From: Adrian Bunk <bunk@stusta.de>
To: mchehab@infradead.org
Cc: v4l-dvb-maintainer@linuxtv.org, linux-kernel@vger.kernel.org
Subject: [RFC: 2.6 patch] drivers/media/video/bt8xx/: possible cleanups
Date: Wed, 17 May 2006 00:17:29 +0200 [thread overview]
Message-ID: <20060516221729.GV10077@stusta.de> (raw)
This patch contains the following possible cleanups:
- remove the following unused global functions:
- bttv-if.c: bttv_get_cardinfo()
- bttv-if.c: bttv_get_id()
- bttv-if.c: bttv_get_gpio_queue()
- bttv-if.c: bttv_i2c_call()
- #if 0 the following unused global function:
- bttv-gpio.c: bttv_gpio_irq()
- remove the following unused EXPORT_SYMBOL's:
- bttv-gpio.c: bttv_sub_bus_type
- bttv-gpio.c: bttv_gpio_inout
- bttv-gpio.c: bttv_gpio_read
- bttv-gpio.c: bttv_gpio_write
- bttv-gpio.c: bttv_gpio_bits
Signed-off-by: Adrian Bunk <bunk@stusta.de>
---
This patch was already sent on:
- 23 Apr 2006
drivers/media/video/bt8xx/bttv-gpio.c | 7 +--
drivers/media/video/bt8xx/bttv-if.c | 49 --------------------------
drivers/media/video/bt8xx/bttv.h | 24 ------------
drivers/media/video/bt8xx/bttvp.h | 1
4 files changed, 2 insertions(+), 79 deletions(-)
--- linux-2.6.17-rc1-mm3-full/drivers/media/video/bt8xx/bttvp.h.old 2006-04-23 01:20:03.000000000 +0200
+++ linux-2.6.17-rc1-mm3-full/drivers/media/video/bt8xx/bttvp.h 2006-04-23 01:20:06.000000000 +0200
@@ -214,7 +214,6 @@
extern struct bus_type bttv_sub_bus_type;
int bttv_sub_add_device(struct bttv_core *core, char *name);
int bttv_sub_del_devices(struct bttv_core *core);
-void bttv_gpio_irq(struct bttv_core *core);
/* ---------------------------------------------------------- */
--- linux-2.6.17-rc1-mm3-full/drivers/media/video/bt8xx/bttv-gpio.c.old 2006-04-23 01:18:08.000000000 +0200
+++ linux-2.6.17-rc1-mm3-full/drivers/media/video/bt8xx/bttv-gpio.c 2006-04-23 01:19:52.000000000 +0200
@@ -71,7 +71,6 @@
.probe = bttv_sub_probe,
.remove = bttv_sub_remove,
};
-EXPORT_SYMBOL(bttv_sub_bus_type);
static void release_sub_device(struct device *dev)
{
@@ -118,6 +117,7 @@
return 0;
}
+#if 0
void bttv_gpio_irq(struct bttv_core *core)
{
struct bttv_sub_driver *drv;
@@ -131,6 +131,7 @@
drv->gpio_irq(dev);
}
}
+#endif /* 0 */
/* ----------------------------------------------------------------------- */
/* external: sub-driver register/unregister */
@@ -166,7 +167,6 @@
btwrite(data,BT848_GPIO_OUT_EN);
spin_unlock_irqrestore(&btv->gpio_lock,flags);
}
-EXPORT_SYMBOL(bttv_gpio_inout);
u32 bttv_gpio_read(struct bttv_core *core)
{
@@ -176,7 +176,6 @@
value = btread(BT848_GPIO_DATA);
return value;
}
-EXPORT_SYMBOL(bttv_gpio_read);
void bttv_gpio_write(struct bttv_core *core, u32 value)
{
@@ -184,7 +183,6 @@
btwrite(value,BT848_GPIO_DATA);
}
-EXPORT_SYMBOL(bttv_gpio_write);
void bttv_gpio_bits(struct bttv_core *core, u32 mask, u32 bits)
{
@@ -199,7 +197,6 @@
btwrite(data,BT848_GPIO_DATA);
spin_unlock_irqrestore(&btv->gpio_lock,flags);
}
-EXPORT_SYMBOL(bttv_gpio_bits);
/*
* Local variables:
--- linux-2.6.17-rc1-mm3-full/drivers/media/video/bt8xx/bttv.h.old 2006-04-23 01:21:30.000000000 +0200
+++ linux-2.6.17-rc1-mm3-full/drivers/media/video/bt8xx/bttv.h 2006-04-23 01:23:19.000000000 +0200
@@ -287,17 +287,8 @@
/* this obsolete -- please use the sysfs-based
interface below for new code */
-/* returns card type + card ID (for bt878-based ones)
- for possible values see lines below beginning with #define BTTV_BOARD_UNKNOWN
- returns negative value if error occurred
-*/
-extern int bttv_get_cardinfo(unsigned int card, int *type,
- unsigned int *cardid);
extern struct pci_dev* bttv_get_pcidev(unsigned int card);
-/* obsolete, use bttv_get_cardinfo instead */
-extern int bttv_get_id(unsigned int card);
-
/* sets GPOE register (BT848_GPIO_OUT_EN) to new value:
data | (current_GPOE_value & ~mask)
returns negative value if error occurred
@@ -317,21 +308,6 @@
extern int bttv_write_gpio(unsigned int card,
unsigned long mask, unsigned long data);
-/* returns pointer to task queue which can be used as parameter to
- interruptible_sleep_on
- in interrupt handler if BT848_INT_GPINT bit is set - this queue is activated
- (wake_up_interruptible) and following call to the function bttv_read_gpio
- should return new value of GPDATA,
- returns NULL value if error occurred or queue is not available
- WARNING: because there is no buffer for GPIO data, one MUST
- process data ASAP
-*/
-extern wait_queue_head_t* bttv_get_gpio_queue(unsigned int card);
-
-/* call i2c clients
-*/
-extern void bttv_i2c_call(unsigned int card, unsigned int cmd, void *arg);
-
/* ---------------------------------------------------------- */
--- linux-2.6.17-rc1-mm3-full/drivers/media/video/bt8xx/bttv-if.c.old 2006-04-23 01:20:25.000000000 +0200
+++ linux-2.6.17-rc1-mm3-full/drivers/media/video/bt8xx/bttv-if.c 2006-04-23 01:23:39.000000000 +0200
@@ -33,32 +33,16 @@
#include "bttvp.h"
-EXPORT_SYMBOL(bttv_get_cardinfo);
EXPORT_SYMBOL(bttv_get_pcidev);
-EXPORT_SYMBOL(bttv_get_id);
EXPORT_SYMBOL(bttv_gpio_enable);
EXPORT_SYMBOL(bttv_read_gpio);
EXPORT_SYMBOL(bttv_write_gpio);
-EXPORT_SYMBOL(bttv_get_gpio_queue);
-EXPORT_SYMBOL(bttv_i2c_call);
/* ----------------------------------------------------------------------- */
/* Exported functions - for other modules which want to access the */
/* gpio ports (IR for example) */
/* see bttv.h for comments */
-int bttv_get_cardinfo(unsigned int card, int *type, unsigned *cardid)
-{
- printk("The bttv_* interface is obsolete and will go away,\n"
- "please use the new, sysfs based interface instead.\n");
- if (card >= bttv_num) {
- return -1;
- }
- *type = bttvs[card].c.type;
- *cardid = bttvs[card].cardid;
- return 0;
-}
-
struct pci_dev* bttv_get_pcidev(unsigned int card)
{
if (card >= bttv_num)
@@ -66,17 +50,6 @@
return bttvs[card].c.pci;
}
-int bttv_get_id(unsigned int card)
-{
- printk("The bttv_* interface is obsolete and will go away,\n"
- "please use the new, sysfs based interface instead.\n");
- if (card >= bttv_num) {
- return -1;
- }
- return bttvs[card].c.type;
-}
-
-
int bttv_gpio_enable(unsigned int card, unsigned long mask, unsigned long data)
{
struct bttv *btv;
@@ -130,28 +103,6 @@
return 0;
}
-wait_queue_head_t* bttv_get_gpio_queue(unsigned int card)
-{
- struct bttv *btv;
-
- if (card >= bttv_num) {
- return NULL;
- }
-
- btv = &bttvs[card];
- if (bttvs[card].shutdown) {
- return NULL;
- }
- return &btv->gpioq;
-}
-
-void bttv_i2c_call(unsigned int card, unsigned int cmd, void *arg)
-{
- if (card >= bttv_num)
- return;
- bttv_call_i2c_clients(&bttvs[card], cmd, arg);
-}
-
/*
* Local variables:
* c-basic-offset: 8
next reply other threads:[~2006-05-16 22:17 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-16 22:17 Adrian Bunk [this message]
2006-05-18 15:21 ` [v4l-dvb-maintainer] [RFC: 2.6 patch] drivers/media/video/bt8xx/: possible cleanups Ricardo Cerqueira
-- strict thread matches above, loose matches on Subject: below --
2007-01-24 22:36 Adrian Bunk
2007-02-20 0:07 Adrian Bunk
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20060516221729.GV10077@stusta.de \
--to=bunk@stusta.de \
--cc=linux-kernel@vger.kernel.org \
--cc=mchehab@infradead.org \
--cc=v4l-dvb-maintainer@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.