From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jeremiah Subject: Re: error when trying to run kissattach on 2.6.13-15.8 Suse Kernel Date: Wed, 19 Apr 2006 04:59:26 -0700 Message-ID: <200604190459.27032.jjgpg@cet.com> References: <200604172021.01888.jjgpg@cet.com> <000701c6629a$f803c4c0$e14689d8@oem7paq6co5hph> Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: <000701c6629a$f803c4c0$e14689d8@oem7paq6co5hph> Content-Disposition: inline Sender: linux-hams-owner@vger.kernel.org List-Id: Content-Type: text/plain; charset="us-ascii" To: Tom Vavra , linux-hams@vger.kernel.org On Monday 17 April 2006 20:47, you wrote: > Did you check to see if MKISS is loaded, assuming you made it a module? > lsmod should list the loaded modules. > > Tom WB8ZRL > > > ----- Original Message ----- > From: "Jeremiah" > To: > Sent: Tuesday, April 18, 2006 3:21 AM > Subject: error when trying to run kissattach on 2.6.13-15.8 Suse Kernel > > > Hello all, > > > > I get an error when trying to start up kissattach on my Suse 10 box. > > I'm running the Suse 2.6.13-15.8 kernel, no changes made to it. > > > > When I run > > "kissattach /dev/ttyS0 vhf 10.0.0.1" > > I get back > > "kissattach: Error setting line discipline: TIOCSETD: No such device > > Are you sure you have enabled MKISS support in the kernel > > or, if you made it a module, that the module is loaded?" > > > > I get no other error other than suse complaning that I didn't configure > > and > > > AX0 port. > > Any ideas, Do I need to patch? > > > > I do have the AX.25 stuff downloaded from suse linux ham YAST source. > > > > Any input would be of help. > > > > Thanks > > > > Jeremiah > > KD7DMP > > - > > To unsubscribe from this list: send the line "unsubscribe linux-hams" in > > the body of a message to majordomo@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html Yep, I made sure that Mkiss and ax25 are getting loaded, and they are. I should have knowen better then to leave that out of my posting, lol Jeremiah KD7DMP