From: Jack Steiner <steiner@sgi.com>
To: Mel Gorman <mel@csn.ul.ie>
Cc: davej@codemonkey.org.uk, tony.luck@intel.com, linux-mm@kvack.org,
ak@suse.de, bob.picco@hp.com, linux-kernel@vger.kernel.org,
linuxppc-dev@ozlabs.org
Subject: Re: [PATCH 0/7] [RFC] Sizing zones and holes in an architecture independent manner V3
Date: Tue, 18 Apr 2006 14:56:45 -0500 [thread overview]
Message-ID: <20060418195644.GA30911@sgi.com> (raw)
In-Reply-To: <20060418130015.28928.10163.sendpatchset@skynet>
On Tue, Apr 18, 2006 at 02:00:15PM +0100, Mel Gorman wrote:
> This is V3 of the patchset to size zones and memory holes in an
...
FYI, I applied the patches to a recent kernel & booted on a large
SGI system. No problem aside from what I assume is a very large number
of debug messages.
------
Linux version 2.6.17-tony (steiner@attica) (gcc version 4.1.0 (SUSE Linux)) #5 SMP PREEMPT Tue Apr 18 14:01:54 CDT 2006
EFI v1.10 by INTEL: SALsystab=0x6002c51df0 ACPI 2.0=0x6002c51ee0
Number of logical nodes in system = 512
Number of memory chunks in system = 512
SAL 2.9: SGI SN2 version 1.10
SAL Platform features: ITC_Drift
SAL: AP wakeup using external interrupt vector 0x12
No logical to physical processor mapping available
ACPI: Local APIC address c0000000fee00000
ACPI: Error parsing MADT - no IOSAPIC entries
register_intr: No IOSAPIC for GSI 52
512 CPUs available, 512 CPUs total
MCA related initialization done
SGI SAL version 1.10
add_active_range(0, 25168900, 25235456): New
add_active_range(0, 25236375, 25419776): New
add_active_range(0, 27262976, 27516927): New
add_active_range(0, 29360128, 29614080): New
add_active_range(1, 92277760, 92528640): New
...
add_active_range(511, 34322242024, 34322242047): New
add_active_range(511, 34322243072, 34322243417): New
add_active_range(511, 34322243432, 34322243460): New
add_active_range(511, 34322243488, 34322243500): New
Virtual mem_map starts at 0xa0007e407d270000
free_area_init_nodes(68719476736, 68719476736, 34322243584, 34322243584)
free_area_init_nodes(): find_min_pfn = 25168900
Dumping sorted node map
entry 0: 0 25168900 -> 25235456
entry 1: 0 25236375 -> 25419776
entry 2: 0 27262976 -> 27516927
entry 3: 0 29360128 -> 29614080
entry 4: 1 92277760 -> 92528640
entry 5: 1 94371840 -> 94625792
entry 6: 1 96468992 -> 96722944
...
entry 1536: 511 34321989632 -> 34322242001
entry 1537: 511 34322242016 -> 34322242022
entry 1538: 511 34322242024 -> 34322242047
entry 1539: 511 34322243072 -> 34322243417
entry 1540: 511 34322243432 -> 34322243460
entry 1541: 511 34322243488 -> 34322243500
__absent_pages_in_range(0, 25168900, 68719476736) = 3687320
__absent_pages_in_range(0, 68719476736, 68719476736) = 0
__absent_pages_in_range(0, 68719476736, 34322243584) = 0
__absent_pages_in_range(0, 34322243584, 34322243584) = 0
__absent_pages_in_range(0, 25168900, 68719476736) = 3687320
...
__absent_pages_in_range(511, 34322243584, 34322243584) = 0
__absent_pages_in_range(511, 25168900, 68719476736) = 3687485
__absent_pages_in_range(511, 68719476736, 68719476736) = 0
__absent_pages_in_range(511, 68719476736, 34322243584) = 0
__absent_pages_in_range(511, 34322243584, 34322243584) = 0
Built 512 zonelists
Kernel command line: BOOT_IMAGE=net0:jfs/tonys ro hashdist=1 dhash_entries=2097152 ihash_entries=2097152 rhash_entries=2097152 thash_entries=2097152 console=ttySG0,38400n8 kdb=on noprobe root=/dev/sda5
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour dummy device 80x25
Memory: 4639378784k/4655642784k available (7021k code, 16279040k reserved, 4361k data, 736k init)
(essentially the same numbers as with a kernel w/o the patches)
McKinley Errata 9 workaround not needed; disabling it
WARNING: multiple messages have this Message-ID (diff)
From: Jack Steiner <steiner@sgi.com>
To: Mel Gorman <mel@csn.ul.ie>
Cc: davej@codemonkey.org.uk, tony.luck@intel.com,
linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org,
bob.picco@hp.com, ak@suse.de, linux-mm@kvack.org
Subject: Re: [PATCH 0/7] [RFC] Sizing zones and holes in an architecture independent manner V3
Date: Tue, 18 Apr 2006 14:56:45 -0500 [thread overview]
Message-ID: <20060418195644.GA30911@sgi.com> (raw)
In-Reply-To: <20060418130015.28928.10163.sendpatchset@skynet>
On Tue, Apr 18, 2006 at 02:00:15PM +0100, Mel Gorman wrote:
> This is V3 of the patchset to size zones and memory holes in an
...
FYI, I applied the patches to a recent kernel & booted on a large
SGI system. No problem aside from what I assume is a very large number
of debug messages.
------
Linux version 2.6.17-tony (steiner@attica) (gcc version 4.1.0 (SUSE Linux)) #5 SMP PREEMPT Tue Apr 18 14:01:54 CDT 2006
EFI v1.10 by INTEL: SALsystab=0x6002c51df0 ACPI 2.0=0x6002c51ee0
Number of logical nodes in system = 512
Number of memory chunks in system = 512
SAL 2.9: SGI SN2 version 1.10
SAL Platform features: ITC_Drift
SAL: AP wakeup using external interrupt vector 0x12
No logical to physical processor mapping available
ACPI: Local APIC address c0000000fee00000
ACPI: Error parsing MADT - no IOSAPIC entries
register_intr: No IOSAPIC for GSI 52
512 CPUs available, 512 CPUs total
MCA related initialization done
SGI SAL version 1.10
add_active_range(0, 25168900, 25235456): New
add_active_range(0, 25236375, 25419776): New
add_active_range(0, 27262976, 27516927): New
add_active_range(0, 29360128, 29614080): New
add_active_range(1, 92277760, 92528640): New
...
add_active_range(511, 34322242024, 34322242047): New
add_active_range(511, 34322243072, 34322243417): New
add_active_range(511, 34322243432, 34322243460): New
add_active_range(511, 34322243488, 34322243500): New
Virtual mem_map starts at 0xa0007e407d270000
free_area_init_nodes(68719476736, 68719476736, 34322243584, 34322243584)
free_area_init_nodes(): find_min_pfn = 25168900
Dumping sorted node map
entry 0: 0 25168900 -> 25235456
entry 1: 0 25236375 -> 25419776
entry 2: 0 27262976 -> 27516927
entry 3: 0 29360128 -> 29614080
entry 4: 1 92277760 -> 92528640
entry 5: 1 94371840 -> 94625792
entry 6: 1 96468992 -> 96722944
...
entry 1536: 511 34321989632 -> 34322242001
entry 1537: 511 34322242016 -> 34322242022
entry 1538: 511 34322242024 -> 34322242047
entry 1539: 511 34322243072 -> 34322243417
entry 1540: 511 34322243432 -> 34322243460
entry 1541: 511 34322243488 -> 34322243500
__absent_pages_in_range(0, 25168900, 68719476736) = 3687320
__absent_pages_in_range(0, 68719476736, 68719476736) = 0
__absent_pages_in_range(0, 68719476736, 34322243584) = 0
__absent_pages_in_range(0, 34322243584, 34322243584) = 0
__absent_pages_in_range(0, 25168900, 68719476736) = 3687320
...
__absent_pages_in_range(511, 34322243584, 34322243584) = 0
__absent_pages_in_range(511, 25168900, 68719476736) = 3687485
__absent_pages_in_range(511, 68719476736, 68719476736) = 0
__absent_pages_in_range(511, 68719476736, 34322243584) = 0
__absent_pages_in_range(511, 34322243584, 34322243584) = 0
Built 512 zonelists
Kernel command line: BOOT_IMAGE=net0:jfs/tonys ro hashdist=1 dhash_entries=2097152 ihash_entries=2097152 rhash_entries=2097152 thash_entries=2097152 console=ttySG0,38400n8 kdb=on noprobe root=/dev/sda5
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour dummy device 80x25
Memory: 4639378784k/4655642784k available (7021k code, 16279040k reserved, 4361k data, 736k init)
(essentially the same numbers as with a kernel w/o the patches)
McKinley Errata 9 workaround not needed; disabling it
WARNING: multiple messages have this Message-ID (diff)
From: Jack Steiner <steiner@sgi.com>
To: Mel Gorman <mel@csn.ul.ie>
Cc: davej@codemonkey.org.uk, tony.luck@intel.com,
linuxppc-dev@ozlabs.org, linux-kernel@vger.kernel.org,
bob.picco@hp.com, ak@suse.de, linux-mm@kvack.org
Subject: Re: [PATCH 0/7] [RFC] Sizing zones and holes in an architecture independent manner V3
Date: Tue, 18 Apr 2006 14:56:45 -0500 [thread overview]
Message-ID: <20060418195644.GA30911@sgi.com> (raw)
In-Reply-To: <20060418130015.28928.10163.sendpatchset@skynet>
On Tue, Apr 18, 2006 at 02:00:15PM +0100, Mel Gorman wrote:
> This is V3 of the patchset to size zones and memory holes in an
...
FYI, I applied the patches to a recent kernel & booted on a large
SGI system. No problem aside from what I assume is a very large number
of debug messages.
------
Linux version 2.6.17-tony (steiner@attica) (gcc version 4.1.0 (SUSE Linux)) #5 SMP PREEMPT Tue Apr 18 14:01:54 CDT 2006
EFI v1.10 by INTEL: SALsystab=0x6002c51df0 ACPI 2.0=0x6002c51ee0
Number of logical nodes in system = 512
Number of memory chunks in system = 512
SAL 2.9: SGI SN2 version 1.10
SAL Platform features: ITC_Drift
SAL: AP wakeup using external interrupt vector 0x12
No logical to physical processor mapping available
ACPI: Local APIC address c0000000fee00000
ACPI: Error parsing MADT - no IOSAPIC entries
register_intr: No IOSAPIC for GSI 52
512 CPUs available, 512 CPUs total
MCA related initialization done
SGI SAL version 1.10
add_active_range(0, 25168900, 25235456): New
add_active_range(0, 25236375, 25419776): New
add_active_range(0, 27262976, 27516927): New
add_active_range(0, 29360128, 29614080): New
add_active_range(1, 92277760, 92528640): New
...
add_active_range(511, 34322242024, 34322242047): New
add_active_range(511, 34322243072, 34322243417): New
add_active_range(511, 34322243432, 34322243460): New
add_active_range(511, 34322243488, 34322243500): New
Virtual mem_map starts at 0xa0007e407d270000
free_area_init_nodes(68719476736, 68719476736, 34322243584, 34322243584)
free_area_init_nodes(): find_min_pfn = 25168900
Dumping sorted node map
entry 0: 0 25168900 -> 25235456
entry 1: 0 25236375 -> 25419776
entry 2: 0 27262976 -> 27516927
entry 3: 0 29360128 -> 29614080
entry 4: 1 92277760 -> 92528640
entry 5: 1 94371840 -> 94625792
entry 6: 1 96468992 -> 96722944
...
entry 1536: 511 34321989632 -> 34322242001
entry 1537: 511 34322242016 -> 34322242022
entry 1538: 511 34322242024 -> 34322242047
entry 1539: 511 34322243072 -> 34322243417
entry 1540: 511 34322243432 -> 34322243460
entry 1541: 511 34322243488 -> 34322243500
__absent_pages_in_range(0, 25168900, 68719476736) = 3687320
__absent_pages_in_range(0, 68719476736, 68719476736) = 0
__absent_pages_in_range(0, 68719476736, 34322243584) = 0
__absent_pages_in_range(0, 34322243584, 34322243584) = 0
__absent_pages_in_range(0, 25168900, 68719476736) = 3687320
...
__absent_pages_in_range(511, 34322243584, 34322243584) = 0
__absent_pages_in_range(511, 25168900, 68719476736) = 3687485
__absent_pages_in_range(511, 68719476736, 68719476736) = 0
__absent_pages_in_range(511, 68719476736, 34322243584) = 0
__absent_pages_in_range(511, 34322243584, 34322243584) = 0
Built 512 zonelists
Kernel command line: BOOT_IMAGE=net0:jfs/tonys ro hashdist=1 dhash_entries=2097152 ihash_entries=2097152 rhash_entries=2097152 thash_entries=2097152 console=ttySG0,38400n8 kdb=on noprobe root=/dev/sda5
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour dummy device 80x25
Memory: 4639378784k/4655642784k available (7021k code, 16279040k reserved, 4361k data, 736k init)
(essentially the same numbers as with a kernel w/o the patches)
McKinley Errata 9 workaround not needed; disabling it
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2006-04-18 19:57 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-04-18 13:00 [PATCH 0/7] [RFC] Sizing zones and holes in an architecture independent manner V3 Mel Gorman
2006-04-18 13:00 ` Mel Gorman
2006-04-18 13:00 ` [PATCH 1/7] Introduce mechanism for registering active regions of memory Mel Gorman
2006-04-18 13:00 ` Mel Gorman
2006-04-18 13:00 ` [PATCH 2/7] Have Power use add_active_range() and free_area_init_nodes() Mel Gorman
2006-04-18 13:00 ` Mel Gorman
2006-04-18 13:01 ` [PATCH 3/7] Have x86 use add_active_range() and free_area_init_nodes Mel Gorman
2006-04-18 13:01 ` Mel Gorman
2006-04-18 13:01 ` [PATCH 4/7] Have x86_64 " Mel Gorman
2006-04-18 13:01 ` Mel Gorman
2006-04-18 13:01 ` [PATCH 5/7] Have ia64 " Mel Gorman
2006-04-18 13:01 ` Mel Gorman
2006-04-18 13:02 ` [PATCH 6/7] Break out memory initialisation code from page_alloc.c to mem_init.c Mel Gorman
2006-04-18 13:02 ` Mel Gorman
2006-04-18 13:02 ` [PATCH 7/7] Print out debugging information during initialisation Mel Gorman
2006-04-18 13:02 ` Mel Gorman
2006-04-18 19:56 ` Jack Steiner [this message]
2006-04-18 19:56 ` [PATCH 0/7] [RFC] Sizing zones and holes in an architecture independent manner V3 Jack Steiner
2006-04-18 19:56 ` Jack Steiner
2006-04-18 20:27 ` Mel Gorman
2006-04-18 20:27 ` Mel Gorman
2006-04-18 20:27 ` Mel Gorman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060418195644.GA30911@sgi.com \
--to=steiner@sgi.com \
--cc=ak@suse.de \
--cc=bob.picco@hp.com \
--cc=davej@codemonkey.org.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mm@kvack.org \
--cc=linuxppc-dev@ozlabs.org \
--cc=mel@csn.ul.ie \
--cc=tony.luck@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.