From mboxrd@z Thu Jan 1 00:00:00 1970 From: pavouk@pavouk.org (Pavel Ruzicka) Date: Fri, 10 Mar 2006 23:26:07 +0000 Subject: [lm-sensors] New 2.6 kernel patch for hardware monitoring Message-Id: <200603110026.07321.pavouk@pavouk.org> List-Id: References: In-Reply-To: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org Hello, I have this board too (RS480M2-IL) and voltages are not available in a latest bios. This board probably doesn't have connected measure pins to the voltages. Temperature measuring is really good ;-) I must try it, when I return from a holiday. Best regards, Pavel Ruzicka PS. temp1 can be board temperature. > I tested the new smsc47m192 driver on my msi rs480m2 system using > 2.6.16-rc5 and here are my results. > smsc47m192-i2c-0-2d > Adapter: SMBus PIIX4 adapter at 0400 > > in0: +0.00 V (min = +0.00 V, max = +3.32 V) ALARM > in1: +0.00 V (min = +0.00 V, max = +2.99 V) ALARM > in2: +0.00 V (min = +0.00 V, max = +4.38 V) ALARM > in3: +0.00 V (min = +0.00 V, max = +6.64 V) ALARM > in5: +3.33 V (min = +0.00 V, max = +4.38 V) > in6: +0.00 V (min = +0.00 V, max = +1.99 V) ALARM > in7: +0.00 V (min = +0.00 V, max = +2.39 V) ALARM > temp1: +35.0 C (low = -128 C, high = +127 C) > temp2: +55.0 C (low = -128 C, high = +60 C) > temp3: +116.0 C (low = -128 C, high = +127 C) > vid: +1.550 V (VRM Version 2.4) > > which is fantastic! > > The rest of the measurements are a mystery to me and the 6 ALARMS seem > slightly... alarming :)