From: Tony Lindgren <tony@atomide.com>
To: linux-kernel@vger.kernel.org
Cc: Russell King <rmk+lkml@arm.linux.org.uk>,
Pierre Ossman <drzeus-list@drzeus.cx>,
Carlos Aguiar <carlos.aguiar@indt.org.br>
Subject: MMC: 1/2 Make OMAP MMC work
Date: Thu, 4 May 2006 00:24:40 -0700 [thread overview]
Message-ID: <20060504072439.GE8664@atomide.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 1 bytes --]
[-- Attachment #2: patch-omap-mmc-compile --]
[-- Type: text/plain, Size: 4176 bytes --]
This patch makes OMAP MMC work again:
- Fix compile errors
- Do not ioremap base as it is already statically mapped
- Clean-up platform device handling
- Fix compile warnings
Signed-off-by: Tony Lindgren <tony@atomide.com>
--- a/arch/arm/plat-omap/devices.c
+++ b/arch/arm/plat-omap/devices.c
@@ -162,8 +162,8 @@ static u64 mmc1_dmamask = 0xffffffff;
static struct resource mmc1_resources[] = {
{
- .start = IO_ADDRESS(OMAP_MMC1_BASE),
- .end = IO_ADDRESS(OMAP_MMC1_BASE) + 0x7f,
+ .start = OMAP_MMC1_BASE,
+ .end = OMAP_MMC1_BASE + 0x7f,
.flags = IORESOURCE_MEM,
},
{
@@ -191,8 +191,8 @@ static u64 mmc2_dmamask = 0xffffffff;
static struct resource mmc2_resources[] = {
{
- .start = IO_ADDRESS(OMAP_MMC2_BASE),
- .end = IO_ADDRESS(OMAP_MMC2_BASE) + 0x7f,
+ .start = OMAP_MMC2_BASE,
+ .end = OMAP_MMC2_BASE + 0x7f,
.flags = IORESOURCE_MEM,
},
{
diff --git a/drivers/mmc/omap.c b/drivers/mmc/omap.c
index becb3c6..7c8b6ce 100644
--- a/drivers/mmc/omap.c
+++ b/drivers/mmc/omap.c
@@ -61,6 +61,7 @@ struct mmc_omap_host {
unsigned char id; /* 16xx chips have 2 MMC blocks */
struct clk * iclk;
struct clk * fclk;
+ struct resource *res;
void __iomem *base;
int irq;
unsigned char bus_mode;
@@ -340,8 +341,6 @@ static void
mmc_omap_xfer_data(struct mmc_omap_host *host, int write)
{
int n;
- void __iomem *reg;
- u16 *p;
if (host->buffer_bytes_left == 0) {
host->sg_idx++;
@@ -658,8 +657,8 @@ static void mmc_omap_dma_cb(int lch, u16
struct mmc_data *mmcdat = host->data;
if (unlikely(host->dma_ch < 0)) {
- dev_err(mmc_dev(host->mmc), "DMA callback while DMA not
- enabled\n");
+ dev_err(mmc_dev(host->mmc),
+ "DMA callback while DMA not enabled\n");
return;
}
/* FIXME: We really should do something to _handle_ the errors */
@@ -973,20 +972,20 @@ static int __init mmc_omap_probe(struct
struct omap_mmc_conf *minfo = pdev->dev.platform_data;
struct mmc_host *mmc;
struct mmc_omap_host *host = NULL;
+ struct resource *r;
int ret = 0;
+ int irq;
- if (platform_get_resource(pdev, IORESOURCE_MEM, 0) ||
- platform_get_irq(pdev, IORESOURCE_IRQ, 0)) {
- dev_err(&pdev->dev, "mmc_omap_probe: invalid resource type\n");
- return -ENODEV;
- }
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(pdev, 0);
+ if (!r || irq < 0)
+ return -ENXIO;
- if (!request_mem_region(pdev->resource[0].start,
+ r = request_mem_region(pdev->resource[0].start,
pdev->resource[0].end - pdev->resource[0].start + 1,
- pdev->name)) {
- dev_dbg(&pdev->dev, "request_mem_region failed\n");
+ pdev->name);
+ if (!r)
return -EBUSY;
- }
mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev);
if (!mmc) {
@@ -1003,6 +1002,8 @@ static int __init mmc_omap_probe(struct
host->dma_timer.data = (unsigned long) host;
host->id = pdev->id;
+ host->res = r;
+ host->irq = irq;
if (cpu_is_omap24xx()) {
host->iclk = clk_get(&pdev->dev, "mmc_ick");
@@ -1032,13 +1033,9 @@ static int __init mmc_omap_probe(struct
host->dma_ch = -1;
host->irq = pdev->resource[1].start;
- host->base = ioremap(pdev->res.start, SZ_4K);
- if (!host->base) {
- ret = -ENOMEM;
- goto out;
- }
+ host->base = (void __iomem*)IO_ADDRESS(r->start);
- if (minfo->wire4)
+ if (minfo->wire4)
mmc->caps |= MMC_CAP_4_BIT_DATA;
mmc->ops = &mmc_omap_ops;
@@ -1057,8 +1054,8 @@ static int __init mmc_omap_probe(struct
if (host->power_pin >= 0) {
if ((ret = omap_request_gpio(host->power_pin)) != 0) {
- dev_err(mmc_dev(host->mmc), "Unable to get GPIO
- pin for MMC power\n");
+ dev_err(mmc_dev(host->mmc),
+ "Unable to get GPIO pin for MMC power\n");
goto out;
}
omap_set_gpio_direction(host->power_pin, 0);
@@ -1100,7 +1097,7 @@ static int __init mmc_omap_probe(struct
device_remove_file(&pdev->dev, &dev_attr_cover_switch);
}
if (ret) {
- dev_wan(mmc_dev(host->mmc), "Unable to create sysfs attributes\n");
+ dev_warn(mmc_dev(host->mmc), "Unable to create sysfs attributes\n");
free_irq(OMAP_GPIO_IRQ(host->switch_pin), host);
omap_free_gpio(host->switch_pin);
host->switch_pin = -1;
next reply other threads:[~2006-05-04 7:24 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-04 7:24 Tony Lindgren [this message]
2006-05-04 7:26 ` MMC: 2/2 Fix MMC_POWER_UP on some OMAP boards Tony Lindgren
2006-05-04 7:54 ` Russell King
2006-05-04 9:31 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060504072439.GE8664@atomide.com \
--to=tony@atomide.com \
--cc=carlos.aguiar@indt.org.br \
--cc=drzeus-list@drzeus.cx \
--cc=linux-kernel@vger.kernel.org \
--cc=rmk+lkml@arm.linux.org.uk \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.