From: "Raphael Bossek" <raphael.bossek@gmx.de>
To: linux-ide@vger.kernel.org
Subject: How to debug CompactFlash card fails on PATA port of an SATA controller ?
Date: Tue, 16 May 2006 10:11:21 +0200 [thread overview]
Message-ID: <20060516081121.78840@gmx.net> (raw)
Hi,
I get the PATA interface of my Promise PDC40775 (SATA 300 TX2plus) working.
But now I run into trouble while connecting a SimpleTech CompactFlash card
SLCF512J2U-F (512MB). This are are the messages from log:
sata_promise 0000:00:0a.0: version 1.04
ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 17 (level, low) -> IRQ 217
sata_promise PATA port found
ata9: SATA max UDMA/133 cmd 0xBE9D0200 ctl 0xBE9D0238 bmdma 0x0 irq 217
ata10: SATA max UDMA/133 cmd 0xBE9D0280 ctl 0xBE9D02B8 bmdma 0x0 irq 217
sata_promiseDisabling SATA for third port
ata11: PATA max UDMA/133 cmd 0xBE9D0300 ctl 0xBE9D0338 bmdma 0x0 irq 217
ata9: SATA link down (SStatus 0)
scsi8 : sata_promise
ata10: SATA link down (SStatus 0)
scsi9 : sata_promise
ata11: dev 0 cfg 49:0300 82:7068 83:4004 84:4000 85:7068 86:0004 87:4000 88:0000
ata11: dev 0 ATA-0, max MWDMA2, 1000944 sectors: LBA
ata11: dev 0 configured for MWDMA2
scsi10 : sata_promise
Vendor: ATA Model: STI Flash 7.3.0 Rev: 06/1
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 1000944 512-byte hdwr sectors (512 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 1000944 512-byte hdwr sectors (512 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb:<3>ata11: command timeout
ata11: translated ATA stat/err 0xff/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata11: status=0xff { Busy }
sd 10:0:0:0: SCSI error: return code = 0x8000002
sdb: Current: sense key: Aborted Command
Additional sense: Scsi parity error
Info fld=0xfffffff
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
ata11: command timeout
ata11: translated ATA stat/err 0xff/00 to SCSI SK/ASC/ASCQ 0xb/47/00
ata11: status=0xff { Busy }
sd 10:0:0:0: SCSI error: return code = 0x8000002
sdb: Current: sense key: Aborted Command
Additional sense: Scsi parity error
Info fld=0xfffffff
end_request: I/O error, dev sdb, sector 0
Buffer I/O error on device sdb, logical block 0
unable to read partition table
sd 10:0:0:0: Attached scsi disk sdb
How can I identify the real problem for this device ?
--
Raphael Bossek
--
Bis zu 70% Ihrer Onlinekosten sparen: GMX SmartSurfer!
Kostenlos downloaden: http://www.gmx.net/de/go/smartsurfer
next reply other threads:[~2006-05-16 8:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-16 8:11 Raphael Bossek [this message]
2006-05-17 5:18 ` How to debug CompactFlash card fails on PATA port of an SATA controller ? Albert Lee
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060516081121.78840@gmx.net \
--to=raphael.bossek@gmx.de \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.