From mboxrd@z Thu Jan  1 00:00:00 1970
From: trini@kernel.crashing.org (Tom Rini)
Date: Sat, 01 Apr 2006 18:21:55 +0000
Subject: [lm-sensors] PIIX4 and fix_hstcfg
Message-Id: <20060401182155.GR15423@smtp.west.cox.net>
List-Id: <lm-sensors.vger.kernel.org>
References: <442E9B64.50909@sh.cvut.cz>
In-Reply-To: <442E9B64.50909@sh.cvut.cz>
MIME-Version: 1.0
Content-Type: text/plain; charset="us-ascii"
Content-Transfer-Encoding: 7bit
To: lm-sensors@vger.kernel.org

On Sat, Apr 01, 2006 at 05:25:24PM +0200, Rudolf Marek wrote:

> Tom, please can you supply the lspci -v -v -v of that machine so a quirk can be developed?

Here you go:
# lspci -vvv
00:00.0 Host bridge: Intel Corporation 440LX/EX - 82443LX/EX Host bridge (rev 03)
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 64
	Region 0: Memory at e0000000 (32-bit, prefetchable) [size%6M]
	Capabilities: [a0] AGP version 1.0
		Status: RQ1 SBA+ 64bit- FW- Rate=x1,x2
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>

00:01.0 PCI bridge: Intel Corporation 440LX/EX - 82443LX/EX AGP bridge (rev 03) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Bus: primary , secondary, subordinate, sec-latencyd
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fd600000-fe6fffff
	Prefetchable memory behind bridge: db400000-dd4fffff
	BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-

00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

00:07.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01) (prog-if 80 [Master])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Region 4: I/O ports at ffa0 [disabled] [size]

00:07.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Interrupt: pin D routed to IRQ 9
	Region 4: I/O ports at ef80 [size2]

00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 01)
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin ? routed to IRQ 9

00:0b.0 Ethernet controller: Intel Corporation 82557 [Ethernet Pro 100] (rev 08)
	Subsystem: Intel Corporation EtherExpress PRO/100+ Management Adapter
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2000ns min, 14000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at febfd000 (32-bit, non-prefetchable) [size=4K]
	Region 1: I/O ports at ef00 [sized]
	Region 2: Memory at fea00000 (32-bit, non-prefetchable) [size=1M]
	Expansion ROM at fe900000 [disabled] [size=1M]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
		Status: D0 PME-Enable+ DSel=0 DScale=2 PME-

00:0c.0 Multimedia audio controller: Ensoniq ES1370 [AudioPCI]
	Subsystem: Unknown device 4942:4c4c
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (3000ns min, 32000ns max)
	Interrupt: pin A routed to IRQ 15
	Region 0: I/O ports at ee80 [sized]

00:0d.0 SCSI storage controller: Symbios Logic Inc. (formerly NCR) 53c895 (rev 01)
	Subsystem: Tekram Technology Co.,Ltd.: Unknown device 3907
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (7500ns min, 16000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at ec00 [size%6]
	Region 1: Memory at febfff00 (32-bit, non-prefetchable) [size%6]
	Region 2: Memory at febfe000 (32-bit, non-prefetchable) [size=4K]
	Expansion ROM at febe0000 [disabled] [sizedK]

00:0f.0 Unknown mass storage controller: Promise Technology, Inc. 20262 (rev 01)
	Subsystem: Promise Technology, Inc.: Unknown device 4d33
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Interrupt: pin A routed to IRQ 10
	Region 0: I/O ports at eff0 [size=8]
	Region 1: I/O ports at efe4 [size=4]
	Region 2: I/O ports at efa8 [size=8]
	Region 3: I/O ports at efe0 [size=4]
	Region 4: I/O ports at ed80 [sized]
	Region 5: Memory at febc0000 (32-bit, non-prefetchable) [size8K]
	Expansion ROM at febb0000 [disabled] [sizedK]

01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200 AGP (rev 01) (prog-if 00 [VGA])
	Subsystem: Matrox Graphics, Inc. Millennium G200 AGP
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (4000ns min, 8000ns max), cache line size 08
	Interrupt: pin A routed to IRQ 11
	Region 0: Memory at dc000000 (32-bit, prefetchable) [sizeM]
	Region 1: Memory at fe6fc000 (32-bit, non-prefetchable) [sizeK]
	Region 2: Memory at fd800000 (32-bit, non-prefetchable) [size=8M]
	Expansion ROM at fe6e0000 [disabled] [sizedK]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [f0] AGP version 1.0
		Status: RQ1 SBA+ 64bit- FW- Rate=x1,x2
		Command: RQ=0 SBA- AGP- 64bit- FW- Rate=<none>


> If you dont have the machine anymore I think we can drop that option anyway because I googled hard and it seemed nobody else had
> similar problems.

Note that I just use this as a crashbox now so if it's more trouble than
it's worth, I wouldn't mind it being dropped.

-- 
Tom Rini
http://gate.crashing.org/~trini/


