[PATCH] typo: buad -> baud - Horst Schirmeier

All of lore.kernel.org
 help / color / mirror / Atom feed

From: Horst Schirmeier <horst@schirmeier.com>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-kernel@vger.kernel.org, trivial@kernel.org
Subject: [PATCH] typo: buad -> baud
Date: Thu, 13 Apr 2006 13:37:51 +0200	[thread overview]
Message-ID: <20060413113751.GK2335@quickstop.soohrt.org> (raw)

Replacing mistyped "buad" with "baud" where applicable.

Signed-off-by: Horst Schirmeier <horst@schirmeier.com>

---

 arch/mips/ddb5xxx/ddb5476/dbg_io.c        |    2 +-
 arch/mips/ddb5xxx/ddb5477/kgdb_io.c       |    2 +-
 arch/mips/gt64120/ev64120/serialGT.c      |    2 +-
 arch/mips/gt64120/momenco_ocelot/dbg_io.c |    2 +-
 arch/mips/ite-boards/generic/dbg_io.c     |    2 +-
 arch/mips/momentum/jaguar_atx/dbg_io.c    |    2 +-
 arch/mips/momentum/ocelot_c/dbg_io.c      |    2 +-
 arch/mips/momentum/ocelot_g/dbg_io.c      |    2 +-
 include/asm-arm/arch-l7200/serial_l7200.h |    2 +-
 include/asm-arm/arch-l7200/uncompress.h   |    2 +-
 10 files changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/mips/ddb5xxx/ddb5476/dbg_io.c b/arch/mips/ddb5xxx/ddb5476/dbg_io.c
index 85e9e50..f2296a9 100644
--- a/arch/mips/ddb5xxx/ddb5476/dbg_io.c
+++ b/arch/mips/ddb5xxx/ddb5476/dbg_io.c
@@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data, 
         /* disable interrupts */
         UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-        /* set up buad rate */
+        /* set up baud rate */
         {
                 uint32 divisor;
 
diff --git a/arch/mips/ddb5xxx/ddb5477/kgdb_io.c b/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
index 1d18d59..385bbdb 100644
--- a/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
+++ b/arch/mips/ddb5xxx/ddb5477/kgdb_io.c
@@ -86,7 +86,7 @@ void debugInit(uint32 baud, uint8 data, 
         /* disable interrupts */
         UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-        /* set up buad rate */
+        /* set up baud rate */
         {
                 uint32 divisor;
 
diff --git a/arch/mips/gt64120/ev64120/serialGT.c b/arch/mips/gt64120/ev64120/serialGT.c
index 16e34a5..8f0d835 100644
--- a/arch/mips/gt64120/ev64120/serialGT.c
+++ b/arch/mips/gt64120/ev64120/serialGT.c
@@ -149,7 +149,7 @@ void serial_set(int channel, unsigned lo
 #else
 	/*
 	 * Note: Set baud rate, hardcoded here for rate of 115200
-	 * since became unsure of above "buad rate" algorithm (??).
+	 * since became unsure of above "baud rate" algorithm (??).
 	 */
 	outreg(channel, LCR, 0x83);
 	outreg(channel, DLM, 0x00);	// See note above
diff --git a/arch/mips/gt64120/momenco_ocelot/dbg_io.c b/arch/mips/gt64120/momenco_ocelot/dbg_io.c
index 8720bcc..f0a6a38 100644
--- a/arch/mips/gt64120/momenco_ocelot/dbg_io.c
+++ b/arch/mips/gt64120/momenco_ocelot/dbg_io.c
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, 
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 
diff --git a/arch/mips/ite-boards/generic/dbg_io.c b/arch/mips/ite-boards/generic/dbg_io.c
index c4f8530..6a7ccaf 100644
--- a/arch/mips/ite-boards/generic/dbg_io.c
+++ b/arch/mips/ite-boards/generic/dbg_io.c
@@ -72,7 +72,7 @@ void debugInit(uint32 baud, uint8 data, 
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 
diff --git a/arch/mips/momentum/jaguar_atx/dbg_io.c b/arch/mips/momentum/jaguar_atx/dbg_io.c
index 542eac8..d7dea0a 100644
--- a/arch/mips/momentum/jaguar_atx/dbg_io.c
+++ b/arch/mips/momentum/jaguar_atx/dbg_io.c
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, 
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 
diff --git a/arch/mips/momentum/ocelot_c/dbg_io.c b/arch/mips/momentum/ocelot_c/dbg_io.c
index 8720bcc..f0a6a38 100644
--- a/arch/mips/momentum/ocelot_c/dbg_io.c
+++ b/arch/mips/momentum/ocelot_c/dbg_io.c
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, 
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 
diff --git a/arch/mips/momentum/ocelot_g/dbg_io.c b/arch/mips/momentum/ocelot_g/dbg_io.c
index 8720bcc..f0a6a38 100644
--- a/arch/mips/momentum/ocelot_g/dbg_io.c
+++ b/arch/mips/momentum/ocelot_g/dbg_io.c
@@ -73,7 +73,7 @@ void debugInit(uint32 baud, uint8 data, 
 	/* disable interrupts */
 	UART16550_WRITE(OFS_INTR_ENABLE, 0);
 
-	/* set up buad rate */
+	/* set up baud rate */
 	{
 		uint32 divisor;
 
diff --git a/include/asm-arm/arch-l7200/serial_l7200.h b/include/asm-arm/arch-l7200/serial_l7200.h
index 238c595..b1008a9 100644
--- a/include/asm-arm/arch-l7200/serial_l7200.h
+++ b/include/asm-arm/arch-l7200/serial_l7200.h
@@ -28,7 +28,7 @@
 #define UARTDR			0x00	/* Tx/Rx data */
 #define RXSTAT			0x04	/* Rx status */
 #define H_UBRLCR		0x08	/* mode register high */
-#define M_UBRLCR		0x0C	/* mode reg mid (MSB of buad)*/
+#define M_UBRLCR		0x0C	/* mode reg mid (MSB of baud)*/
 #define L_UBRLCR		0x10	/* mode reg low (LSB of baud)*/
 #define UARTCON			0x14	/* control register */
 #define UARTFLG			0x18	/* flag register */
diff --git a/include/asm-arm/arch-l7200/uncompress.h b/include/asm-arm/arch-l7200/uncompress.h
index 9fcd40a..04be2a0 100644
--- a/include/asm-arm/arch-l7200/uncompress.h
+++ b/include/asm-arm/arch-l7200/uncompress.h
@@ -6,7 +6,7 @@
  * Changelog:
  *  05-01-2000	SJH	Created
  *  05-13-2000	SJH	Filled in function bodies
- *  07-26-2000	SJH	Removed hard coded buad rate
+ *  07-26-2000	SJH	Removed hard coded baud rate
  */
 
 #include <asm/hardware.h>

-- 
PGP-Key 0xD40E0E7A

next             reply	other threads:[~2006-04-13 11:37 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-04-13 11:37 Horst Schirmeier [this message]
2006-06-05  9:46 ` [PATCH] typo: buad -> baud Russell King

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:85e9e50 dfblob:f2296a9 dfblob:1d18d59 dfblob:385bbdb
dfblob:16e34a5 dfblob:8f0d835 dfblob:8720bcc dfblob:f0a6a38
dfblob:c4f8530 dfblob:6a7ccaf dfblob:542eac8 dfblob:d7dea0a
dfblob:8720bcc dfblob:f0a6a38 dfblob:8720bcc dfblob:f0a6a38
dfblob:238c595 dfblob:b1008a9 dfblob:9fcd40a dfblob:04be2a0 )
 OR (
bs:"[PATCH] typo: buad -> baud" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20060413113751.GK2335@quickstop.soohrt.org \
    --to=horst@schirmeier.com \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=trivial@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.