From mboxrd@z Thu Jan 1 00:00:00 1970 From: Axel.Thimm@ATrpms.net (Axel Thimm) Date: Sat, 15 Apr 2006 12:41:25 +0000 Subject: [lm-sensors] lm87 support on Centos 4.3 (kernel 2.6.9-34.EL) Message-Id: <20060415124125.GC26024@neu.nirvana> List-Id: References: <443C3FF8.9080002@sedonanetworks.com> In-Reply-To: <443C3FF8.9080002@sedonanetworks.com> MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: lm-sensors@vger.kernel.org On Thu, Apr 13, 2006 at 07:01:56PM +0200, Rudolf Marek wrote: > Doug - Sedona Networks wrote: > > I'm using Centos 4.3 and appears from your website that support > > for the lm87 chip used on the Suppermicro P3TDEi mb's is only > > available from kernel 2.6.10 and Centos is currently using > > 2.6.9-34. > > > Any other suggestions other than rebuilding the kernel? > > No sorry. > > Oh exept one. You can try to build the kernel outside the kernel tree. But his implies > you can run make modules_prepare in in the 2.6.9 kernel and you must have proper > configuration file (.config) installed. I thought out-of-tree builds were not supported anymore for 2.6 kernels. If they are I could pick them up again and create rpms for them (kmdls) like for the 2.4 kernels. That would solve Doug's issue, too, as I package for RHEL4, too. -- Axel.Thimm at ATrpms.net -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 189 bytes Desc: not available Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20060415/ef1f5891/attachment.bin