Re: Full virtualization with Pacifica crashes

[Alexander Osthof <aosthof@suse.de>]

[-- Attachment #1.1: Type: text/plain, Size: 1130 bytes --]

Am Donnerstag, 27. April 2006 18:41 schrieb Woller, Thomas:
> > Attached is the config file for the guest domain.
>
> Specify cpus= explicitly for core 0 (cpus = "0") for your guest, we are
> having issues with using a Dom0 SMP with 64bit hv, and then attempting
> to start/pin unmodified guests to cores>0 (system reboots).  32bit hv
> works fine with SMP Dom0/hv on cores>0.
>
Thanks a lot, that solved the problem. I'm able now to install unmodified 
guests.

> Also, try using recommendation by Ian for phys
>
> >   disk = [ 'phy:/dev/vg/my_disk, ioemu:hda, w' ]
>
> I've installed win2003 server from cdrom=iso to physical disk /dev/hdb
> (100Gig partition) with this method, so it does work for SVM, using
> core0 for guest.
> disk=['phy:/dev/hdb,ioemu:hda,w']
> Specifically.
>
> Can you post output from /proc/cpuinfo from Dom0?
>
I think you don't need the output anymore, do you?

> Can you provide last line on serial output where the system hangs when
> starting up an unmodified guest? (if no valid output, that's fine the
> cpuinfo will help).
>
> thanks
> tom

Kind regards, 
Alex

[-- Attachment #1.2: Type: application/pgp-signature, Size: 189 bytes --]

[-- Attachment #2: Type: text/plain, Size: 138 bytes --]

_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel