All of lore.kernel.org
 help / color / mirror / Atom feed
From: Denis Vlasenko <vda@ilport.com.ua>
To: akpm@osdl.org, linux-scsi@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Arjan van de Ven <arjan@infradead.org>,
	Hannes Reinecke <hare@suse.de>,
	"Justin T. Gibbs" <gibbs@scsiguy.com>
Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>,
	Stefan Richter <stefanr@s5r6.in-berlin.de>
Subject: [PATCH] cleanup after deinlining patch 1/2
Date: Tue, 11 Apr 2006 10:04:40 +0300	[thread overview]
Message-ID: <200604111004.40339.vda@ilport.com.ua> (raw)

[-- Attachment #1: Type: text/plain, Size: 778 bytes --]

Hi Andrew,

This patch addresses concerns raised by CCed people
regarding my previous patch which you added to mm yesterday.

On Monday 10 April 2006 17:22, Justin T. Gibbs wrote:
> I stopped being the maintainer of these driver (for Linux at least)
> almost 2 years ago.  So don't bother waiting for my approval to
> make changes here.

In light of this I did the following:

* moved inlines into aic79xx_core.c and aic7xxx_core.c
* fixed bug in ahd_delay (made it a trivial wrapper around udelay)
* fixed bug in aic7xxx_pci.c (wrong order of parameters
  in ahc_pci_write_config calls)
* marked a few functions static
* spelling fix in error message

Patch which does s/__inline/inline/g will follow in a few minutes.

Signed-off-by: Denis Vlasenko <vda@ilport.com.ua>
--
vda

[-- Attachment #2: 2.6.16-mm.aic1.patch --]
[-- Type: text/x-diff, Size: 64474 bytes --]

diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx.h linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx.h
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx.h	Mon Mar 20 07:53:29 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx.h	Tue Apr 11 09:46:49 2006
@@ -1400,7 +1400,6 @@ int			 ahd_read_flexport(struct ahd_soft
 int			 ahd_wait_flexport(struct ahd_softc *ahd);
 
 /*************************** Interrupt Services *******************************/
-void			ahd_pci_intr(struct ahd_softc *ahd);
 void			ahd_clear_intstat(struct ahd_softc *ahd);
 void			ahd_flush_qoutfifo(struct ahd_softc *ahd);
 void			ahd_run_qoutfifo(struct ahd_softc *ahd);
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_core.c linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_core.c
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_core.c	Tue Apr 11 09:44:03 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_core.c	Tue Apr 11 09:46:49 2006
@@ -50,9 +50,601 @@
 #include <dev/aic7xxx/aicasm/aicasm_insformat.h>
 #endif
 
-/* Were inlined, but moved out-of-line because they are HUGE: */
-#include "aic79xx_osm_o.c"
-#include "aic79xx_inline.c"
+/***************************** Timer Facilities *******************************/
+#define ahd_timer_init init_timer
+#define ahd_timer_stop del_timer_sync
+typedef void ahd_linux_callback_t (u_long);  
+static void
+ahd_timer_reset(ahd_timer_t *timer, int usec, ahd_callback_t *func, void *arg)
+{
+	struct ahd_softc *ahd;
+
+	ahd = (struct ahd_softc *)arg;
+	del_timer(timer);
+	timer->data = (u_long)arg;
+	timer->expires = jiffies + (usec * HZ)/1000000;
+	timer->function = (ahd_linux_callback_t*)func;
+	add_timer(timer);
+}
+
+/***************************** Low Level I/O **********************************/
+uint8_t
+ahd_inb(struct ahd_softc * ahd, long port)
+{
+	uint8_t x;
+
+	if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+		x = readb(ahd->bshs[0].maddr + port);
+	} else {
+		x = inb(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
+	}
+	mb();
+	return (x);
+}
+
+uint16_t
+ahd_inw_atomic(struct ahd_softc * ahd, long port)
+{
+	uint8_t x;
+
+	if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+		x = readw(ahd->bshs[0].maddr + port);
+	} else {
+		x = inw(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
+	}
+	mb();
+	return (x);
+}
+
+void
+ahd_outb(struct ahd_softc * ahd, long port, uint8_t val)
+{
+	if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+		writeb(val, ahd->bshs[0].maddr + port);
+	} else {
+		outb(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
+	}
+	mb();
+}
+
+void
+ahd_outw_atomic(struct ahd_softc * ahd, long port, uint16_t val)
+{
+	if (ahd->tags[0] == BUS_SPACE_MEMIO) {
+		writew(val, ahd->bshs[0].maddr + port);
+	} else {
+		outw(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
+	}
+	mb();
+}
+
+void
+ahd_outsb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
+{
+	int i;
+
+	/*
+	 * There is probably a more efficient way to do this on Linux
+	 * but we don't use this for anything speed critical and this
+	 * should work.
+	 */
+	for (i = 0; i < count; i++)
+		ahd_outb(ahd, port, *array++);
+}
+
+void
+ahd_insb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
+{
+	int i;
+
+	/*
+	 * There is probably a more efficient way to do this on Linux
+	 * but we don't use this for anything speed critical and this
+	 * should work.
+	 */
+	for (i = 0; i < count; i++)
+		*array++ = ahd_inb(ahd, port);
+}
+
+/************************ Sequencer Execution Control *************************/
+void
+ahd_set_modes(struct ahd_softc *ahd, ahd_mode src, ahd_mode dst)
+{
+	if (ahd->src_mode == src && ahd->dst_mode == dst)
+		return;
+#ifdef AHD_DEBUG
+	if (ahd->src_mode == AHD_MODE_UNKNOWN
+	 || ahd->dst_mode == AHD_MODE_UNKNOWN)
+		panic("Setting mode prior to saving it.\n");
+	if ((ahd_debug & AHD_SHOW_MODEPTR) != 0)
+		printf("%s: Setting mode 0x%x\n", ahd_name(ahd),
+		       ahd_build_mode_state(ahd, src, dst));
+#endif
+	ahd_outb(ahd, MODE_PTR, ahd_build_mode_state(ahd, src, dst));
+	ahd->src_mode = src;
+	ahd->dst_mode = dst;
+}
+
+void
+ahd_update_modes(struct ahd_softc *ahd)
+{
+	ahd_mode_state mode_ptr;
+	ahd_mode src;
+	ahd_mode dst;
+
+	mode_ptr = ahd_inb(ahd, MODE_PTR);
+#ifdef AHD_DEBUG
+	if ((ahd_debug & AHD_SHOW_MODEPTR) != 0)
+		printf("Reading mode 0x%x\n", mode_ptr);
+#endif
+	ahd_extract_mode_state(ahd, mode_ptr, &src, &dst);
+	ahd_known_modes(ahd, src, dst);
+}
+
+ahd_mode_state
+ahd_save_modes(struct ahd_softc *ahd)
+{
+	if (ahd->src_mode == AHD_MODE_UNKNOWN
+	 || ahd->dst_mode == AHD_MODE_UNKNOWN)
+		ahd_update_modes(ahd);
+
+	return (ahd_build_mode_state(ahd, ahd->src_mode, ahd->dst_mode));
+}
+
+void
+ahd_restore_modes(struct ahd_softc *ahd, ahd_mode_state state)
+{
+	ahd_mode src;
+	ahd_mode dst;
+
+	ahd_extract_mode_state(ahd, state, &src, &dst);
+	ahd_set_modes(ahd, src, dst);
+}
+
+/*
+ * Allow the sequencer to continue program execution.
+ * We check here to ensure that no additional interrupt
+ * sources that would cause the sequencer to halt have been
+ * asserted.  If, for example, a SCSI bus reset is detected
+ * while we are fielding a different, pausing, interrupt type,
+ * we don't want to release the sequencer before going back
+ * into our interrupt handler and dealing with this new
+ * condition.
+ */
+void
+ahd_unpause(struct ahd_softc *ahd)
+{
+	/*
+	 * Automatically restore our modes to those saved
+	 * prior to the first change of the mode.
+	 */
+	if (ahd->saved_src_mode != AHD_MODE_UNKNOWN
+	 && ahd->saved_dst_mode != AHD_MODE_UNKNOWN) {
+		if ((ahd->flags & AHD_UPDATE_PEND_CMDS) != 0)
+			ahd_reset_cmds_pending(ahd);
+		ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode);
+	}
+
+	if ((ahd_inb(ahd, INTSTAT) & ~CMDCMPLT) == 0)
+		ahd_outb(ahd, HCNTRL, ahd->unpause);
+
+	ahd_known_modes(ahd, AHD_MODE_UNKNOWN, AHD_MODE_UNKNOWN);
+}
+
+/*********************** Scatter Gather List Handling *************************/
+void *
+ahd_sg_setup(struct ahd_softc *ahd, struct scb *scb,
+	     void *sgptr, dma_addr_t addr, bus_size_t len, int last)
+{
+	scb->sg_count++;
+	if (sizeof(dma_addr_t) > 4
+	 && (ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
+		struct ahd_dma64_seg *sg;
+
+		sg = (struct ahd_dma64_seg *)sgptr;
+		sg->addr = ahd_htole64(addr);
+		sg->len = ahd_htole32(len | (last ? AHD_DMA_LAST_SEG : 0));
+		return (sg + 1);
+	} else {
+		struct ahd_dma_seg *sg;
+
+		sg = (struct ahd_dma_seg *)sgptr;
+		sg->addr = ahd_htole32(addr & 0xFFFFFFFF);
+		sg->len = ahd_htole32(len | ((addr >> 8) & 0x7F000000)
+				    | (last ? AHD_DMA_LAST_SEG : 0));
+		return (sg + 1);
+	}
+}
+
+static void
+ahd_setup_scb_common(struct ahd_softc *ahd, struct scb *scb)
+{
+	/* XXX Handle target mode SCBs. */
+	scb->crc_retry_count = 0;
+	if ((scb->flags & SCB_PACKETIZED) != 0) {
+		/* XXX what about ACA??  It is type 4, but TAG_TYPE == 0x3. */
+		scb->hscb->task_attribute = scb->hscb->control & SCB_TAG_TYPE;
+	} else {
+		if (ahd_get_transfer_length(scb) & 0x01)
+			scb->hscb->task_attribute = SCB_XFERLEN_ODD;
+		else
+			scb->hscb->task_attribute = 0;
+	}
+
+	if (scb->hscb->cdb_len <= MAX_CDB_LEN_WITH_SENSE_ADDR
+	 || (scb->hscb->cdb_len & SCB_CDB_LEN_PTR) != 0)
+		scb->hscb->shared_data.idata.cdb_plus_saddr.sense_addr =
+		    ahd_htole32(scb->sense_busaddr);
+}
+
+static void
+ahd_setup_data_scb(struct ahd_softc *ahd, struct scb *scb)
+{
+	/*
+	 * Copy the first SG into the "current" data ponter area.
+	 */
+	if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
+		struct ahd_dma64_seg *sg;
+
+		sg = (struct ahd_dma64_seg *)scb->sg_list;
+		scb->hscb->dataptr = sg->addr;
+		scb->hscb->datacnt = sg->len;
+	} else {
+		struct ahd_dma_seg *sg;
+		uint32_t *dataptr_words;
+
+		sg = (struct ahd_dma_seg *)scb->sg_list;
+		dataptr_words = (uint32_t*)&scb->hscb->dataptr;
+		dataptr_words[0] = sg->addr;
+		dataptr_words[1] = 0;
+		if ((ahd->flags & AHD_39BIT_ADDRESSING) != 0) {
+			uint64_t high_addr;
+
+			high_addr = ahd_le32toh(sg->len) & 0x7F000000;
+			scb->hscb->dataptr |= ahd_htole64(high_addr << 8);
+		}
+		scb->hscb->datacnt = sg->len;
+	}
+	/*
+	 * Note where to find the SG entries in bus space.
+	 * We also set the full residual flag which the 
+	 * sequencer will clear as soon as a data transfer
+	 * occurs.
+	 */
+	scb->hscb->sgptr = ahd_htole32(scb->sg_list_busaddr|SG_FULL_RESID);
+}
+
+/*********************** Miscelaneous Support Functions ***********************/
+uint16_t
+ahd_inw(struct ahd_softc *ahd, u_int port)
+{
+	/*
+	 * Read high byte first as some registers increment
+	 * or have other side effects when the low byte is
+	 * read.
+	 */
+	return ((ahd_inb(ahd, port+1) << 8) | ahd_inb(ahd, port));
+}
+
+void
+ahd_outw(struct ahd_softc *ahd, u_int port, u_int value)
+{
+	/*
+	 * Write low byte first to accomodate registers
+	 * such as PRGMCNT where the order maters.
+	 */
+	ahd_outb(ahd, port, value & 0xFF);
+	ahd_outb(ahd, port+1, (value >> 8) & 0xFF);
+}
+
+uint32_t
+ahd_inl(struct ahd_softc *ahd, u_int port)
+{
+	return ((ahd_inb(ahd, port))
+	      | (ahd_inb(ahd, port+1) << 8)
+	      | (ahd_inb(ahd, port+2) << 16)
+	      | (ahd_inb(ahd, port+3) << 24));
+}
+
+void
+ahd_outl(struct ahd_softc *ahd, u_int port, uint32_t value)
+{
+	ahd_outb(ahd, port, (value) & 0xFF);
+	ahd_outb(ahd, port+1, ((value) >> 8) & 0xFF);
+	ahd_outb(ahd, port+2, ((value) >> 16) & 0xFF);
+	ahd_outb(ahd, port+3, ((value) >> 24) & 0xFF);
+}
+
+uint64_t
+ahd_inq(struct ahd_softc *ahd, u_int port)
+{
+	return ((ahd_inb(ahd, port))
+	      | (ahd_inb(ahd, port+1) << 8)
+	      | (ahd_inb(ahd, port+2) << 16)
+	      | (ahd_inb(ahd, port+3) << 24)
+	      | (((uint64_t)ahd_inb(ahd, port+4)) << 32)
+	      | (((uint64_t)ahd_inb(ahd, port+5)) << 40)
+	      | (((uint64_t)ahd_inb(ahd, port+6)) << 48)
+	      | (((uint64_t)ahd_inb(ahd, port+7)) << 56));
+}
+
+void
+ahd_outq(struct ahd_softc *ahd, u_int port, uint64_t value)
+{
+	ahd_outb(ahd, port, value & 0xFF);
+	ahd_outb(ahd, port+1, (value >> 8) & 0xFF);
+	ahd_outb(ahd, port+2, (value >> 16) & 0xFF);
+	ahd_outb(ahd, port+3, (value >> 24) & 0xFF);
+	ahd_outb(ahd, port+4, (value >> 32) & 0xFF);
+	ahd_outb(ahd, port+5, (value >> 40) & 0xFF);
+	ahd_outb(ahd, port+6, (value >> 48) & 0xFF);
+	ahd_outb(ahd, port+7, (value >> 56) & 0xFF);
+}
+
+u_int
+ahd_inb_scbram(struct ahd_softc *ahd, u_int offset)
+{
+	u_int value;
+
+	/*
+	 * Workaround PCI-X Rev A. hardware bug.
+	 * After a host read of SCB memory, the chip
+	 * may become confused into thinking prefetch
+	 * was required.  This starts the discard timer
+	 * running and can cause an unexpected discard
+	 * timer interrupt.  The work around is to read
+	 * a normal register prior to the exhaustion of
+	 * the discard timer.  The mode pointer register
+	 * has no side effects and so serves well for
+	 * this purpose.
+	 *
+	 * Razor #528
+	 */
+	value = ahd_inb(ahd, offset);
+	if ((ahd->bugs & AHD_PCIX_SCBRAM_RD_BUG) != 0)
+		ahd_inb(ahd, MODE_PTR);
+	return (value);
+}
+
+u_int
+ahd_inw_scbram(struct ahd_softc *ahd, u_int offset)
+{
+	return (ahd_inb_scbram(ahd, offset)
+	      | (ahd_inb_scbram(ahd, offset+1) << 8));
+}
+
+uint32_t
+ahd_inl_scbram(struct ahd_softc *ahd, u_int offset)
+{
+	return (ahd_inw_scbram(ahd, offset)
+	      | (ahd_inw_scbram(ahd, offset+2) << 16));
+}
+
+uint64_t
+ahd_inq_scbram(struct ahd_softc *ahd, u_int offset)
+{
+	return (ahd_inl_scbram(ahd, offset)
+	      | ((uint64_t)ahd_inl_scbram(ahd, offset+4)) << 32);
+}
+
+struct scb *
+ahd_lookup_scb(struct ahd_softc *ahd, u_int tag)
+{
+	struct scb* scb;
+
+	if (tag >= AHD_SCB_MAX)
+		return (NULL);
+	scb = ahd->scb_data.scbindex[tag];
+	if (scb != NULL)
+		ahd_sync_scb(ahd, scb,
+			     BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
+	return (scb);
+}
+
+static void
+ahd_swap_with_next_hscb(struct ahd_softc *ahd, struct scb *scb)
+{
+	struct	 hardware_scb *q_hscb;
+	struct	 map_node *q_hscb_map;
+	uint32_t saved_hscb_busaddr;
+
+	/*
+	 * Our queuing method is a bit tricky.  The card
+	 * knows in advance which HSCB (by address) to download,
+	 * and we can't disappoint it.  To achieve this, the next
+	 * HSCB to download is saved off in ahd->next_queued_hscb.
+	 * When we are called to queue "an arbitrary scb",
+	 * we copy the contents of the incoming HSCB to the one
+	 * the sequencer knows about, swap HSCB pointers and
+	 * finally assign the SCB to the tag indexed location
+	 * in the scb_array.  This makes sure that we can still
+	 * locate the correct SCB by SCB_TAG.
+	 */
+	q_hscb = ahd->next_queued_hscb;
+	q_hscb_map = ahd->next_queued_hscb_map;
+	saved_hscb_busaddr = q_hscb->hscb_busaddr;
+	memcpy(q_hscb, scb->hscb, sizeof(*scb->hscb));
+	q_hscb->hscb_busaddr = saved_hscb_busaddr;
+	q_hscb->next_hscb_busaddr = scb->hscb->hscb_busaddr;
+
+	/* Now swap HSCB pointers. */
+	ahd->next_queued_hscb = scb->hscb;
+	ahd->next_queued_hscb_map = scb->hscb_map;
+	scb->hscb = q_hscb;
+	scb->hscb_map = q_hscb_map;
+
+	/* Now define the mapping from tag to SCB in the scbindex */
+	ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = scb;
+}
+
+/*
+ * Tell the sequencer about a new transaction to execute.
+ */
+void
+ahd_queue_scb(struct ahd_softc *ahd, struct scb *scb)
+{
+	ahd_swap_with_next_hscb(ahd, scb);
+
+	if (SCBID_IS_NULL(SCB_GET_TAG(scb)))
+		panic("Attempt to queue invalid SCB tag %x\n",
+		      SCB_GET_TAG(scb));
+
+	/*
+	 * Keep a history of SCBs we've downloaded in the qinfifo.
+	 */
+	ahd->qinfifo[AHD_QIN_WRAP(ahd->qinfifonext)] = SCB_GET_TAG(scb);
+	ahd->qinfifonext++;
+
+	if (scb->sg_count != 0)
+		ahd_setup_data_scb(ahd, scb);
+	else
+		ahd_setup_noxfer_scb(ahd, scb);
+	ahd_setup_scb_common(ahd, scb);
+
+	/*
+	 * Make sure our data is consistent from the
+	 * perspective of the adapter.
+	 */
+	ahd_sync_scb(ahd, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
+
+#ifdef AHD_DEBUG
+	if ((ahd_debug & AHD_SHOW_QUEUE) != 0) {
+		uint64_t host_dataptr;
+
+		host_dataptr = ahd_le64toh(scb->hscb->dataptr);
+		printf("%s: Queueing SCB %d:0x%x bus addr 0x%x - 0x%x%x/0x%x\n",
+		       ahd_name(ahd),
+		       SCB_GET_TAG(scb), scb->hscb->scsiid,
+		       ahd_le32toh(scb->hscb->hscb_busaddr),
+		       (u_int)((host_dataptr >> 32) & 0xFFFFFFFF),
+		       (u_int)(host_dataptr & 0xFFFFFFFF),
+		       ahd_le32toh(scb->hscb->datacnt));
+	}
+#endif
+	/* Tell the adapter about the newly queued SCB */
+	ahd_set_hnscb_qoff(ahd, ahd->qinfifonext);
+}
+
+/************************** Interrupt Processing ******************************/
+/*
+ * See if the firmware has posted any completed commands
+ * into our in-core command complete fifos.
+ */
+#define AHD_RUN_QOUTFIFO 0x1
+#define AHD_RUN_TQINFIFO 0x2
+static u_int
+ahd_check_cmdcmpltqueues(struct ahd_softc *ahd)
+{
+	u_int retval;
+
+	retval = 0;
+	ahd_dmamap_sync(ahd, ahd->shared_data_dmat, ahd->shared_data_map.dmamap,
+			/*offset*/ahd->qoutfifonext * sizeof(*ahd->qoutfifo),
+			/*len*/sizeof(*ahd->qoutfifo), BUS_DMASYNC_POSTREAD);
+	if (ahd->qoutfifo[ahd->qoutfifonext].valid_tag
+	  == ahd->qoutfifonext_valid_tag)
+		retval |= AHD_RUN_QOUTFIFO;
+#ifdef AHD_TARGET_MODE
+	if ((ahd->flags & AHD_TARGETROLE) != 0
+	 && (ahd->flags & AHD_TQINFIFO_BLOCKED) == 0) {
+		ahd_dmamap_sync(ahd, ahd->shared_data_dmat,
+				ahd->shared_data_map.dmamap,
+				ahd_targetcmd_offset(ahd, ahd->tqinfifofnext),
+				/*len*/sizeof(struct target_cmd),
+				BUS_DMASYNC_POSTREAD);
+		if (ahd->targetcmds[ahd->tqinfifonext].cmd_valid != 0)
+			retval |= AHD_RUN_TQINFIFO;
+	}
+#endif
+	return (retval);
+}
+
+/*
+ * Catch an interrupt from the adapter
+ */
+int
+ahd_intr(struct ahd_softc *ahd)
+{
+	u_int	intstat;
+
+	if ((ahd->pause & INTEN) == 0) {
+		/*
+		 * Our interrupt is not enabled on the chip
+		 * and may be disabled for re-entrancy reasons,
+		 * so just return.  This is likely just a shared
+		 * interrupt.
+		 */
+		return (0);
+	}
+
+	/*
+	 * Instead of directly reading the interrupt status register,
+	 * infer the cause of the interrupt by checking our in-core
+	 * completion queues.  This avoids a costly PCI bus read in
+	 * most cases.
+	 */
+	if ((ahd->flags & AHD_ALL_INTERRUPTS) == 0
+	 && (ahd_check_cmdcmpltqueues(ahd) != 0))
+		intstat = CMDCMPLT;
+	else
+		intstat = ahd_inb(ahd, INTSTAT);
+
+	if ((intstat & INT_PEND) == 0)
+		return (0);
+
+	if (intstat & CMDCMPLT) {
+		ahd_outb(ahd, CLRINT, CLRCMDINT);
+
+		/*
+		 * Ensure that the chip sees that we've cleared
+		 * this interrupt before we walk the output fifo.
+		 * Otherwise, we may, due to posted bus writes,
+		 * clear the interrupt after we finish the scan,
+		 * and after the sequencer has added new entries
+		 * and asserted the interrupt again.
+		 */
+		if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) {
+			if (ahd_is_paused(ahd)) {
+				/*
+				 * Potentially lost SEQINT.
+				 * If SEQINTCODE is non-zero,
+				 * simulate the SEQINT.
+				 */
+				if (ahd_inb(ahd, SEQINTCODE) != NO_SEQINT)
+					intstat |= SEQINT;
+			}
+		} else {
+			ahd_flush_device_writes(ahd);
+		}
+		ahd_run_qoutfifo(ahd);
+		ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket]++;
+		ahd->cmdcmplt_total++;
+#ifdef AHD_TARGET_MODE
+		if ((ahd->flags & AHD_TARGETROLE) != 0)
+			ahd_run_tqinfifo(ahd, /*paused*/FALSE);
+#endif
+	}
+
+	/*
+	 * Handle statuses that may invalidate our cached
+	 * copy of INTSTAT separately.
+	 */
+	if (intstat == 0xFF && (ahd->features & AHD_REMOVABLE) != 0) {
+		/* Hot eject.  Do nothing */
+	} else if (intstat & HWERRINT) {
+		ahd_handle_hwerrint(ahd);
+	} else if ((intstat & (PCIINT|SPLTINT)) != 0) {
+		ahd->bus_intr(ahd);
+	} else {
+
+		if ((intstat & SEQINT) != 0)
+			ahd_handle_seqint(ahd, intstat);
+
+		if ((intstat & SCSIINT) != 0)
+			ahd_handle_scsiint(ahd, intstat);
+	}
+	return (1);
+}
 
 /***************************** Lookup Tables **********************************/
 char *ahd_chip_names[] =
@@ -244,7 +836,7 @@ static int		ahd_handle_target_cmd(struct
 /******************************** Private Inlines *****************************/
 static __inline void	ahd_assert_atn(struct ahd_softc *ahd);
 static __inline int	ahd_currently_packetized(struct ahd_softc *ahd);
-static __inline int	ahd_set_active_fifo(struct ahd_softc *ahd);
+static int		ahd_set_active_fifo(struct ahd_softc *ahd);
 
 static __inline void
 ahd_assert_atn(struct ahd_softc *ahd)
@@ -8279,7 +8871,7 @@ ahd_handle_scsi_status(struct ahd_softc 
 		break;
 	}
 	case SCSI_STATUS_OK:
-		printf("%s: Interrupted for staus of 0???\n",
+		printf("%s: Interrupted for status of 0???\n",
 		       ahd_name(ahd));
 		/* FALLTHROUGH */
 	default:
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_inline.c linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_inline.c
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_inline.c	Tue Apr 11 09:44:03 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_inline.c	Thu Jan  1 03:00:00 1970
@@ -1,460 +0,0 @@
-/*
- * Routines shareable across OS platforms.
- *
- * Formerly inlined routines from aic79xx_inline.h are moved here.
- * This file is #included into aic79xx_core.c
- */
-
-/************************ Sequencer Execution Control *************************/
-void
-ahd_set_modes(struct ahd_softc *ahd, ahd_mode src, ahd_mode dst)
-{
-	if (ahd->src_mode == src && ahd->dst_mode == dst)
-		return;
-#ifdef AHD_DEBUG
-	if (ahd->src_mode == AHD_MODE_UNKNOWN
-	 || ahd->dst_mode == AHD_MODE_UNKNOWN)
-		panic("Setting mode prior to saving it.\n");
-	if ((ahd_debug & AHD_SHOW_MODEPTR) != 0)
-		printf("%s: Setting mode 0x%x\n", ahd_name(ahd),
-		       ahd_build_mode_state(ahd, src, dst));
-#endif
-	ahd_outb(ahd, MODE_PTR, ahd_build_mode_state(ahd, src, dst));
-	ahd->src_mode = src;
-	ahd->dst_mode = dst;
-}
-
-void
-ahd_update_modes(struct ahd_softc *ahd)
-{
-	ahd_mode_state mode_ptr;
-	ahd_mode src;
-	ahd_mode dst;
-
-	mode_ptr = ahd_inb(ahd, MODE_PTR);
-#ifdef AHD_DEBUG
-	if ((ahd_debug & AHD_SHOW_MODEPTR) != 0)
-		printf("Reading mode 0x%x\n", mode_ptr);
-#endif
-	ahd_extract_mode_state(ahd, mode_ptr, &src, &dst);
-	ahd_known_modes(ahd, src, dst);
-}
-
-ahd_mode_state
-ahd_save_modes(struct ahd_softc *ahd)
-{
-	if (ahd->src_mode == AHD_MODE_UNKNOWN
-	 || ahd->dst_mode == AHD_MODE_UNKNOWN)
-		ahd_update_modes(ahd);
-
-	return (ahd_build_mode_state(ahd, ahd->src_mode, ahd->dst_mode));
-}
-
-void
-ahd_restore_modes(struct ahd_softc *ahd, ahd_mode_state state)
-{
-	ahd_mode src;
-	ahd_mode dst;
-
-	ahd_extract_mode_state(ahd, state, &src, &dst);
-	ahd_set_modes(ahd, src, dst);
-}
-
-/*
- * Allow the sequencer to continue program execution.
- * We check here to ensure that no additional interrupt
- * sources that would cause the sequencer to halt have been
- * asserted.  If, for example, a SCSI bus reset is detected
- * while we are fielding a different, pausing, interrupt type,
- * we don't want to release the sequencer before going back
- * into our interrupt handler and dealing with this new
- * condition.
- */
-void
-ahd_unpause(struct ahd_softc *ahd)
-{
-	/*
-	 * Automatically restore our modes to those saved
-	 * prior to the first change of the mode.
-	 */
-	if (ahd->saved_src_mode != AHD_MODE_UNKNOWN
-	 && ahd->saved_dst_mode != AHD_MODE_UNKNOWN) {
-		if ((ahd->flags & AHD_UPDATE_PEND_CMDS) != 0)
-			ahd_reset_cmds_pending(ahd);
-		ahd_set_modes(ahd, ahd->saved_src_mode, ahd->saved_dst_mode);
-	}
-
-	if ((ahd_inb(ahd, INTSTAT) & ~CMDCMPLT) == 0)
-		ahd_outb(ahd, HCNTRL, ahd->unpause);
-
-	ahd_known_modes(ahd, AHD_MODE_UNKNOWN, AHD_MODE_UNKNOWN);
-}
-
-/*********************** Scatter Gather List Handling *************************/
-void *
-ahd_sg_setup(struct ahd_softc *ahd, struct scb *scb,
-	     void *sgptr, dma_addr_t addr, bus_size_t len, int last)
-{
-	scb->sg_count++;
-	if (sizeof(dma_addr_t) > 4
-	 && (ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
-		struct ahd_dma64_seg *sg;
-
-		sg = (struct ahd_dma64_seg *)sgptr;
-		sg->addr = ahd_htole64(addr);
-		sg->len = ahd_htole32(len | (last ? AHD_DMA_LAST_SEG : 0));
-		return (sg + 1);
-	} else {
-		struct ahd_dma_seg *sg;
-
-		sg = (struct ahd_dma_seg *)sgptr;
-		sg->addr = ahd_htole32(addr & 0xFFFFFFFF);
-		sg->len = ahd_htole32(len | ((addr >> 8) & 0x7F000000)
-				    | (last ? AHD_DMA_LAST_SEG : 0));
-		return (sg + 1);
-	}
-}
-
-void
-ahd_setup_scb_common(struct ahd_softc *ahd, struct scb *scb)
-{
-	/* XXX Handle target mode SCBs. */
-	scb->crc_retry_count = 0;
-	if ((scb->flags & SCB_PACKETIZED) != 0) {
-		/* XXX what about ACA??  It is type 4, but TAG_TYPE == 0x3. */
-		scb->hscb->task_attribute = scb->hscb->control & SCB_TAG_TYPE;
-	} else {
-		if (ahd_get_transfer_length(scb) & 0x01)
-			scb->hscb->task_attribute = SCB_XFERLEN_ODD;
-		else
-			scb->hscb->task_attribute = 0;
-	}
-
-	if (scb->hscb->cdb_len <= MAX_CDB_LEN_WITH_SENSE_ADDR
-	 || (scb->hscb->cdb_len & SCB_CDB_LEN_PTR) != 0)
-		scb->hscb->shared_data.idata.cdb_plus_saddr.sense_addr =
-		    ahd_htole32(scb->sense_busaddr);
-}
-
-void
-ahd_setup_data_scb(struct ahd_softc *ahd, struct scb *scb)
-{
-	/*
-	 * Copy the first SG into the "current" data ponter area.
-	 */
-	if ((ahd->flags & AHD_64BIT_ADDRESSING) != 0) {
-		struct ahd_dma64_seg *sg;
-
-		sg = (struct ahd_dma64_seg *)scb->sg_list;
-		scb->hscb->dataptr = sg->addr;
-		scb->hscb->datacnt = sg->len;
-	} else {
-		struct ahd_dma_seg *sg;
-		uint32_t *dataptr_words;
-
-		sg = (struct ahd_dma_seg *)scb->sg_list;
-		dataptr_words = (uint32_t*)&scb->hscb->dataptr;
-		dataptr_words[0] = sg->addr;
-		dataptr_words[1] = 0;
-		if ((ahd->flags & AHD_39BIT_ADDRESSING) != 0) {
-			uint64_t high_addr;
-
-			high_addr = ahd_le32toh(sg->len) & 0x7F000000;
-			scb->hscb->dataptr |= ahd_htole64(high_addr << 8);
-		}
-		scb->hscb->datacnt = sg->len;
-	}
-	/*
-	 * Note where to find the SG entries in bus space.
-	 * We also set the full residual flag which the
-	 * sequencer will clear as soon as a data transfer
-	 * occurs.
-	 */
-	scb->hscb->sgptr = ahd_htole32(scb->sg_list_busaddr|SG_FULL_RESID);
-}
-
-/*********************** Miscelaneous Support Functions ***********************/
-uint16_t
-ahd_inw(struct ahd_softc *ahd, u_int port)
-{
-	/*
-	 * Read high byte first as some registers increment
-	 * or have other side effects when the low byte is
-	 * read.
-	 */
-	return ((ahd_inb(ahd, port+1) << 8) | ahd_inb(ahd, port));
-}
-
-void
-ahd_outw(struct ahd_softc *ahd, u_int port, u_int value)
-{
-	/*
-	 * Write low byte first to accomodate registers
-	 * such as PRGMCNT where the order maters.
-	 */
-	ahd_outb(ahd, port, value & 0xFF);
-	ahd_outb(ahd, port+1, (value >> 8) & 0xFF);
-}
-
-uint32_t
-ahd_inl(struct ahd_softc *ahd, u_int port)
-{
-	return ((ahd_inb(ahd, port))
-	      | (ahd_inb(ahd, port+1) << 8)
-	      | (ahd_inb(ahd, port+2) << 16)
-	      | (ahd_inb(ahd, port+3) << 24));
-}
-
-void
-ahd_outl(struct ahd_softc *ahd, u_int port, uint32_t value)
-{
-	ahd_outb(ahd, port, (value) & 0xFF);
-	ahd_outb(ahd, port+1, ((value) >> 8) & 0xFF);
-	ahd_outb(ahd, port+2, ((value) >> 16) & 0xFF);
-	ahd_outb(ahd, port+3, ((value) >> 24) & 0xFF);
-}
-
-uint64_t
-ahd_inq(struct ahd_softc *ahd, u_int port)
-{
-	return ((ahd_inb(ahd, port))
-	      | (ahd_inb(ahd, port+1) << 8)
-	      | (ahd_inb(ahd, port+2) << 16)
-	      | (ahd_inb(ahd, port+3) << 24)
-	      | (((uint64_t)ahd_inb(ahd, port+4)) << 32)
-	      | (((uint64_t)ahd_inb(ahd, port+5)) << 40)
-	      | (((uint64_t)ahd_inb(ahd, port+6)) << 48)
-	      | (((uint64_t)ahd_inb(ahd, port+7)) << 56));
-}
-
-void
-ahd_outq(struct ahd_softc *ahd, u_int port, uint64_t value)
-{
-	ahd_outb(ahd, port, value & 0xFF);
-	ahd_outb(ahd, port+1, (value >> 8) & 0xFF);
-	ahd_outb(ahd, port+2, (value >> 16) & 0xFF);
-	ahd_outb(ahd, port+3, (value >> 24) & 0xFF);
-	ahd_outb(ahd, port+4, (value >> 32) & 0xFF);
-	ahd_outb(ahd, port+5, (value >> 40) & 0xFF);
-	ahd_outb(ahd, port+6, (value >> 48) & 0xFF);
-	ahd_outb(ahd, port+7, (value >> 56) & 0xFF);
-}
-
-struct scb *
-ahd_lookup_scb(struct ahd_softc *ahd, u_int tag)
-{
-	struct scb* scb;
-
-	if (tag >= AHD_SCB_MAX)
-		return (NULL);
-	scb = ahd->scb_data.scbindex[tag];
-	if (scb != NULL)
-		ahd_sync_scb(ahd, scb,
-			     BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
-	return (scb);
-}
-
-void
-ahd_swap_with_next_hscb(struct ahd_softc *ahd, struct scb *scb)
-{
-	struct	 hardware_scb *q_hscb;
-	struct	 map_node *q_hscb_map;
-	uint32_t saved_hscb_busaddr;
-
-	/*
-	 * Our queuing method is a bit tricky.  The card
-	 * knows in advance which HSCB (by address) to download,
-	 * and we can't disappoint it.  To achieve this, the next
-	 * HSCB to download is saved off in ahd->next_queued_hscb.
-	 * When we are called to queue "an arbitrary scb",
-	 * we copy the contents of the incoming HSCB to the one
-	 * the sequencer knows about, swap HSCB pointers and
-	 * finally assign the SCB to the tag indexed location
-	 * in the scb_array.  This makes sure that we can still
-	 * locate the correct SCB by SCB_TAG.
-	 */
-	q_hscb = ahd->next_queued_hscb;
-	q_hscb_map = ahd->next_queued_hscb_map;
-	saved_hscb_busaddr = q_hscb->hscb_busaddr;
-	memcpy(q_hscb, scb->hscb, sizeof(*scb->hscb));
-	q_hscb->hscb_busaddr = saved_hscb_busaddr;
-	q_hscb->next_hscb_busaddr = scb->hscb->hscb_busaddr;
-
-	/* Now swap HSCB pointers. */
-	ahd->next_queued_hscb = scb->hscb;
-	ahd->next_queued_hscb_map = scb->hscb_map;
-	scb->hscb = q_hscb;
-	scb->hscb_map = q_hscb_map;
-
-	/* Now define the mapping from tag to SCB in the scbindex */
-	ahd->scb_data.scbindex[SCB_GET_TAG(scb)] = scb;
-}
-
-/*
- * Tell the sequencer about a new transaction to execute.
- */
-void
-ahd_queue_scb(struct ahd_softc *ahd, struct scb *scb)
-{
-	ahd_swap_with_next_hscb(ahd, scb);
-
-	if (SCBID_IS_NULL(SCB_GET_TAG(scb)))
-		panic("Attempt to queue invalid SCB tag %x\n",
-		      SCB_GET_TAG(scb));
-
-	/*
-	 * Keep a history of SCBs we've downloaded in the qinfifo.
-	 */
-	ahd->qinfifo[AHD_QIN_WRAP(ahd->qinfifonext)] = SCB_GET_TAG(scb);
-	ahd->qinfifonext++;
-
-	if (scb->sg_count != 0)
-		ahd_setup_data_scb(ahd, scb);
-	else
-		ahd_setup_noxfer_scb(ahd, scb);
-	ahd_setup_scb_common(ahd, scb);
-
-	/*
-	 * Make sure our data is consistent from the
-	 * perspective of the adapter.
-	 */
-	ahd_sync_scb(ahd, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
-
-#ifdef AHD_DEBUG
-	if ((ahd_debug & AHD_SHOW_QUEUE) != 0) {
-		uint64_t host_dataptr;
-
-		host_dataptr = ahd_le64toh(scb->hscb->dataptr);
-		printf("%s: Queueing SCB %d:0x%x bus addr 0x%x - 0x%x%x/0x%x\n",
-		       ahd_name(ahd),
-		       SCB_GET_TAG(scb), scb->hscb->scsiid,
-		       ahd_le32toh(scb->hscb->hscb_busaddr),
-		       (u_int)((host_dataptr >> 32) & 0xFFFFFFFF),
-		       (u_int)(host_dataptr & 0xFFFFFFFF),
-		       ahd_le32toh(scb->hscb->datacnt));
-	}
-#endif
-	/* Tell the adapter about the newly queued SCB */
-	ahd_set_hnscb_qoff(ahd, ahd->qinfifonext);
-}
-
-/************************** Interrupt Processing ******************************/
-/*
- * See if the firmware has posted any completed commands
- * into our in-core command complete fifos.
- */
-#define AHD_RUN_QOUTFIFO 0x1
-#define AHD_RUN_TQINFIFO 0x2
-u_int
-ahd_check_cmdcmpltqueues(struct ahd_softc *ahd)
-{
-	u_int retval;
-
-	retval = 0;
-	ahd_dmamap_sync(ahd, ahd->shared_data_dmat, ahd->shared_data_map.dmamap,
-			/*offset*/ahd->qoutfifonext * sizeof(*ahd->qoutfifo),
-			/*len*/sizeof(*ahd->qoutfifo), BUS_DMASYNC_POSTREAD);
-	if (ahd->qoutfifo[ahd->qoutfifonext].valid_tag
-	  == ahd->qoutfifonext_valid_tag)
-		retval |= AHD_RUN_QOUTFIFO;
-#ifdef AHD_TARGET_MODE
-	if ((ahd->flags & AHD_TARGETROLE) != 0
-	 && (ahd->flags & AHD_TQINFIFO_BLOCKED) == 0) {
-		ahd_dmamap_sync(ahd, ahd->shared_data_dmat,
-				ahd->shared_data_map.dmamap,
-				ahd_targetcmd_offset(ahd, ahd->tqinfifofnext),
-				/*len*/sizeof(struct target_cmd),
-				BUS_DMASYNC_POSTREAD);
-		if (ahd->targetcmds[ahd->tqinfifonext].cmd_valid != 0)
-			retval |= AHD_RUN_TQINFIFO;
-	}
-#endif
-	return (retval);
-}
-
-/*
- * Catch an interrupt from the adapter
- */
-int
-ahd_intr(struct ahd_softc *ahd)
-{
-	u_int	intstat;
-
-	if ((ahd->pause & INTEN) == 0) {
-		/*
-		 * Our interrupt is not enabled on the chip
-		 * and may be disabled for re-entrancy reasons,
-		 * so just return.  This is likely just a shared
-		 * interrupt.
-		 */
-		return (0);
-	}
-
-	/*
-	 * Instead of directly reading the interrupt status register,
-	 * infer the cause of the interrupt by checking our in-core
-	 * completion queues.  This avoids a costly PCI bus read in
-	 * most cases.
-	 */
-	if ((ahd->flags & AHD_ALL_INTERRUPTS) == 0
-	 && (ahd_check_cmdcmpltqueues(ahd) != 0))
-		intstat = CMDCMPLT;
-	else
-		intstat = ahd_inb(ahd, INTSTAT);
-
-	if ((intstat & INT_PEND) == 0)
-		return (0);
-
-	if (intstat & CMDCMPLT) {
-		ahd_outb(ahd, CLRINT, CLRCMDINT);
-
-		/*
-		 * Ensure that the chip sees that we've cleared
-		 * this interrupt before we walk the output fifo.
-		 * Otherwise, we may, due to posted bus writes,
-		 * clear the interrupt after we finish the scan,
-		 * and after the sequencer has added new entries
-		 * and asserted the interrupt again.
-		 */
-		if ((ahd->bugs & AHD_INTCOLLISION_BUG) != 0) {
-			if (ahd_is_paused(ahd)) {
-				/*
-				 * Potentially lost SEQINT.
-				 * If SEQINTCODE is non-zero,
-				 * simulate the SEQINT.
-				 */
-				if (ahd_inb(ahd, SEQINTCODE) != NO_SEQINT)
-					intstat |= SEQINT;
-			}
-		} else {
-			ahd_flush_device_writes(ahd);
-		}
-		ahd_run_qoutfifo(ahd);
-		ahd->cmdcmplt_counts[ahd->cmdcmplt_bucket]++;
-		ahd->cmdcmplt_total++;
-#ifdef AHD_TARGET_MODE
-		if ((ahd->flags & AHD_TARGETROLE) != 0)
-			ahd_run_tqinfifo(ahd, /*paused*/FALSE);
-#endif
-	}
-
-	/*
-	 * Handle statuses that may invalidate our cached
-	 * copy of INTSTAT separately.
-	 */
-	if (intstat == 0xFF && (ahd->features & AHD_REMOVABLE) != 0) {
-		/* Hot eject.  Do nothing */
-	} else if (intstat & HWERRINT) {
-		ahd_handle_hwerrint(ahd);
-	} else if ((intstat & (PCIINT|SPLTINT)) != 0) {
-		ahd->bus_intr(ahd);
-	} else {
-
-		if ((intstat & SEQINT) != 0)
-			ahd_handle_seqint(ahd, intstat);
-
-		if ((intstat & SCSIINT) != 0)
-			ahd_handle_scsiint(ahd, intstat);
-	}
-	return (1);
-}
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_inline.h linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_inline.h
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_inline.h	Tue Apr 11 09:44:03 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_inline.h	Tue Apr 11 09:46:50 2006
@@ -149,10 +149,6 @@ ahd_pause(struct ahd_softc *ahd)
 void	*ahd_sg_setup(struct ahd_softc *ahd, struct scb *scb,
 				      void *sgptr, dma_addr_t addr,
 				      bus_size_t len, int last);
-void	 ahd_setup_scb_common(struct ahd_softc *ahd,
-					      struct scb *scb);
-void	 ahd_setup_data_scb(struct ahd_softc *ahd,
-					    struct scb *scb);
 static __inline void	 ahd_setup_noxfer_scb(struct ahd_softc *ahd,
 					      struct scb *scb);
 
@@ -279,16 +275,11 @@ static __inline u_int	ahd_get_sescb_qoff
 static __inline void	ahd_set_sescb_qoff(struct ahd_softc *ahd, u_int value);
 static __inline u_int	ahd_get_sdscb_qoff(struct ahd_softc *ahd);
 static __inline void	ahd_set_sdscb_qoff(struct ahd_softc *ahd, u_int value);
-static __inline u_int	ahd_inb_scbram(struct ahd_softc *ahd, u_int offset);
-static __inline u_int	ahd_inw_scbram(struct ahd_softc *ahd, u_int offset);
-static __inline uint32_t
-			ahd_inl_scbram(struct ahd_softc *ahd, u_int offset);
-static __inline uint64_t
-			ahd_inq_scbram(struct ahd_softc *ahd, u_int offset);
-struct scb *
-			ahd_lookup_scb(struct ahd_softc *ahd, u_int tag);
-void	ahd_swap_with_next_hscb(struct ahd_softc *ahd,
-						struct scb *scb);
+u_int	ahd_inb_scbram(struct ahd_softc *ahd, u_int offset);
+u_int	ahd_inw_scbram(struct ahd_softc *ahd, u_int offset);
+uint32_t ahd_inl_scbram(struct ahd_softc *ahd, u_int offset);
+uint64_t ahd_inq_scbram(struct ahd_softc *ahd, u_int offset);
+struct scb *ahd_lookup_scb(struct ahd_softc *ahd, u_int tag);
 void	ahd_queue_scb(struct ahd_softc *ahd, struct scb *scb);
 static __inline uint8_t *
 			ahd_get_sense_buf(struct ahd_softc *ahd,
@@ -437,52 +428,6 @@ ahd_set_sdscb_qoff(struct ahd_softc *ahd
 	ahd_outb(ahd, SDSCB_QOFF+1, (value >> 8) & 0xFF);
 }
 
-static __inline u_int
-ahd_inb_scbram(struct ahd_softc *ahd, u_int offset)
-{
-	u_int value;
-
-	/*
-	 * Workaround PCI-X Rev A. hardware bug.
-	 * After a host read of SCB memory, the chip
-	 * may become confused into thinking prefetch
-	 * was required.  This starts the discard timer
-	 * running and can cause an unexpected discard
-	 * timer interrupt.  The work around is to read
-	 * a normal register prior to the exhaustion of
-	 * the discard timer.  The mode pointer register
-	 * has no side effects and so serves well for
-	 * this purpose.
-	 *
-	 * Razor #528
-	 */
-	value = ahd_inb(ahd, offset);
-	if ((ahd->bugs & AHD_PCIX_SCBRAM_RD_BUG) != 0)
-		ahd_inb(ahd, MODE_PTR);
-	return (value);
-}
-
-static __inline u_int
-ahd_inw_scbram(struct ahd_softc *ahd, u_int offset)
-{
-	return (ahd_inb_scbram(ahd, offset)
-	      | (ahd_inb_scbram(ahd, offset+1) << 8));
-}
-
-static __inline uint32_t
-ahd_inl_scbram(struct ahd_softc *ahd, u_int offset)
-{
-	return (ahd_inw_scbram(ahd, offset)
-	      | (ahd_inw_scbram(ahd, offset+2) << 16));
-}
-
-static __inline uint64_t
-ahd_inq_scbram(struct ahd_softc *ahd, u_int offset)
-{
-	return (ahd_inl_scbram(ahd, offset)
-	      | ((uint64_t)ahd_inl_scbram(ahd, offset+4)) << 32);
-}
-
 static __inline uint8_t *
 ahd_get_sense_buf(struct ahd_softc *ahd, struct scb *scb)
 {
@@ -498,7 +443,6 @@ ahd_get_sense_bufaddr(struct ahd_softc *
 /************************** Interrupt Processing ******************************/
 static __inline void	ahd_sync_qoutfifo(struct ahd_softc *ahd, int op);
 static __inline void	ahd_sync_tqinfifo(struct ahd_softc *ahd, int op);
-u_int	ahd_check_cmdcmpltqueues(struct ahd_softc *ahd);
 int	ahd_intr(struct ahd_softc *ahd);
 
 static __inline void
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_osm.h linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_osm.h
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_osm.h	Tue Apr 11 09:44:03 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_osm.h	Tue Apr 11 09:46:50 2006
@@ -222,13 +222,6 @@ typedef struct timer_list ahd_timer_t;
 #endif
 #include "aic79xx.h"
 
-/***************************** Timer Facilities *******************************/
-#define ahd_timer_init init_timer
-#define ahd_timer_stop del_timer_sync
-typedef void ahd_linux_callback_t (u_long);  
-void ahd_timer_reset(ahd_timer_t *timer, int usec,
-				     ahd_callback_t *func, void *arg);
-
 /***************************** SMP support ************************************/
 #include <linux/spinlock.h>
 
@@ -386,7 +379,10 @@ struct ahd_platform_data {
 #define malloc(size, type, flags) kmalloc(size, flags)
 #define free(ptr, type) kfree(ptr)
 
-void ahd_delay(long);
+static inline void ahd_delay(int usec)
+{
+	udelay(usec);
+}
 
 /***************************** Low Level I/O **********************************/
 uint8_t ahd_inb(struct ahd_softc * ahd, long port);
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_osm_o.c linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_osm_o.c
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_osm_o.c	Tue Apr 11 09:44:03 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_osm_o.c	Thu Jan  1 03:00:00 1970
@@ -1,114 +0,0 @@
-/*
- * Adaptec AIC79xx device driver for Linux.
- *
- * Formerly inlined routines from aic79xx_osm.h are moved here.
- * This file is #included into aic79xx_core.c
- */
-
-/***************************** Timer Facilities *******************************/
-void
-ahd_timer_reset(ahd_timer_t *timer, int usec, ahd_callback_t *func, void *arg)
-{
-	struct ahd_softc *ahd;
-
-	ahd = (struct ahd_softc *)arg;
-	del_timer(timer);
-	timer->data = (u_long)arg;
-	timer->expires = jiffies + (usec * HZ)/1000000;
-	timer->function = (ahd_linux_callback_t*)func;
-	add_timer(timer);
-}
-
-/************************** OS Utility Wrappers *******************************/
-void
-ahd_delay(long usec)
-{
-	/*
-	 * udelay on Linux can have problems for
-	 * multi-millisecond waits.  Wait at most
-	 * 1024us per call.
-	 */
-	while (usec > 0) {
-		udelay(usec % 1024);
-		usec -= 1024;
-	}
-}
-
-/***************************** Low Level I/O **********************************/
-uint8_t
-ahd_inb(struct ahd_softc * ahd, long port)
-{
-	uint8_t x;
-
-	if (ahd->tags[0] == BUS_SPACE_MEMIO) {
-		x = readb(ahd->bshs[0].maddr + port);
-	} else {
-		x = inb(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
-	}
-	mb();
-	return (x);
-}
-
-uint16_t
-ahd_inw_atomic(struct ahd_softc * ahd, long port)
-{
-	uint8_t x;
-
-	if (ahd->tags[0] == BUS_SPACE_MEMIO) {
-		x = readw(ahd->bshs[0].maddr + port);
-	} else {
-		x = inw(ahd->bshs[(port) >> 8].ioport + ((port) & 0xFF));
-	}
-	mb();
-	return (x);
-}
-
-void
-ahd_outb(struct ahd_softc * ahd, long port, uint8_t val)
-{
-	if (ahd->tags[0] == BUS_SPACE_MEMIO) {
-		writeb(val, ahd->bshs[0].maddr + port);
-	} else {
-		outb(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
-	}
-	mb();
-}
-
-void
-ahd_outw_atomic(struct ahd_softc * ahd, long port, uint16_t val)
-{
-	if (ahd->tags[0] == BUS_SPACE_MEMIO) {
-		writew(val, ahd->bshs[0].maddr + port);
-	} else {
-		outw(val, ahd->bshs[(port) >> 8].ioport + (port & 0xFF));
-	}
-	mb();
-}
-
-void
-ahd_outsb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
-{
-	int i;
-
-	/*
-	 * There is probably a more efficient way to do this on Linux
-	 * but we don't use this for anything speed critical and this
-	 * should work.
-	 */
-	for (i = 0; i < count; i++)
-		ahd_outb(ahd, port, *array++);
-}
-
-void
-ahd_insb(struct ahd_softc * ahd, long port, uint8_t *array, int count)
-{
-	int i;
-
-	/*
-	 * There is probably a more efficient way to do this on Linux
-	 * but we don't use this for anything speed critical and this
-	 * should work.
-	 */
-	for (i = 0; i < count; i++)
-		*array++ = ahd_inb(ahd, port);
-}
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_pci.c linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_pci.c
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic79xx_pci.c	Mon Mar 20 07:53:29 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic79xx_pci.c	Tue Apr 11 09:46:50 2006
@@ -51,6 +51,8 @@
 
 #include "aic79xx_pci.h"
 
+static void ahd_pci_intr(struct ahd_softc *ahd);
+
 static __inline uint64_t
 ahd_compose_id(u_int device, u_int vendor, u_int subdevice, u_int subvendor)
 {
@@ -757,7 +759,7 @@ static const char *pci_status_strings[] 
 	"%s: Address or Write Phase Parity Error Detected in %s.\n"
 };
 
-void
+static void
 ahd_pci_intr(struct ahd_softc *ahd)
 {
 	uint8_t		pci_status[8];
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic7xxx_core.c linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic7xxx_core.c
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic7xxx_core.c	Tue Apr 11 09:44:03 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic7xxx_core.c	Tue Apr 11 09:46:50 2006
@@ -50,9 +50,364 @@
 #include <dev/aic7xxx/aicasm/aicasm_insformat.h>
 #endif
 
-/* Were inlined, but moved out-of-line because they are HUGE: */
-#include "aic7xxx_osm_o.c"
-#include "aic7xxx_inline.c"
+/***************************** Low Level I/O **********************************/
+uint8_t
+ahc_inb(struct ahc_softc * ahc, long port)
+{
+	uint8_t x;
+
+	if (ahc->tag == BUS_SPACE_MEMIO) {
+		x = readb(ahc->bsh.maddr + port);
+	} else {
+		x = inb(ahc->bsh.ioport + port);
+	}
+	mb();
+	return (x);
+}
+
+void
+ahc_outb(struct ahc_softc * ahc, long port, uint8_t val)
+{
+	if (ahc->tag == BUS_SPACE_MEMIO) {
+		writeb(val, ahc->bsh.maddr + port);
+	} else {
+		outb(val, ahc->bsh.ioport + port);
+	}
+	mb();
+}
+
+void
+ahc_outsb(struct ahc_softc * ahc, long port, uint8_t *array, int count)
+{
+	int i;
+
+	/*
+	 * There is probably a more efficient way to do this on Linux
+	 * but we don't use this for anything speed critical and this
+	 * should work.
+	 */
+	for (i = 0; i < count; i++)
+		ahc_outb(ahc, port, *array++);
+}
+
+void
+ahc_insb(struct ahc_softc * ahc, long port, uint8_t *array, int count)
+{
+	int i;
+
+	/*
+	 * There is probably a more efficient way to do this on Linux
+	 * but we don't use this for anything speed critical and this
+	 * should work.
+	 */
+	for (i = 0; i < count; i++)
+		*array++ = ahc_inb(ahc, port);
+}
+
+/*********************** Miscelaneous Support Functions ***********************/
+uint16_t
+ahc_inw(struct ahc_softc *ahc, u_int port)
+{
+	return ((ahc_inb(ahc, port+1) << 8) | ahc_inb(ahc, port));
+}
+
+void
+ahc_outw(struct ahc_softc *ahc, u_int port, u_int value)
+{
+	ahc_outb(ahc, port, value & 0xFF);
+	ahc_outb(ahc, port+1, (value >> 8) & 0xFF);
+}
+
+uint32_t
+ahc_inl(struct ahc_softc *ahc, u_int port)
+{
+	return ((ahc_inb(ahc, port))
+	      | (ahc_inb(ahc, port+1) << 8)
+	      | (ahc_inb(ahc, port+2) << 16)
+	      | (ahc_inb(ahc, port+3) << 24));
+}
+
+void
+ahc_outl(struct ahc_softc *ahc, u_int port, uint32_t value)
+{
+	ahc_outb(ahc, port, (value) & 0xFF);
+	ahc_outb(ahc, port+1, ((value) >> 8) & 0xFF);
+	ahc_outb(ahc, port+2, ((value) >> 16) & 0xFF);
+	ahc_outb(ahc, port+3, ((value) >> 24) & 0xFF);
+}
+
+uint64_t
+ahc_inq(struct ahc_softc *ahc, u_int port)
+{
+	return ((ahc_inb(ahc, port))
+	      | (ahc_inb(ahc, port+1) << 8)
+	      | (ahc_inb(ahc, port+2) << 16)
+	      | (ahc_inb(ahc, port+3) << 24)
+	      | (((uint64_t)ahc_inb(ahc, port+4)) << 32)
+	      | (((uint64_t)ahc_inb(ahc, port+5)) << 40)
+	      | (((uint64_t)ahc_inb(ahc, port+6)) << 48)
+	      | (((uint64_t)ahc_inb(ahc, port+7)) << 56));
+}
+
+void
+ahc_outq(struct ahc_softc *ahc, u_int port, uint64_t value)
+{
+	ahc_outb(ahc, port, value & 0xFF);
+	ahc_outb(ahc, port+1, (value >> 8) & 0xFF);
+	ahc_outb(ahc, port+2, (value >> 16) & 0xFF);
+	ahc_outb(ahc, port+3, (value >> 24) & 0xFF);
+	ahc_outb(ahc, port+4, (value >> 32) & 0xFF);
+	ahc_outb(ahc, port+5, (value >> 40) & 0xFF);
+	ahc_outb(ahc, port+6, (value >> 48) & 0xFF);
+	ahc_outb(ahc, port+7, (value >> 56) & 0xFF);
+}
+
+/*
+ * Get a free scb. If there are none, see if we can allocate a new SCB.
+ */
+struct scb *
+ahc_get_scb(struct ahc_softc *ahc)
+{
+	struct scb *scb;
+
+	if ((scb = SLIST_FIRST(&ahc->scb_data->free_scbs)) == NULL) {
+		ahc_alloc_scbs(ahc);
+		scb = SLIST_FIRST(&ahc->scb_data->free_scbs);
+		if (scb == NULL)
+			return (NULL);
+	}
+	SLIST_REMOVE_HEAD(&ahc->scb_data->free_scbs, links.sle);
+	return (scb);
+}
+
+/*
+ * Return an SCB resource to the free list.
+ */
+void
+ahc_free_scb(struct ahc_softc *ahc, struct scb *scb)
+{       
+	struct hardware_scb *hscb;
+
+	hscb = scb->hscb;
+	/* Clean up for the next user */
+	ahc->scb_data->scbindex[hscb->tag] = NULL;
+	scb->flags = SCB_FREE;
+	hscb->control = 0;
+
+	SLIST_INSERT_HEAD(&ahc->scb_data->free_scbs, scb, links.sle);
+
+	/* Notify the OSM that a resource is now available. */
+	ahc_platform_scb_free(ahc, scb);
+}
+
+struct scb *
+ahc_lookup_scb(struct ahc_softc *ahc, u_int tag)
+{
+	struct scb* scb;
+
+	scb = ahc->scb_data->scbindex[tag];
+	if (scb != NULL)
+		ahc_sync_scb(ahc, scb,
+			     BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
+	return (scb);
+}
+
+static void
+ahc_swap_with_next_hscb(struct ahc_softc *ahc, struct scb *scb)
+{
+	struct hardware_scb *q_hscb;
+	u_int  saved_tag;
+
+	/*
+	 * Our queuing method is a bit tricky.  The card
+	 * knows in advance which HSCB to download, and we
+	 * can't disappoint it.  To achieve this, the next
+	 * SCB to download is saved off in ahc->next_queued_scb.
+	 * When we are called to queue "an arbitrary scb",
+	 * we copy the contents of the incoming HSCB to the one
+	 * the sequencer knows about, swap HSCB pointers and
+	 * finally assign the SCB to the tag indexed location
+	 * in the scb_array.  This makes sure that we can still
+	 * locate the correct SCB by SCB_TAG.
+	 */
+	q_hscb = ahc->next_queued_scb->hscb;
+	saved_tag = q_hscb->tag;
+	memcpy(q_hscb, scb->hscb, sizeof(*scb->hscb));
+	if ((scb->flags & SCB_CDB32_PTR) != 0) {
+		q_hscb->shared_data.cdb_ptr =
+		    ahc_htole32(ahc_hscb_busaddr(ahc, q_hscb->tag)
+			      + offsetof(struct hardware_scb, cdb32));
+	}
+	q_hscb->tag = saved_tag;
+	q_hscb->next = scb->hscb->tag;
+
+	/* Now swap HSCB pointers. */
+	ahc->next_queued_scb->hscb = scb->hscb;
+	scb->hscb = q_hscb;
+
+	/* Now define the mapping from tag to SCB in the scbindex */
+	ahc->scb_data->scbindex[scb->hscb->tag] = scb;
+}
+
+/*
+ * Tell the sequencer about a new transaction to execute.
+ */
+void
+ahc_queue_scb(struct ahc_softc *ahc, struct scb *scb)
+{
+	ahc_swap_with_next_hscb(ahc, scb);
+
+	if (scb->hscb->tag == SCB_LIST_NULL
+	 || scb->hscb->next == SCB_LIST_NULL)
+		panic("Attempt to queue invalid SCB tag %x:%x\n",
+		      scb->hscb->tag, scb->hscb->next);
+
+	/*
+	 * Setup data "oddness".
+	 */
+	scb->hscb->lun &= LID;
+	if (ahc_get_transfer_length(scb) & 0x1)
+		scb->hscb->lun |= SCB_XFERLEN_ODD;
+
+	/*
+	 * Keep a history of SCBs we've downloaded in the qinfifo.
+	 */
+	ahc->qinfifo[ahc->qinfifonext++] = scb->hscb->tag;
+
+	/*
+	 * Make sure our data is consistent from the
+	 * perspective of the adapter.
+	 */
+	ahc_sync_scb(ahc, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
+
+	/* Tell the adapter about the newly queued SCB */
+	if ((ahc->features & AHC_QUEUE_REGS) != 0) {
+		ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext);
+	} else {
+		if ((ahc->features & AHC_AUTOPAUSE) == 0)
+			ahc_pause(ahc);
+		ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext);
+		if ((ahc->features & AHC_AUTOPAUSE) == 0)
+			ahc_unpause(ahc);
+	}
+}
+
+/************************** Interrupt Processing ******************************/
+/*
+ * See if the firmware has posted any completed commands
+ * into our in-core command complete fifos.
+ */
+#define AHC_RUN_QOUTFIFO 0x1
+#define AHC_RUN_TQINFIFO 0x2
+static u_int
+ahc_check_cmdcmpltqueues(struct ahc_softc *ahc)
+{
+	u_int retval;
+
+	retval = 0;
+	ahc_dmamap_sync(ahc, ahc->shared_data_dmat, ahc->shared_data_dmamap,
+			/*offset*/ahc->qoutfifonext, /*len*/1,
+			BUS_DMASYNC_POSTREAD);
+	if (ahc->qoutfifo[ahc->qoutfifonext] != SCB_LIST_NULL)
+		retval |= AHC_RUN_QOUTFIFO;
+#ifdef AHC_TARGET_MODE
+	if ((ahc->flags & AHC_TARGETROLE) != 0
+	 && (ahc->flags & AHC_TQINFIFO_BLOCKED) == 0) {
+		ahc_dmamap_sync(ahc, ahc->shared_data_dmat,
+				ahc->shared_data_dmamap,
+				ahc_targetcmd_offset(ahc, ahc->tqinfifofnext),
+				/*len*/sizeof(struct target_cmd),
+				BUS_DMASYNC_POSTREAD);
+		if (ahc->targetcmds[ahc->tqinfifonext].cmd_valid != 0)
+			retval |= AHC_RUN_TQINFIFO;
+	}
+#endif
+	return (retval);
+}
+
+/*
+ * Catch an interrupt from the adapter
+ */
+int
+ahc_intr(struct ahc_softc *ahc)
+{
+	u_int	intstat;
+
+	if ((ahc->pause & INTEN) == 0) {
+		/*
+		 * Our interrupt is not enabled on the chip
+		 * and may be disabled for re-entrancy reasons,
+		 * so just return.  This is likely just a shared
+		 * interrupt.
+		 */
+		return (0);
+	}
+	/*
+	 * Instead of directly reading the interrupt status register,
+	 * infer the cause of the interrupt by checking our in-core
+	 * completion queues.  This avoids a costly PCI bus read in
+	 * most cases.
+	 */
+	if ((ahc->flags & (AHC_ALL_INTERRUPTS|AHC_EDGE_INTERRUPT)) == 0
+	 && (ahc_check_cmdcmpltqueues(ahc) != 0))
+		intstat = CMDCMPLT;
+	else {
+		intstat = ahc_inb(ahc, INTSTAT);
+	}
+
+	if ((intstat & INT_PEND) == 0) {
+#if AHC_PCI_CONFIG > 0
+		if (ahc->unsolicited_ints > 500) {
+			ahc->unsolicited_ints = 0;
+			if ((ahc->chip & AHC_PCI) != 0
+			 && (ahc_inb(ahc, ERROR) & PCIERRSTAT) != 0)
+				ahc->bus_intr(ahc);
+		}
+#endif
+		ahc->unsolicited_ints++;
+		return (0);
+	}
+	ahc->unsolicited_ints = 0;
+
+	if (intstat & CMDCMPLT) {
+		ahc_outb(ahc, CLRINT, CLRCMDINT);
+
+		/*
+		 * Ensure that the chip sees that we've cleared
+		 * this interrupt before we walk the output fifo.
+		 * Otherwise, we may, due to posted bus writes,
+		 * clear the interrupt after we finish the scan,
+		 * and after the sequencer has added new entries
+		 * and asserted the interrupt again.
+		 */
+		ahc_flush_device_writes(ahc);
+		ahc_run_qoutfifo(ahc);
+#ifdef AHC_TARGET_MODE
+		if ((ahc->flags & AHC_TARGETROLE) != 0)
+			ahc_run_tqinfifo(ahc, /*paused*/FALSE);
+#endif
+	}
+
+	/*
+	 * Handle statuses that may invalidate our cached
+	 * copy of INTSTAT separately.
+	 */
+	if (intstat == 0xFF && (ahc->features & AHC_REMOVABLE) != 0) {
+		/* Hot eject.  Do nothing */
+	} else if (intstat & BRKADRINT) {
+		ahc_handle_brkadrint(ahc);
+	} else if ((intstat & (SEQINT|SCSIINT)) != 0) {
+
+		ahc_pause_bug_fix(ahc);
+
+		if ((intstat & SEQINT) != 0)
+			ahc_handle_seqint(ahc, intstat);
+
+		if ((intstat & SCSIINT) != 0)
+			ahc_handle_scsiint(ahc, intstat);
+	}
+	return (1);
+}
 
 /***************************** Lookup Tables **********************************/
 char *ahc_chip_names[] =
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic7xxx_inline.c linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic7xxx_inline.c
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic7xxx_inline.c	Tue Apr 11 09:44:03 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic7xxx_inline.c	Thu Jan  1 03:00:00 1970
@@ -1,311 +0,0 @@
-/*
- * Routines shareable across OS platforms.
- *
- * Formerly inlined routines from aic7xxx_inline.h are moved here.
- * This file is #included into aic7xxx_core.c
- */
-
-/*********************** Miscelaneous Support Functions ***********************/
-uint16_t
-ahc_inw(struct ahc_softc *ahc, u_int port)
-{
-	return ((ahc_inb(ahc, port+1) << 8) | ahc_inb(ahc, port));
-}
-
-void
-ahc_outw(struct ahc_softc *ahc, u_int port, u_int value)
-{
-	ahc_outb(ahc, port, value & 0xFF);
-	ahc_outb(ahc, port+1, (value >> 8) & 0xFF);
-}
-
-uint32_t
-ahc_inl(struct ahc_softc *ahc, u_int port)
-{
-	return ((ahc_inb(ahc, port))
-	      | (ahc_inb(ahc, port+1) << 8)
-	      | (ahc_inb(ahc, port+2) << 16)
-	      | (ahc_inb(ahc, port+3) << 24));
-}
-
-void
-ahc_outl(struct ahc_softc *ahc, u_int port, uint32_t value)
-{
-	ahc_outb(ahc, port, (value) & 0xFF);
-	ahc_outb(ahc, port+1, ((value) >> 8) & 0xFF);
-	ahc_outb(ahc, port+2, ((value) >> 16) & 0xFF);
-	ahc_outb(ahc, port+3, ((value) >> 24) & 0xFF);
-}
-
-uint64_t
-ahc_inq(struct ahc_softc *ahc, u_int port)
-{
-	return ((ahc_inb(ahc, port))
-	      | (ahc_inb(ahc, port+1) << 8)
-	      | (ahc_inb(ahc, port+2) << 16)
-	      | (ahc_inb(ahc, port+3) << 24)
-	      | (((uint64_t)ahc_inb(ahc, port+4)) << 32)
-	      | (((uint64_t)ahc_inb(ahc, port+5)) << 40)
-	      | (((uint64_t)ahc_inb(ahc, port+6)) << 48)
-	      | (((uint64_t)ahc_inb(ahc, port+7)) << 56));
-}
-
-void
-ahc_outq(struct ahc_softc *ahc, u_int port, uint64_t value)
-{
-	ahc_outb(ahc, port, value & 0xFF);
-	ahc_outb(ahc, port+1, (value >> 8) & 0xFF);
-	ahc_outb(ahc, port+2, (value >> 16) & 0xFF);
-	ahc_outb(ahc, port+3, (value >> 24) & 0xFF);
-	ahc_outb(ahc, port+4, (value >> 32) & 0xFF);
-	ahc_outb(ahc, port+5, (value >> 40) & 0xFF);
-	ahc_outb(ahc, port+6, (value >> 48) & 0xFF);
-	ahc_outb(ahc, port+7, (value >> 56) & 0xFF);
-}
-
-/*
- * Get a free scb. If there are none, see if we can allocate a new SCB.
- */
-struct scb *
-ahc_get_scb(struct ahc_softc *ahc)
-{
-	struct scb *scb;
-
-	if ((scb = SLIST_FIRST(&ahc->scb_data->free_scbs)) == NULL) {
-		ahc_alloc_scbs(ahc);
-		scb = SLIST_FIRST(&ahc->scb_data->free_scbs);
-		if (scb == NULL)
-			return (NULL);
-	}
-	SLIST_REMOVE_HEAD(&ahc->scb_data->free_scbs, links.sle);
-	return (scb);
-}
-
-/*
- * Return an SCB resource to the free list.
- */
-void
-ahc_free_scb(struct ahc_softc *ahc, struct scb *scb)
-{
-	struct hardware_scb *hscb;
-
-	hscb = scb->hscb;
-	/* Clean up for the next user */
-	ahc->scb_data->scbindex[hscb->tag] = NULL;
-	scb->flags = SCB_FREE;
-	hscb->control = 0;
-
-	SLIST_INSERT_HEAD(&ahc->scb_data->free_scbs, scb, links.sle);
-
-	/* Notify the OSM that a resource is now available. */
-	ahc_platform_scb_free(ahc, scb);
-}
-
-struct scb *
-ahc_lookup_scb(struct ahc_softc *ahc, u_int tag)
-{
-	struct scb* scb;
-
-	scb = ahc->scb_data->scbindex[tag];
-	if (scb != NULL)
-		ahc_sync_scb(ahc, scb,
-			     BUS_DMASYNC_POSTREAD|BUS_DMASYNC_POSTWRITE);
-	return (scb);
-}
-
-void
-ahc_swap_with_next_hscb(struct ahc_softc *ahc, struct scb *scb)
-{
-	struct hardware_scb *q_hscb;
-	u_int  saved_tag;
-
-	/*
-	 * Our queuing method is a bit tricky.  The card
-	 * knows in advance which HSCB to download, and we
-	 * can't disappoint it.  To achieve this, the next
-	 * SCB to download is saved off in ahc->next_queued_scb.
-	 * When we are called to queue "an arbitrary scb",
-	 * we copy the contents of the incoming HSCB to the one
-	 * the sequencer knows about, swap HSCB pointers and
-	 * finally assign the SCB to the tag indexed location
-	 * in the scb_array.  This makes sure that we can still
-	 * locate the correct SCB by SCB_TAG.
-	 */
-	q_hscb = ahc->next_queued_scb->hscb;
-	saved_tag = q_hscb->tag;
-	memcpy(q_hscb, scb->hscb, sizeof(*scb->hscb));
-	if ((scb->flags & SCB_CDB32_PTR) != 0) {
-		q_hscb->shared_data.cdb_ptr =
-		    ahc_htole32(ahc_hscb_busaddr(ahc, q_hscb->tag)
-			      + offsetof(struct hardware_scb, cdb32));
-	}
-	q_hscb->tag = saved_tag;
-	q_hscb->next = scb->hscb->tag;
-
-	/* Now swap HSCB pointers. */
-	ahc->next_queued_scb->hscb = scb->hscb;
-	scb->hscb = q_hscb;
-
-	/* Now define the mapping from tag to SCB in the scbindex */
-	ahc->scb_data->scbindex[scb->hscb->tag] = scb;
-}
-
-/*
- * Tell the sequencer about a new transaction to execute.
- */
-void
-ahc_queue_scb(struct ahc_softc *ahc, struct scb *scb)
-{
-	ahc_swap_with_next_hscb(ahc, scb);
-
-	if (scb->hscb->tag == SCB_LIST_NULL
-	 || scb->hscb->next == SCB_LIST_NULL)
-		panic("Attempt to queue invalid SCB tag %x:%x\n",
-		      scb->hscb->tag, scb->hscb->next);
-
-	/*
-	 * Setup data "oddness".
-	 */
-	scb->hscb->lun &= LID;
-	if (ahc_get_transfer_length(scb) & 0x1)
-		scb->hscb->lun |= SCB_XFERLEN_ODD;
-
-	/*
-	 * Keep a history of SCBs we've downloaded in the qinfifo.
-	 */
-	ahc->qinfifo[ahc->qinfifonext++] = scb->hscb->tag;
-
-	/*
-	 * Make sure our data is consistent from the
-	 * perspective of the adapter.
-	 */
-	ahc_sync_scb(ahc, scb, BUS_DMASYNC_PREREAD|BUS_DMASYNC_PREWRITE);
-
-	/* Tell the adapter about the newly queued SCB */
-	if ((ahc->features & AHC_QUEUE_REGS) != 0) {
-		ahc_outb(ahc, HNSCB_QOFF, ahc->qinfifonext);
-	} else {
-		if ((ahc->features & AHC_AUTOPAUSE) == 0)
-			ahc_pause(ahc);
-		ahc_outb(ahc, KERNEL_QINPOS, ahc->qinfifonext);
-		if ((ahc->features & AHC_AUTOPAUSE) == 0)
-			ahc_unpause(ahc);
-	}
-}
-
-/************************** Interrupt Processing ******************************/
-/*
- * See if the firmware has posted any completed commands
- * into our in-core command complete fifos.
- */
-#define AHC_RUN_QOUTFIFO 0x1
-#define AHC_RUN_TQINFIFO 0x2
-u_int
-ahc_check_cmdcmpltqueues(struct ahc_softc *ahc)
-{
-	u_int retval;
-
-	retval = 0;
-	ahc_dmamap_sync(ahc, ahc->shared_data_dmat, ahc->shared_data_dmamap,
-			/*offset*/ahc->qoutfifonext, /*len*/1,
-			BUS_DMASYNC_POSTREAD);
-	if (ahc->qoutfifo[ahc->qoutfifonext] != SCB_LIST_NULL)
-		retval |= AHC_RUN_QOUTFIFO;
-#ifdef AHC_TARGET_MODE
-	if ((ahc->flags & AHC_TARGETROLE) != 0
-	 && (ahc->flags & AHC_TQINFIFO_BLOCKED) == 0) {
-		ahc_dmamap_sync(ahc, ahc->shared_data_dmat,
-				ahc->shared_data_dmamap,
-				ahc_targetcmd_offset(ahc, ahc->tqinfifofnext),
-				/*len*/sizeof(struct target_cmd),
-				BUS_DMASYNC_POSTREAD);
-		if (ahc->targetcmds[ahc->tqinfifonext].cmd_valid != 0)
-			retval |= AHC_RUN_TQINFIFO;
-	}
-#endif
-	return (retval);
-}
-
-/*
- * Catch an interrupt from the adapter
- */
-int
-ahc_intr(struct ahc_softc *ahc)
-{
-	u_int	intstat;
-
-	if ((ahc->pause & INTEN) == 0) {
-		/*
-		 * Our interrupt is not enabled on the chip
-		 * and may be disabled for re-entrancy reasons,
-		 * so just return.  This is likely just a shared
-		 * interrupt.
-		 */
-		return (0);
-	}
-	/*
-	 * Instead of directly reading the interrupt status register,
-	 * infer the cause of the interrupt by checking our in-core
-	 * completion queues.  This avoids a costly PCI bus read in
-	 * most cases.
-	 */
-	if ((ahc->flags & (AHC_ALL_INTERRUPTS|AHC_EDGE_INTERRUPT)) == 0
-	 && (ahc_check_cmdcmpltqueues(ahc) != 0))
-		intstat = CMDCMPLT;
-	else {
-		intstat = ahc_inb(ahc, INTSTAT);
-	}
-
-	if ((intstat & INT_PEND) == 0) {
-#if AHC_PCI_CONFIG > 0
-		if (ahc->unsolicited_ints > 500) {
-			ahc->unsolicited_ints = 0;
-			if ((ahc->chip & AHC_PCI) != 0
-			 && (ahc_inb(ahc, ERROR) & PCIERRSTAT) != 0)
-				ahc->bus_intr(ahc);
-		}
-#endif
-		ahc->unsolicited_ints++;
-		return (0);
-	}
-	ahc->unsolicited_ints = 0;
-
-	if (intstat & CMDCMPLT) {
-		ahc_outb(ahc, CLRINT, CLRCMDINT);
-
-		/*
-		 * Ensure that the chip sees that we've cleared
-		 * this interrupt before we walk the output fifo.
-		 * Otherwise, we may, due to posted bus writes,
-		 * clear the interrupt after we finish the scan,
-		 * and after the sequencer has added new entries
-		 * and asserted the interrupt again.
-		 */
-		ahc_flush_device_writes(ahc);
-		ahc_run_qoutfifo(ahc);
-#ifdef AHC_TARGET_MODE
-		if ((ahc->flags & AHC_TARGETROLE) != 0)
-			ahc_run_tqinfifo(ahc, /*paused*/FALSE);
-#endif
-	}
-
-	/*
-	 * Handle statuses that may invalidate our cached
-	 * copy of INTSTAT separately.
-	 */
-	if (intstat == 0xFF && (ahc->features & AHC_REMOVABLE) != 0) {
-		/* Hot eject.  Do nothing */
-	} else if (intstat & BRKADRINT) {
-		ahc_handle_brkadrint(ahc);
-	} else if ((intstat & (SEQINT|SCSIINT)) != 0) {
-
-		ahc_pause_bug_fix(ahc);
-
-		if ((intstat & SEQINT) != 0)
-			ahc_handle_seqint(ahc, intstat);
-
-		if ((intstat & SCSIINT) != 0)
-			ahc_handle_scsiint(ahc, intstat);
-	}
-	return (1);
-}
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic7xxx_inline.h linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic7xxx_inline.h
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic7xxx_inline.h	Tue Apr 11 09:44:03 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic7xxx_inline.h	Tue Apr 11 09:46:50 2006
@@ -249,8 +249,6 @@ struct scb*
 void	ahc_free_scb(struct ahc_softc *ahc, struct scb *scb);
 struct scb *
 	ahc_lookup_scb(struct ahc_softc *ahc, u_int tag);
-void	ahc_swap_with_next_hscb(struct ahc_softc *ahc,
-						struct scb *scb);
 void	ahc_queue_scb(struct ahc_softc *ahc, struct scb *scb);
 static __inline struct scsi_sense_data *
 			ahc_get_sense_buf(struct ahc_softc *ahc,
@@ -315,7 +313,6 @@ ahc_get_sense_bufaddr(struct ahc_softc *
 /************************** Interrupt Processing ******************************/
 static __inline void	ahc_sync_qoutfifo(struct ahc_softc *ahc, int op);
 static __inline void	ahc_sync_tqinfifo(struct ahc_softc *ahc, int op);
-u_int	ahc_check_cmdcmpltqueues(struct ahc_softc *ahc);
 int	ahc_intr(struct ahc_softc *ahc);
 
 static __inline void
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic7xxx_osm.h linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic7xxx_osm.h
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic7xxx_osm.h	Tue Apr 11 09:44:03 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic7xxx_osm.h	Tue Apr 11 09:46:50 2006
@@ -387,7 +387,10 @@ struct ahc_platform_data {
 #define malloc(size, type, flags) kmalloc(size, flags)
 #define free(ptr, type) kfree(ptr)
 
-void ahc_delay(long);
+static inline void ahc_delay(int usec)
+{
+	udelay(usec);
+}
 
 /***************************** Low Level I/O **********************************/
 uint8_t ahc_inb(struct ahc_softc * ahc, long port);
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic7xxx_osm_o.c linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic7xxx_osm_o.c
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic7xxx_osm_o.c	Tue Apr 11 09:44:03 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic7xxx_osm_o.c	Thu Jan  1 03:00:00 1970
@@ -1,75 +0,0 @@
-/*
- * Adaptec AIC7xxx device driver for Linux.
- *
- * Formerly inlined routines from aic7xxx_osm.h are moved here.
- * This file is #included into aic7xxx_core.c
- */
-
-/************************** OS Utility Wrappers *******************************/
-void
-ahc_delay(long usec)
-{
-	/*
-	 * udelay on Linux can have problems for
-	 * multi-millisecond waits.  Wait at most
-	 * 1024us per call.
-	 */
-	while (usec > 0) {
-		udelay(usec % 1024);
-		usec -= 1024;
-	}
-}
-
-/***************************** Low Level I/O **********************************/
-uint8_t
-ahc_inb(struct ahc_softc * ahc, long port)
-{
-	uint8_t x;
-
-	if (ahc->tag == BUS_SPACE_MEMIO) {
-		x = readb(ahc->bsh.maddr + port);
-	} else {
-		x = inb(ahc->bsh.ioport + port);
-	}
-	mb();
-	return (x);
-}
-
-void
-ahc_outb(struct ahc_softc * ahc, long port, uint8_t val)
-{
-	if (ahc->tag == BUS_SPACE_MEMIO) {
-		writeb(val, ahc->bsh.maddr + port);
-	} else {
-		outb(val, ahc->bsh.ioport + port);
-	}
-	mb();
-}
-
-void
-ahc_outsb(struct ahc_softc * ahc, long port, uint8_t *array, int count)
-{
-	int i;
-
-	/*
-	 * There is probably a more efficient way to do this on Linux
-	 * but we don't use this for anything speed critical and this
-	 * should work.
-	 */
-	for (i = 0; i < count; i++)
-		ahc_outb(ahc, port, *array++);
-}
-
-void
-ahc_insb(struct ahc_softc * ahc, long port, uint8_t *array, int count)
-{
-	int i;
-
-	/*
-	 * There is probably a more efficient way to do this on Linux
-	 * but we don't use this for anything speed critical and this
-	 * should work.
-	 */
-	for (i = 0; i < count; i++)
-		*array++ = ahc_inb(ahc, port);
-}
diff -urpN linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic7xxx_pci.c linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic7xxx_pci.c
--- linux-2.6.16.aic_apkm/drivers/scsi/aic7xxx/aic7xxx_pci.c	Mon Mar 20 07:53:29 2006
+++ linux-2.6.16.aic_vda/drivers/scsi/aic7xxx/aic7xxx_pci.c	Tue Apr 11 09:46:49 2006
@@ -2036,12 +2036,12 @@ ahc_pci_resume(struct ahc_softc *ahc)
 	 * that the OS doesn't know about and rely on our chip
 	 * reset handler to handle the rest.
 	 */
-	ahc_pci_write_config(ahc->dev_softc, DEVCONFIG, /*bytes*/4,
-			     ahc->bus_softc.pci_softc.devconfig);
-	ahc_pci_write_config(ahc->dev_softc, PCIR_COMMAND, /*bytes*/1,
-			     ahc->bus_softc.pci_softc.command);
-	ahc_pci_write_config(ahc->dev_softc, CSIZE_LATTIME, /*bytes*/1,
-			     ahc->bus_softc.pci_softc.csize_lattime);
+	ahc_pci_write_config(ahc->dev_softc, DEVCONFIG,
+			     ahc->bus_softc.pci_softc.devconfig, /*bytes*/4);
+	ahc_pci_write_config(ahc->dev_softc, PCIR_COMMAND,
+			     ahc->bus_softc.pci_softc.command, /*bytes*/1);
+	ahc_pci_write_config(ahc->dev_softc, CSIZE_LATTIME,
+			     ahc->bus_softc.pci_softc.csize_lattime, /*bytes*/1);
 	if ((ahc->flags & AHC_HAS_TERM_LOGIC) != 0) {
 		struct	seeprom_descriptor sd;
 		u_int	sxfrctl1;

             reply	other threads:[~2006-04-11  7:04 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-04-11  7:04 Denis Vlasenko [this message]
2006-04-11  7:06 ` [PATCH] cleanup after deinlining patch 1/2 Denis Vlasenko
2006-04-11  7:13 ` Denis Vlasenko
2006-04-11 21:21   ` Andrew Morton
2006-04-12  8:16     ` Denis Vlasenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=200604111004.40339.vda@ilport.com.ua \
    --to=vda@ilport.com.ua \
    --cc=akpm@osdl.org \
    --cc=arjan@infradead.org \
    --cc=eike-kernel@sf-tec.de \
    --cc=gibbs@scsiguy.com \
    --cc=hare@suse.de \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=stefanr@s5r6.in-berlin.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.