From: Ingo Molnar <mingo@elte.hu>
To: linux-kernel@vger.kernel.org
Cc: Ulrich Drepper <drepper@redhat.com>,
Thomas Gleixner <tglx@linutronix.de>,
Arjan van de Ven <arjan@infradead.org>,
Andrew Morton <akpm@osdl.org>
Subject: [patch 3/5] lightweight robust futexes: compat
Date: Wed, 15 Feb 2006 23:57:00 +0100 [thread overview]
Message-ID: <20060215225700.GD5599@elte.hu> (raw)
32-bit syscall compatibility support. (This patch also moves all
futex related compat functionality into kernel/futex_compat.c.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Acked-by: Ulrich Drepper <drepper@redhat.com>
----
include/linux/compat.h | 18 ++++++
include/linux/sched.h | 3 +
kernel/Makefile | 3 +
kernel/compat.c | 23 -------
kernel/exit.c | 5 +
kernel/futex_compat.c | 143 +++++++++++++++++++++++++++++++++++++++++++++++++
6 files changed, 172 insertions(+), 23 deletions(-)
Index: linux-robust-list.q/include/linux/compat.h
===================================================================
--- linux-robust-list.q.orig/include/linux/compat.h
+++ linux-robust-list.q/include/linux/compat.h
@@ -121,6 +121,24 @@ typedef struct compat_sigevent {
} _sigev_un;
} compat_sigevent_t;
+struct compat_robust_list {
+ compat_uptr_t next;
+};
+
+struct compat_robust_list_head {
+ struct compat_robust_list list;
+ compat_long_t futex_offset;
+ compat_uptr_t list_add_pending;
+};
+
+extern void compat_exit_robust_list(struct task_struct *curr);
+
+asmlinkage long
+compat_sys_set_robust_list(struct compat_robust_list_head __user *head,
+ compat_size_t len);
+asmlinkage long
+compat_sys_get_robust_list(int pid, compat_uptr_t *head_ptr,
+ compat_size_t __user *len_ptr);
long compat_sys_semctl(int first, int second, int third, void __user *uptr);
long compat_sys_msgsnd(int first, int second, int third, void __user *uptr);
Index: linux-robust-list.q/include/linux/sched.h
===================================================================
--- linux-robust-list.q.orig/include/linux/sched.h
+++ linux-robust-list.q/include/linux/sched.h
@@ -873,6 +873,9 @@ struct task_struct {
int cpuset_mems_generation;
#endif
struct robust_list_head __user *robust_list;
+#ifdef CONFIG_COMPAT
+ struct compat_robust_list_head __user *compat_robust_list;
+#endif
atomic_t fs_excl; /* holding fs exclusive resources */
struct rcu_head rcu;
Index: linux-robust-list.q/kernel/Makefile
===================================================================
--- linux-robust-list.q.orig/kernel/Makefile
+++ linux-robust-list.q/kernel/Makefile
@@ -12,6 +12,9 @@ obj-y = sched.o fork.o exec_domain.o
obj-$(CONFIG_DEBUG_MUTEXES) += mutex-debug.o
obj-$(CONFIG_FUTEX) += futex.o
+ifeq ($(CONFIG_COMPAT),y)
+obj-$(CONFIG_FUTEX) += futex_compat.o
+endif
obj-$(CONFIG_GENERIC_ISA_DMA) += dma.o
obj-$(CONFIG_SMP) += cpu.o spinlock.o
obj-$(CONFIG_DEBUG_SPINLOCK) += spinlock.o
Index: linux-robust-list.q/kernel/compat.c
===================================================================
--- linux-robust-list.q.orig/kernel/compat.c
+++ linux-robust-list.q/kernel/compat.c
@@ -17,7 +17,6 @@
#include <linux/time.h>
#include <linux/signal.h>
#include <linux/sched.h> /* for MAX_SCHEDULE_TIMEOUT */
-#include <linux/futex.h> /* for FUTEX_WAIT */
#include <linux/syscalls.h>
#include <linux/unistd.h>
#include <linux/security.h>
@@ -238,28 +237,6 @@ asmlinkage long compat_sys_sigprocmask(i
return ret;
}
-#ifdef CONFIG_FUTEX
-asmlinkage long compat_sys_futex(u32 __user *uaddr, int op, int val,
- struct compat_timespec __user *utime, u32 __user *uaddr2,
- int val3)
-{
- struct timespec t;
- unsigned long timeout = MAX_SCHEDULE_TIMEOUT;
- int val2 = 0;
-
- if ((op == FUTEX_WAIT) && utime) {
- if (get_compat_timespec(&t, utime))
- return -EFAULT;
- timeout = timespec_to_jiffies(&t) + 1;
- }
- if (op >= FUTEX_REQUEUE)
- val2 = (int) (unsigned long) utime;
-
- return do_futex((unsigned long)uaddr, op, val, timeout,
- (unsigned long)uaddr2, val2, val3);
-}
-#endif
-
asmlinkage long compat_sys_setrlimit(unsigned int resource,
struct compat_rlimit __user *rlim)
{
Index: linux-robust-list.q/kernel/exit.c
===================================================================
--- linux-robust-list.q.orig/kernel/exit.c
+++ linux-robust-list.q/kernel/exit.c
@@ -32,6 +32,7 @@
#include <linux/cn_proc.h>
#include <linux/mutex.h>
#include <linux/futex.h>
+#include <linux/compat.h>
#include <asm/uaccess.h>
#include <asm/unistd.h>
@@ -852,6 +853,10 @@ fastcall NORET_TYPE void do_exit(long co
}
if (unlikely(tsk->robust_list))
exit_robust_list(tsk);
+#ifdef CONFIG_COMPAT
+ if (unlikely(tsk->compat_robust_list))
+ compat_exit_robust_list(tsk);
+#endif
exit_mm(tsk);
exit_sem(tsk);
Index: linux-robust-list.q/kernel/futex_compat.c
===================================================================
--- /dev/null
+++ linux-robust-list.q/kernel/futex_compat.c
@@ -0,0 +1,143 @@
+/*
+ * linux/kernel/futex_compat.c
+ *
+ * Futex compatibililty routines.
+ *
+ * Copyright 2006, Red Hat, Inc., Ingo Molnar
+ */
+
+#include <linux/linkage.h>
+#include <linux/compat.h>
+#include <linux/futex.h>
+
+#include <asm/uaccess.h>
+
+/*
+ * Walk curr->robust_list (very carefully, it's a userspace list!)
+ * and mark any locks found there dead, and notify any waiters.
+ *
+ * We silently return on any sign of list-walking problem.
+ */
+void compat_exit_robust_list(struct task_struct *curr)
+{
+ struct compat_robust_list_head __user *head = curr->compat_robust_list;
+ struct robust_list __user *entry, *pending;
+ compat_uptr_t uentry, upending;
+ unsigned int limit = ROBUST_LIST_LIMIT;
+ compat_long_t futex_offset;
+
+ /*
+ * Fetch the list head (which was registered earlier, via
+ * sys_set_robust_list()):
+ */
+ if (get_user(uentry, &head->list.next))
+ return;
+ entry = compat_ptr(uentry);
+ /*
+ * Fetch the relative futex offset:
+ */
+ if (get_user(futex_offset, &head->futex_offset))
+ return;
+ /*
+ * Fetch any possibly pending lock-add first, and handle it
+ * if it exists:
+ */
+ if (get_user(upending, &head->list_add_pending))
+ return;
+ pending = compat_ptr(upending);
+ if (upending)
+ if (handle_futex_death((void *)pending + futex_offset, curr))
+ return;
+
+ while (compat_ptr(uentry) != &head->list) {
+ /*
+ * A pending lock might already be on the list, so
+ * dont process it twice:
+ */
+ if (entry != pending)
+ if (handle_futex_death((void *)entry + futex_offset,
+ curr))
+ return;
+
+ /*
+ * Fetch the next entry in the list:
+ */
+ if (get_user(uentry, (compat_uptr_t *)&entry->next))
+ return;
+ entry = compat_ptr(uentry);
+ /*
+ * Avoid excessively long or circular lists:
+ */
+ if (!--limit)
+ break;
+
+ cond_resched();
+ }
+}
+
+asmlinkage long
+compat_sys_set_robust_list(struct compat_robust_list_head __user *head,
+ compat_size_t len)
+{
+ if (unlikely(len != sizeof(*head)))
+ return -EINVAL;
+
+ current->compat_robust_list = head;
+
+ return 0;
+}
+
+asmlinkage long
+compat_sys_get_robust_list(int pid, compat_uptr_t *head_ptr,
+ compat_size_t __user *len_ptr)
+{
+ struct compat_robust_list_head *head;
+ unsigned long ret;
+
+ if (!pid)
+ head = current->compat_robust_list;
+ else {
+ struct task_struct *p;
+
+ ret = -ESRCH;
+ read_lock(&tasklist_lock);
+ p = find_task_by_pid(pid);
+ if (!p)
+ goto err_unlock;
+ ret = -EPERM;
+ if ((current->euid != p->euid) && (current->euid != p->uid) &&
+ !capable(CAP_SYS_PTRACE))
+ goto err_unlock;
+ head = p->compat_robust_list;
+ read_unlock(&tasklist_lock);
+ }
+
+ if (put_user(sizeof(*head), len_ptr))
+ return -EFAULT;
+ return put_user(ptr_to_compat(head), head_ptr);
+
+err_unlock:
+ read_unlock(&tasklist_lock);
+
+ return ret;
+}
+
+asmlinkage long compat_sys_futex(u32 __user *uaddr, int op, int val,
+ struct compat_timespec __user *utime, u32 __user *uaddr2,
+ int val3)
+{
+ struct timespec t;
+ unsigned long timeout = MAX_SCHEDULE_TIMEOUT;
+ int val2 = 0;
+
+ if ((op == FUTEX_WAIT) && utime) {
+ if (get_compat_timespec(&t, utime))
+ return -EFAULT;
+ timeout = timespec_to_jiffies(&t) + 1;
+ }
+ if (op >= FUTEX_REQUEUE)
+ val2 = (int) (unsigned long) utime;
+
+ return do_futex((unsigned long)uaddr, op, val, timeout,
+ (unsigned long)uaddr2, val2, val3);
+}
reply other threads:[~2006-02-15 22:58 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060215225700.GD5599@elte.hu \
--to=mingo@elte.hu \
--cc=akpm@osdl.org \
--cc=arjan@infradead.org \
--cc=drepper@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.