From: Parag Warudkar <kernel-stuff@comcast.net>
To: Takashi Iwai <tiwai@suse.de>
Cc: Otavio Salvador <otavio@debian.org>, Adrian Bunk <bunk@stusta.de>,
"S. Umar" <umar@compsci.cas.vanderbilt.edu>,
linux-kernel@vger.kernel.org
Subject: Re: ALSA HDA Intel stoped to work in 2.6.16-*
Date: Sun, 12 Mar 2006 03:11:09 -0500 [thread overview]
Message-ID: <200603120311.09105.kernel-stuff@comcast.net> (raw)
In-Reply-To: <s5hr75fley8.wl%tiwai@suse.de>
On Monday 06 March 2006 11:23, Takashi Iwai wrote:
> At Mon, 06 Mar 2006 13:19:30 -0300,
>
> Otavio Salvador wrote:
> > Takashi Iwai <tiwai@suse.de> writes:
> > >> Shouldn't this fix go into 2.6.16?
> > >
> > > Unfortunately it's involved with many other patches (especially
> > > semahpore->mutex ones) and hard to cherry-pick...
> >
> > I could prepare another patch just to fix it and then put it in on
> > 2.6.16.
I have a DELL E1705 Laptop and snd-intel-hda used to work for me in 2.6.15 -
it no longer works (Silence, no sound, no errors in dmesg) with 2.6.16-rc6.
I have tried to load snd_hda_intel with model=basic but even then it did not
work for me.
cat /proc/asound/cards
0 [01cd ]: HDA-Intel - HDA Intel
HDA Intel at 0xdfebc000 irq 233
cat /proc/asound/01cd/
codec#0 codec#1 id oss_mixer pcm0c/ pcm0p/ pcm1p/
paragw@penguin ~ $ cat /proc/asound/01cd/codec#0
Codec: SigmaTel STAC9200
Address: 0
Vendor Id: 0x83847690
Subsystem Id: 0x102801cd
Revision Id: 0x102201
Default PCM: rates 0x7e0, bits 0x0e, types 0x1
Default Amp-In caps: N/A
Default Amp-Out caps: ofs=0x1f, nsteps=0x1f, stepsize=0x05, mute=1
Node 0x02 [Audio Output] wcaps 0xd0401: Stereo
Power: 0x0
Node 0x03 [Audio Input] wcaps 0x1d0541: Stereo
Power: 0x0
Connection: 1
0x0a
Node 0x04 [Audio Input] wcaps 0x140311: Stereo Digital
PCM: rates 0x160, bits 0x0e, types 0x5
Connection: 1
0x08
Node 0x05 [Audio Output] wcaps 0x40211: Stereo Digital
PCM: rates 0x1e0, bits 0x0e, types 0x5
Node 0x06 [Vendor Defined Widget] wcaps 0xf30201: Stereo Digital
Node 0x07 [Audio Selector] wcaps 0x300901: Stereo
Connection: 3
0x02* 0x08 0x0a
Node 0x08 [Pin Complex] wcaps 0x430681: Stereo Digital
Pincap 0x0810024: IN
Pin Default 0x40c003fa: [N/A] SPDIF In at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x00:
Power: 0x0
Node 0x09 [Pin Complex] wcaps 0x400301: Stereo Digital
Pincap 0x0810: OUT
Pin Default 0x01441340: [Jack] SPDIF Out at Ext Rear
Conn = RCA, Color = Black
Pin-ctls: 0x40: OUT
Connection: 2
0x05* 0x0a
Node 0x0a [Audio Selector] wcaps 0x30090d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x0f, stepsize=0x05, mute=1
Amp-Out vals: [0x80 0x80]
Connection: 1
0x0c
Node 0x0b [Audio Selector] wcaps 0x300105: Stereo Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x9f 0x9f]
Connection: 1
0x07
Node 0x0c [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x04, stepsize=0x27, mute=0
Amp-Out vals: [0x00 0x00]
Connection: 5
0x10* 0x0f 0x0e 0x0d 0x12
Node 0x0d [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x083f: IN OUT HP
Pin Default 0x0421421f: [Jack] HP Out at Ext Right
Conn = 1/8, Color = Green
Pin-ctls: 0x00:
Connection: 1
0x0b
Node 0x0e [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x083f: IN OUT HP
Pin Default 0x90170310: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x00:
Connection: 1
0x0b
Node 0x0f [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x0837: IN OUT
Pin Default 0x408003fb: [N/A] Line In at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x20: IN
Connection: 1
0x0b
Node 0x10 [Pin Complex] wcaps 0x400181: Stereo
Pincap 0x081737: IN OUT
Pin Default 0x04a1102e: [Jack] Mic at Ext Right
Conn = 1/8, Color = Black
Pin-ctls: 0x20: IN
Connection: 1
0x0b
Node 0x11 [Pin Complex] wcaps 0x400104: Mono Amp-Out
Amp-Out caps: N/A
Amp-Out vals: [0x00]
Pincap 0x0810: OUT
Pin Default 0x90170311: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
Pin-ctls: 0x00:
Connection: 1
0x13
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x0820: IN
Pin Default 0x403003fc: [N/A] CD at Ext N/A
Conn = Unknown, Color = Unknown
Pin-ctls: 0x20: IN
Node 0x13 [Audio Mixer] wcaps 0x200100: Mono
Connection: 1
0x07
Node 0x14 [Beep Generator Widget] wcaps 0x70000c: Mono Amp-Out
Amp-Out caps: ofs=0x03, nsteps=0x03, stepsize=0x17, mute=1
Amp-Out vals: [0x00]
cat /proc/asound/01cd/codec#1
Codec: Generic 14f1 ID 2bfa
Address: 1
Vendor Id: 0x14f12bfa
Subsystem Id: 0x14f100c3
Revision Id: 0x90000
Parag
next prev parent reply other threads:[~2006-03-12 8:11 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-02-27 15:00 ALSA HDA Intel stoped to work in 2.6.16-* S. Umar
2006-02-27 16:00 ` Takashi Iwai
2006-03-04 14:46 ` Adrian Bunk
2006-03-06 14:14 ` Takashi Iwai
2006-03-06 16:19 ` Otavio Salvador
2006-03-06 16:23 ` Takashi Iwai
2006-03-12 8:11 ` Parag Warudkar [this message]
-- strict thread matches above, loose matches on Subject: below --
2006-02-27 15:20 S. Umar
2006-02-27 15:58 ` Takashi Iwai
2006-02-27 13:15 Otavio Salvador
2006-02-27 14:49 ` Diego Calleja
2006-02-28 8:34 ` Otavio Salvador
2006-02-27 15:02 ` Takashi Iwai
2006-02-28 8:51 ` Otavio Salvador
2006-02-28 10:54 ` Takashi Iwai
2006-02-28 20:28 ` Otavio Salvador
2006-03-01 10:29 ` Takashi Iwai
2006-03-02 2:24 ` Otavio Salvador
2006-03-03 18:11 ` Takashi Iwai
2006-03-04 5:29 ` Otavio Salvador
2006-03-04 14:51 ` Adrian Bunk
2006-03-06 14:16 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200603120311.09105.kernel-stuff@comcast.net \
--to=kernel-stuff@comcast.net \
--cc=bunk@stusta.de \
--cc=linux-kernel@vger.kernel.org \
--cc=otavio@debian.org \
--cc=tiwai@suse.de \
--cc=umar@compsci.cas.vanderbilt.edu \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.