From: Daniel Jacobowitz <dan@debian.org>
To: ralf@linux-mips.org, linux-mips@linux-mips.org
Subject: Update struct sigcontext member names
Date: Mon, 8 May 2006 15:28:22 -0400 [thread overview]
Message-ID: <20060508192822.GA14037@nevyn.them.org> (raw)
Rename the MIPS64 sc_hi and sc_lo arrays to use the same names
as the MIPS32 struct sigcontext (sc_mdhi, sc_hi1, et cetera).
Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
---
As we discussed earlier - this lets glibc use the same definitions, without
breaking source compatibility for the 64-bit sigcontext.
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index 92b28b6..0facfaf 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -272,8 +272,8 @@ void output_sc_defines(void)
text("/* Linux sigcontext offsets. */");
offset("#define SC_REGS ", struct sigcontext, sc_regs);
offset("#define SC_FPREGS ", struct sigcontext, sc_fpregs);
- offset("#define SC_MDHI ", struct sigcontext, sc_hi);
- offset("#define SC_MDLO ", struct sigcontext, sc_lo);
+ offset("#define SC_MDHI ", struct sigcontext, sc_mdhi);
+ offset("#define SC_MDLO ", struct sigcontext, sc_mdlo);
offset("#define SC_PC ", struct sigcontext, sc_pc);
offset("#define SC_FPC_CSR ", struct sigcontext, sc_fpc_csr);
linefeed;
diff --git a/arch/mips/kernel/signal-common.h b/arch/mips/kernel/signal-common.h
index 3ca7862..ce6cb91 100644
--- a/arch/mips/kernel/signal-common.h
+++ b/arch/mips/kernel/signal-common.h
@@ -31,7 +31,6 @@ #define save_gp_reg(i) do { \
save_gp_reg(31);
#undef save_gp_reg
-#ifdef CONFIG_32BIT
err |= __put_user(regs->hi, &sc->sc_mdhi);
err |= __put_user(regs->lo, &sc->sc_mdlo);
if (cpu_has_dsp) {
@@ -43,20 +42,6 @@ #ifdef CONFIG_32BIT
err |= __put_user(mflo3(), &sc->sc_lo3);
err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
}
-#endif
-#ifdef CONFIG_64BIT
- err |= __put_user(regs->hi, &sc->sc_hi[0]);
- err |= __put_user(regs->lo, &sc->sc_lo[0]);
- if (cpu_has_dsp) {
- err |= __put_user(mfhi1(), &sc->sc_hi[1]);
- err |= __put_user(mflo1(), &sc->sc_lo[1]);
- err |= __put_user(mfhi2(), &sc->sc_hi[2]);
- err |= __put_user(mflo2(), &sc->sc_lo[2]);
- err |= __put_user(mfhi3(), &sc->sc_hi[3]);
- err |= __put_user(mflo3(), &sc->sc_lo[3]);
- err |= __put_user(rddsp(DSP_MASK), &sc->sc_dsp);
- }
-#endif
err |= __put_user(!!used_math(), &sc->sc_used_math);
@@ -92,7 +77,6 @@ restore_sigcontext(struct pt_regs *regs,
current_thread_info()->restart_block.fn = do_no_restart_syscall;
err |= __get_user(regs->cp0_epc, &sc->sc_pc);
-#ifdef CONFIG_32BIT
err |= __get_user(regs->hi, &sc->sc_mdhi);
err |= __get_user(regs->lo, &sc->sc_mdlo);
if (cpu_has_dsp) {
@@ -104,20 +88,6 @@ #ifdef CONFIG_32BIT
err |= __get_user(treg, &sc->sc_lo3); mtlo3(treg);
err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
}
-#endif
-#ifdef CONFIG_64BIT
- err |= __get_user(regs->hi, &sc->sc_hi[0]);
- err |= __get_user(regs->lo, &sc->sc_lo[0]);
- if (cpu_has_dsp) {
- err |= __get_user(treg, &sc->sc_hi[1]); mthi1(treg);
- err |= __get_user(treg, &sc->sc_lo[1]); mthi1(treg);
- err |= __get_user(treg, &sc->sc_hi[2]); mthi2(treg);
- err |= __get_user(treg, &sc->sc_lo[2]); mthi2(treg);
- err |= __get_user(treg, &sc->sc_hi[3]); mthi3(treg);
- err |= __get_user(treg, &sc->sc_lo[3]); mthi3(treg);
- err |= __get_user(treg, &sc->sc_dsp); wrdsp(treg, DSP_MASK);
- }
-#endif
#define restore_gp_reg(i) do { \
err |= __get_user(regs->regs[i], &sc->sc_regs[i]); \
diff --git a/include/asm-mips/sigcontext.h b/include/asm-mips/sigcontext.h
index 8edabb0..cefa657 100644
--- a/include/asm-mips/sigcontext.h
+++ b/include/asm-mips/sigcontext.h
@@ -55,8 +55,14 @@ #if _MIPS_SIM == _MIPS_SIM_ABI64 || _MIP
struct sigcontext {
unsigned long sc_regs[32];
unsigned long sc_fpregs[32];
- unsigned long sc_hi[4];
- unsigned long sc_lo[4];
+ unsigned long sc_mdhi;
+ unsigned long sc_hi1;
+ unsigned long sc_hi2;
+ unsigned long sc_hi3;
+ unsigned long sc_mdlo;
+ unsigned long sc_lo1;
+ unsigned long sc_lo2;
+ unsigned long sc_lo3;
unsigned long sc_pc;
unsigned int sc_fpc_csr;
unsigned int sc_used_math;
--
Daniel Jacobowitz
CodeSourcery
reply other threads:[~2006-05-08 19:28 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060508192822.GA14037@nevyn.them.org \
--to=dan@debian.org \
--cc=linux-mips@linux-mips.org \
--cc=ralf@linux-mips.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.