From: Marcin Juszkiewicz <linux-arm@hrw.one.pl>
To: netdev@vger.kernel.org
Cc: Jouni Malinen <jkmaline@cc.hut.fi>, Pavel Roskin <proski@gnu.org>
Subject: [PATCH 3/5] new pcmcia IDs for hostap - D-Link DCF-660W
Date: Fri, 12 May 2006 15:45:18 +0200 [thread overview]
Message-ID: <200605121545.19635.linux-arm@hrw.one.pl> (raw)
I use D-Link DCF-660W card with WPA protected network. By default
orinoco_cs was loaded for my card so I was not able to connect. This patch
make my card working with hostap_cs (like it was when I used pcmcia-cs).
Card was used with hostap_cs during last year in two Zaurus models (2.4.18
on one and 2.6.11 - 2.6.16 on another).
I do not know does removing card from orinoco_cs is correct way.
Platform: Sharp Zaurus C760 running 2.6.16 and pcmciautils 013.
root@c7x0:~# pccardctl ident
Socket 0:
product info: "D-Link", "DCF-660W", "", ""
manfid: 0xd601, 0x0005
function: 6 (network)
root@c7x0:~# iwconfig wlan0
wlan0 IEEE 802.11b ESSID:"test"
Mode:Master Frequency:2.422 GHz Access Point: 00:80:C8:2C:09:3F
Bit Rate:11 Mb/s Sensitivity=1/3
Retry min limit:8 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
Signed-off-by: Marcin Juszkiewicz <openembedded@hrw.one.pl>
Index: linux/drivers/net/wireless/hostap/hostap_cs.c
===================================================================
--- linux.orig/drivers/net/wireless/hostap/hostap_cs.c 2006-05-12 15:36:08.000000000 +0200
+++ linux/drivers/net/wireless/hostap/hostap_cs.c 2006-05-12 15:43:36.000000000 +0200
@@ -974,6 +974,8 @@
0x273fe3db, 0x32a1eaee),
PCMCIA_DEVICE_PROD_ID12("Linksys", "Wireless CompactFlash Card",
0x0733cc81, 0x0c52f395),
+ PCMCIA_DEVICE_PROD_ID12("D-Link", "DCF-660W",
+ 0x1a424a1c, 0xe78b6dcc),
PCMCIA_DEVICE_NULL
};
MODULE_DEVICE_TABLE(pcmcia, hostap_cs_ids);
Index: linux/drivers/net/wireless/orinoco_cs.c
===================================================================
--- linux.orig/drivers/net/wireless/orinoco_cs.c 2006-05-12 15:34:49.000000000 +0200
+++ linux/drivers/net/wireless/orinoco_cs.c 2006-05-12 15:42:32.000000000 +0200
@@ -539,7 +539,6 @@
PCMCIA_DEVICE_MANF_CARD(0xc001, 0x0008), /* CONTEC FLEXSCAN/FX-DDS110-PCC */
PCMCIA_DEVICE_MANF_CARD(0xc250, 0x0002), /* Conceptronic CON11Cpro, EMTAC A2424i */
PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0002), /* Safeway 802.11b, ZCOMAX AirRunner/XI-300 */
- PCMCIA_DEVICE_MANF_CARD(0xd601, 0x0005), /* D-Link DCF660, Sandisk Connect SDWCFB-000 */
PCMCIA_DEVICE_PROD_ID12(" ", "IEEE 802.11 Wireless LAN/PC Card", 0x3b6e20c8, 0xefccafe9),
PCMCIA_DEVICE_PROD_ID12("3Com", "3CRWE737A AirConnect Wireless LAN PC Card", 0x41240e5b, 0x56010af3),
PCMCIA_DEVICE_PROD_ID12("ACTIONTEC", "PRISM Wireless LAN PC Card", 0x393089da, 0xa71e69d5),
--
JID: hrw-jabber.org
Sharp Zaurus C-760 (OZ 3.5.x)
OpenEmbedded/OpenZaurus/OPIE developer
Fear leads to anger, anger leads to hate, hate... leads to suffering.
-- Yoda
next reply other threads:[~2006-05-12 13:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-12 13:45 Marcin Juszkiewicz [this message]
2006-05-12 17:06 ` [PATCH 3/5] new pcmcia IDs for hostap - D-Link DCF-660W Marcin Juszkiewicz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200605121545.19635.linux-arm@hrw.one.pl \
--to=linux-arm@hrw.one.pl \
--cc=jkmaline@cc.hut.fi \
--cc=netdev@vger.kernel.org \
--cc=proski@gnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.