From mboxrd@z Thu Jan 1 00:00:00 1970 From: Chris Frost Subject: Re: [parisc-linux] IOGear Firewire+USB card causes unexpected irq 2 Date: Thu, 30 Mar 2006 00:02:02 -0800 Message-ID: <20060330080202.GE5336@pooh.bubble.frostnet.net> References: <20060329093444.GA5593@pooh.bubble.frostnet.net> <20060329135838.GL9011@quicksilver.road.mcmartin.ca> Mime-Version: 1.0 Content-Type: multipart/mixed; boundary="TB36FDmn/VVEgNH/" Cc: parisc-linux@lists.parisc-linux.org To: Kyle McMartin Return-Path: In-Reply-To: List-Id: parisc-linux developers list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: parisc-linux-bounces@lists.parisc-linux.org --TB36FDmn/VVEgNH/ Content-Type: text/plain; charset=us-ascii Content-Disposition: inline On Wed, Mar 29, 2006 at 08:58:38AM -0500, Kyle McMartin wrote: > lspci -vn for the card, please... Attached (pci) is the output of lspci -vvv. The vendor and device codes are immediately below. As the machine does not boot with the card in the lspci output is from a pc. 0:d.0: class 604, vendor id 3388, pci id 0021, rev 13 1:c.0: class 0c03, vendor id 1033, pci id 0035, rev 41 1:c.1: class 0c03, vendor id 1033, pci id 0035, rev 41 1:c.2: class 0c03, vendor id 1033, pci id 00e0, rev 2 1:f.0: class 0c00, vendor id 1003, pci id 00f2, rev 1 > Try commenting out > { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87560_USB) }, > { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_87415) }, > in superio.c and seeing if that helps at all. This change appears to have no effect. Max suggested checking the machine's firmware version. It was running 3.4. I upgraded the machine to the latest, 5.0, but this has no visible effect. Since 2.6.16-pa9 was released today I also upgraded to it, but with no visible change. thanks again, -- Chris Frost | -------------+---------------------------------- Public PGP Key: Email chris@frostnet.net with the subject "retrieve pgp key" or visit --TB36FDmn/VVEgNH/ Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename=pci 00:0d.0 PCI bridge: Hint Corp: Unknown device 0021 (rev 13) (prog-if 00 [Normal decode]) Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Bridge: PM- B3+ Capabilities: [90] #06 [0000] Capabilities: [a0] Vital Product Data 01:0c.0 USB Controller: NEC Corporation USB (rev 41) (prog-if 10 [OHCI]) Subsystem: Unknown device 1735:0035 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- SERR- TAbort- SERR- TAbort- SERR- TAbort- SERR-