From: Frank Pavlic <fpavlic@de.ibm.com>
To: Jeff Garzik <jgarzik@pobox.com>
Cc: linux-kernel@vger.kernel.org, netdev@vger.kernel.org
Subject: [patch 2/6] s390: qeth driver statistics fixes
Date: Wed, 22 Mar 2006 16:03:39 +0100 [thread overview]
Message-ID: <20060322160339.4e6cf34e@localhost.localdomain> (raw)
[patch 2/6] s390: qeth driver statistics fixes
From: Ursula Braun <braunu@de.ibm.com>
- display "unsigned int" values in /proc/qeth_perf with %u instead of %i
- omit qdio header length when increasing card->stats.tx_bytes
Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com>
diffstat:
qeth_main.c | 3 ++-
qeth_proc.c | 38 +++++++++++++++++++-------------------
2 files changed, 21 insertions(+), 20 deletions(-)
diff --git a/drivers/s390/net/qeth_main.c b/drivers/s390/net/qeth_main.c
index dba7f7f..634c395 100644
--- a/drivers/s390/net/qeth_main.c
+++ b/drivers/s390/net/qeth_main.c
@@ -4419,6 +4419,7 @@ qeth_send_packet(struct qeth_card *card,
int elements_needed = 0;
enum qeth_large_send_types large_send = QETH_LARGE_SEND_NO;
struct qeth_eddp_context *ctx = NULL;
+ int tx_bytes = skb->len;
int rc;
QETH_DBF_TEXT(trace, 6, "sendpkt");
@@ -4499,7 +4500,7 @@ qeth_send_packet(struct qeth_card *card,
elements_needed, ctx);
if (!rc){
card->stats.tx_packets++;
- card->stats.tx_bytes += skb->len;
+ card->stats.tx_bytes += tx_bytes;
#ifdef CONFIG_QETH_PERF_STATS
if (skb_shinfo(skb)->tso_size &&
!(large_send == QETH_LARGE_SEND_NO)) {
diff --git a/drivers/s390/net/qeth_proc.c b/drivers/s390/net/qeth_proc.c
index 3c6339d..1304641 100644
--- a/drivers/s390/net/qeth_proc.c
+++ b/drivers/s390/net/qeth_proc.c
@@ -192,27 +192,27 @@ qeth_perf_procfile_seq_show(struct seq_f
CARD_DDEV_ID(card),
QETH_CARD_IFNAME(card)
);
- seq_printf(s, " Skb's/buffers received : %li/%i\n"
- " Skb's/buffers sent : %li/%i\n\n",
+ seq_printf(s, " Skb's/buffers received : %lu/%u\n"
+ " Skb's/buffers sent : %lu/%u\n\n",
card->stats.rx_packets, card->perf_stats.bufs_rec,
card->stats.tx_packets, card->perf_stats.bufs_sent
);
- seq_printf(s, " Skb's/buffers sent without packing : %li/%i\n"
- " Skb's/buffers sent with packing : %i/%i\n\n",
+ seq_printf(s, " Skb's/buffers sent without packing : %lu/%u\n"
+ " Skb's/buffers sent with packing : %u/%u\n\n",
card->stats.tx_packets - card->perf_stats.skbs_sent_pack,
card->perf_stats.bufs_sent - card->perf_stats.bufs_sent_pack,
card->perf_stats.skbs_sent_pack,
card->perf_stats.bufs_sent_pack
);
- seq_printf(s, " Skbs sent in SG mode : %i\n"
- " Skb fragments sent in SG mode : %i\n\n",
+ seq_printf(s, " Skbs sent in SG mode : %u\n"
+ " Skb fragments sent in SG mode : %u\n\n",
card->perf_stats.sg_skbs_sent,
card->perf_stats.sg_frags_sent);
- seq_printf(s, " large_send tx (in Kbytes) : %i\n"
- " large_send count : %i\n\n",
+ seq_printf(s, " large_send tx (in Kbytes) : %u\n"
+ " large_send count : %u\n\n",
card->perf_stats.large_send_bytes >> 10,
card->perf_stats.large_send_cnt);
- seq_printf(s, " Packing state changes no pkg.->packing : %i/%i\n"
+ seq_printf(s, " Packing state changes no pkg.->packing : %u/%u\n"
" Watermarks L/H : %i/%i\n"
" Current buffer usage (outbound q's) : "
"%i/%i/%i/%i\n\n",
@@ -229,16 +229,16 @@ qeth_perf_procfile_seq_show(struct seq_f
atomic_read(&card->qdio.out_qs[3]->used_buffers)
: 0
);
- seq_printf(s, " Inbound handler time (in us) : %i\n"
- " Inbound handler count : %i\n"
- " Inbound do_QDIO time (in us) : %i\n"
- " Inbound do_QDIO count : %i\n\n"
- " Outbound handler time (in us) : %i\n"
- " Outbound handler count : %i\n\n"
- " Outbound time (in us, incl QDIO) : %i\n"
- " Outbound count : %i\n"
- " Outbound do_QDIO time (in us) : %i\n"
- " Outbound do_QDIO count : %i\n\n",
+ seq_printf(s, " Inbound handler time (in us) : %u\n"
+ " Inbound handler count : %u\n"
+ " Inbound do_QDIO time (in us) : %u\n"
+ " Inbound do_QDIO count : %u\n\n"
+ " Outbound handler time (in us) : %u\n"
+ " Outbound handler count : %u\n\n"
+ " Outbound time (in us, incl QDIO) : %u\n"
+ " Outbound count : %u\n"
+ " Outbound do_QDIO time (in us) : %u\n"
+ " Outbound do_QDIO count : %u\n\n",
card->perf_stats.inbound_time,
card->perf_stats.inbound_cnt,
card->perf_stats.inbound_do_qdio_time,
next reply other threads:[~2006-03-22 17:41 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-03-22 15:03 Frank Pavlic [this message]
2006-03-23 1:30 ` [patch 2/6] s390: qeth driver statistics fixes Jeff Garzik
2006-03-24 9:06 ` Frank Pavlic
2006-03-24 9:07 ` [RESEND patch 5/6] s390: remove tty support from ctc network device driver [1/2] Frank Pavlic
2006-03-24 9:08 ` [RESEND patch 6/6] s390: remove tty support from ctc network device driver [2/2] Frank Pavlic
-- strict thread matches above, loose matches on Subject: below --
2006-03-22 15:28 [patch 2/6] s390: qeth driver statistics fixes Frank Pavlic
2006-03-22 16:42 Frank Pavlic
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060322160339.4e6cf34e@localhost.localdomain \
--to=fpavlic@de.ibm.com \
--cc=jgarzik@pobox.com \
--cc=linux-kernel@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.