCI slot
> 0000:00:11.1
> Feb 12 19:37:12 ruault kernel: ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
> Feb 12 19:37:12 ruault kernel: PCI: Via IRQ fixup for 0000:00:11.1, from
> 255 to 15
> Feb 12 19:37:12 ruault kernel: VP_IDE: chipset revision 6
> Feb 12 19:37:12 ruault kernel: VP_IDE: not 100% native mode: will probe
> irqs later
> Feb 12 19:37:12 ruault kernel: VP_IDE: VIA vt8235 (rev 00) IDE UDMA133
> controller on pci0000:00:11.1
> Feb 12 19:37:12 ruault kernel: ide0: BM-DMA at 0x9000-0x9007, BIOS
> settings: hda:DMA, hdb:pio
> Feb 12 19:37:12 ruault kernel: ide1: BM-DMA at 0x9008-0x900f, BIOS
> settings: hdc:DMA, hdd:DMA
> Feb 12 19:37:12 ruault kernel: hda: Maxtor 6Y080L0, ATA DISK drive
> Feb 12 19:37:12 ruault kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Feb 12 19:37:12 ruault kernel: hdc: PLEXTOR CD-R PX-W1610A, ATAPI
> CD/DVD-ROM drive
> Feb 12 19:37:12 ruault kernel: hdd: _NEC DVD_RW ND-3500AG, ATAPI
> CD/DVD-ROM drive
> Feb 12 19:37:12 ruault kernel: ide1 at 0x170-0x177,0x376 on irq 15
> Feb 12 19:37:12 ruault kernel: hda: max request size: 128KiB
> Feb 12 19:37:12 ruault kernel: hda: 160086528 sectors (81964 MB)
> w/2048KiB Cache, CHS=65535/16/63, UDMA(133)
> Feb 12 19:37:12 ruault kernel: hda: cache flushes supported
> Feb 12 19:37:12 ruault kernel: hda: hda1 hda2 hda3 hda4 < hda5 hda6
> hda7 hda8 hda9 hda10 >
> Feb 12 19:37:12 ruault kernel: hdc: ATAPI 40X CD-ROM CD-R/RW drive,
> 2048kB Cache, DMA
> Feb 12 19:37:12 ruault kernel: Uniform CD-ROM driver Revision: 3.20
> Feb 12 19:37:12 ruault kernel: hdd: ATAPI 32X DVD-ROM DVD-R CD-R/RW
> drive, 2048kB Cache, UDMA(33)
> Feb 12 19:37:12 ruault kernel: ide-floppy driver 0.99.newide
>
>
> I'm also attaching my kernel config.
>
> Let me know if you need anything else to troobleshoot the problem.
> Regards.
>
> PS: i'm not on the list so please CC me when answering !
> Thanks
>
> --
> Charles-Edouard Ruault
> PGP Key ID E4D2B80C
>
Folkert van Heusden
--
www.vanheusden.com/multitail - multitail is tail on steroids. multiple
windows, filtering, coloring, anything you can think of
----------------------------------------------------------------------
Phone: +31-6-41278122, PGP-key: 1F28D8AE, www.vanheusden.com
next prev parent reply other threads:[~2006-02-14 11:41 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-02-12 18:50 [BUG] kernel 2.6.15.4: soft lockup detected on CPU#0! Charles-Edouard Ruault
2006-02-14 11:41 ` Folkert van Heusden [this message]
2006-02-14 16:32 ` Lee Revell
2006-02-15 15:07 ` Folkert van Heusden
2006-02-15 18:19 ` Lee Revell
2006-02-16 1:38 ` Alan Cox
2006-02-17 22:56 ` Lee Revell
2006-02-16 2:51 ` Andrew Morton
2006-02-16 9:44 ` Charles-Edouard Ruault
2006-02-16 10:36 ` Folkert van Heusden
2006-02-16 10:46 ` Andrew Morton
2006-02-16 11:18 ` Charles-Edouard Ruault
2006-02-16 12:57 ` Alan Cox
2006-02-16 13:33 ` Bartlomiej Zolnierkiewicz
2006-02-16 20:20 ` Andrew Morton
2006-02-17 11:47 ` Bartlomiej Zolnierkiewicz
2006-02-17 13:08 ` [patch] timer-irq-driven soft-watchdog, cleanups Ingo Molnar
2006-02-17 14:46 ` Bartlomiej Zolnierkiewicz
2006-02-17 19:52 ` Ingo Molnar
2006-02-17 20:11 ` Ingo Molnar
2006-02-17 22:15 ` Bartlomiej Zolnierkiewicz
2006-03-13 14:48 ` Charles-Edouard Ruault
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060214114102.GC20975@vanheusden.com \
--to=folkert@vanheusden.com \
--cc=ce@ruault.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.