From: viet@mandriva.com
To: Jeff Garzik <jgarzik@pobox.com>
Cc: linux-ide@vger.kernel.org
Subject: pdc20575 and driver 1.04
Date: Fri, 19 May 2006 18:15:43 +0200 [thread overview]
Message-ID: <200605191815.44099.viet@mandriva.com> (raw)
Hi Jeff,
We've briefly met at Deauville while you were working with mandriva
I hope everything is fine with you - I myself have just been laid off, just about six years after joining mandrake ...
Anyway, back to business.
I have a Promise sataII TX2+ cards, with a pdc 20575.
I have just tried stock 2.6.17-rc4 and applied 2.6.17-rc4-git2-libata1.patch.bz2
I am only detecting the two sata lines.
the motherboard is smp, and has pdc20265 onboard. there are 4 drives attached to the TX2+ (two sata, two pata)
If I am not mistaken, driver version 1.04 is the latest one you have ?
Do you have any idea why it's not detecting the pata channel ?
Thanks !
my log follows :
May 19 14:03:08 anoath kernel: nfsd: last server has exited
May 19 14:03:08 anoath kernel: nfsd: unexporting all filesystems
May 19 14:03:08 anoath kernel: Kernel logging (proc) stopped.
May 19 14:03:08 anoath kernel: Kernel log daemon terminating.
May 19 14:08:36 anoath kernel: klogd 1.4.1#17, log source = /proc/kmsg started.
May 19 14:08:36 anoath kernel: Inspecting /boot/System.map-2.6.17-rc4
May 19 14:08:37 anoath kernel: Loaded 20178 symbols from /boot/System.map-2.6.17-rc4.
May 19 14:08:37 anoath kernel: Symbols match kernel version 2.6.17.
May 19 14:08:37 anoath kernel: No module symbols loaded - kernel modules not enabled.
May 19 14:08:37 anoath kernel: Linux version 2.6.17-rc4 (root@rogue) (gcc version 4.0.3) #1 SMP Fri May 19 12:19:13 CEST 2006
May 19 14:08:37 anoath kernel: BIOS-provided physical RAM map:
May 19 14:08:37 anoath kernel: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
May 19 14:08:37 anoath kernel: BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
May 19 14:08:37 anoath kernel: BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
May 19 14:08:37 anoath kernel: BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
May 19 14:08:37 anoath kernel: BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
May 19 14:08:37 anoath kernel: BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
May 19 14:08:37 anoath kernel: BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
May 19 14:08:37 anoath kernel: 1151MB HIGHMEM available.
May 19 14:08:37 anoath kernel: 896MB LOWMEM available.
May 19 14:08:37 anoath kernel: found SMP MP-table at 000f5c70
May 19 14:08:37 anoath kernel: On node 0 totalpages: 524272
May 19 14:08:37 anoath kernel: DMA zone: 4096 pages, LIFO batch:0
May 19 14:08:37 anoath kernel: Normal zone: 225280 pages, LIFO batch:31
May 19 14:08:37 anoath kernel: HighMem zone: 294896 pages, LIFO batch:31
May 19 14:08:37 anoath kernel: DMI 2.2 present.
May 19 14:08:37 anoath kernel: ACPI: RSDP (v000 VIA694 ) @ 0x000f74c0
May 19 14:08:37 anoath kernel: ACPI: RSDT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff3000
May 19 14:08:37 anoath kernel: ACPI: FADT (v001 VIA694 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff3040
May 19 14:08:37 anoath kernel: ACPI: MADT (v001 VIA694 0x00000000 0x00000000) @ 0x7fff5900
May 19 14:08:37 anoath kernel: ACPI: DSDT (v001 VIA694 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
May 19 14:08:37 anoath kernel: ACPI: PM-Timer IO Port: 0x4008
May 19 14:08:37 anoath kernel: ACPI: Local APIC address 0xfee00000
May 19 14:08:37 anoath kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
May 19 14:08:37 anoath kernel: Processor #0 6:8 APIC version 17
May 19 14:08:37 anoath kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
May 19 14:08:37 anoath kernel: Processor #1 6:8 APIC version 17
May 19 14:08:37 anoath kernel: ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
May 19 14:08:37 anoath kernel: IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
May 19 14:08:37 anoath kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
May 19 14:08:37 anoath kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 dfl dfl)
May 19 14:08:37 anoath kernel: ACPI: IRQ0 used by override.
May 19 14:08:37 anoath kernel: ACPI: IRQ2 used by override.
May 19 14:08:37 anoath kernel: ACPI: IRQ11 used by override.
May 19 14:08:37 anoath kernel: Enabling APIC mode: Flat. Using 1 I/O APICs
May 19 14:08:37 anoath kernel: Using ACPI (MADT) for SMP configuration information
May 19 14:08:37 anoath kernel: Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
May 19 14:08:37 anoath kernel: Built 1 zonelists
May 19 14:08:37 anoath kernel: Kernel command line: root=/dev/hda1 ro
May 19 14:08:37 anoath kernel: mapped APIC to ffffd000 (fee00000)
May 19 14:08:37 anoath kernel: mapped IOAPIC to ffffc000 (fec00000)
May 19 14:08:37 anoath kernel: Enabling fast FPU save and restore... done.
May 19 14:08:37 anoath kernel: Enabling unmasked SIMD FPU exception support... done.
May 19 14:08:37 anoath kernel: Initializing CPU#0
May 19 14:08:37 anoath kernel: PID hash table entries: 4096 (order: 12, 16384 bytes)
May 19 14:08:37 anoath kernel: Detected 1002.467 MHz processor.
May 19 14:08:37 anoath kernel: Using pmtmr for high-res timesource
May 19 14:08:37 anoath kernel: Console: colour VGA+ 80x25
May 19 14:08:37 anoath kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
May 19 14:08:37 anoath kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
May 19 14:08:37 anoath kernel: Memory: 2075372k/2097088k available (2057k kernel code, 20488k reserved, 640k data, 216k init, 1179584k highmem)
May 19 14:08:37 anoath kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
May 19 14:08:37 anoath kernel: Calibrating delay using timer specific routine.. 2006.86 BogoMIPS (lpj=4013735)
May 19 14:08:37 anoath kernel: Mount-cache hash table entries: 512
May 19 14:08:37 anoath kernel: CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
May 19 14:08:37 anoath kernel: CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
May 19 14:08:37 anoath kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
May 19 14:08:37 anoath kernel: CPU: L2 cache: 256K
May 19 14:08:37 anoath kernel: CPU serial number disabled.
May 19 14:08:37 anoath kernel: CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
May 19 14:08:37 anoath kernel: Intel machine check architecture supported.
May 19 14:08:37 anoath kernel: Intel machine check reporting enabled on CPU#0.
May 19 14:08:37 anoath kernel: Checking 'hlt' instruction... OK.
May 19 14:08:37 anoath kernel: Freeing SMP alternatives: 16k freed
May 19 14:08:37 anoath kernel: CPU0: Intel Pentium III (Coppermine) stepping 0a
May 19 14:08:37 anoath kernel: Booting processor 1/1 eip 2000
May 19 14:08:37 anoath kernel: Initializing CPU#1
May 19 14:08:37 anoath kernel: Calibrating delay using timer specific routine.. 2004.76 BogoMIPS (lpj=4009526)
May 19 14:08:37 anoath kernel: CPU: After generic identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
May 19 14:08:37 anoath kernel: CPU: After vendor identify, caps: 0387fbff 00000000 00000000 00000000 00000000 00000000 00000000
May 19 14:08:37 anoath kernel: CPU: L1 I cache: 16K, L1 D cache: 16K
May 19 14:08:37 anoath kernel: CPU: L2 cache: 256K
May 19 14:08:37 anoath kernel: CPU serial number disabled.
May 19 14:08:37 anoath kernel: CPU: After all inits, caps: 0383fbff 00000000 00000000 00000040 00000000 00000000 00000000
May 19 14:08:37 anoath kernel: Intel machine check architecture supported.
May 19 14:08:37 anoath kernel: Intel machine check reporting enabled on CPU#1.
May 19 14:08:37 anoath kernel: CPU1: Intel Pentium III (Coppermine) stepping 0a
May 19 14:08:37 anoath kernel: Total of 2 processors activated (4011.63 BogoMIPS).
May 19 14:08:37 anoath kernel: ENABLING IO-APIC IRQs
May 19 14:08:37 anoath kernel: ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
May 19 14:08:37 anoath kernel: checking TSC synchronization across 2 CPUs: passed.
May 19 14:08:37 anoath kernel: Brought up 2 CPUs
May 19 14:08:37 anoath kernel: migration_cost=4000
May 19 14:08:37 anoath kernel: NET: Registered protocol family 16
May 19 14:08:37 anoath kernel: ACPI: bus type pci registered
May 19 14:08:37 anoath kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb2c0, last bus=1
May 19 14:08:37 anoath kernel: Setting up standard PCI resources
May 19 14:08:37 anoath kernel: mtrr: your CPUs had inconsistent variable MTRR settings
May 19 14:08:37 anoath kernel: mtrr: probably your BIOS does not setup all CPUs.
May 19 14:08:37 anoath kernel: mtrr: corrected configuration.
May 19 14:08:37 anoath kernel: ACPI: Subsystem revision 20060127
May 19 14:08:37 anoath kernel: ACPI: Interpreter enabled
May 19 14:08:37 anoath kernel: ACPI: Using IOAPIC for interrupt routing
May 19 14:08:37 anoath kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
May 19 14:08:37 anoath kernel: PCI: Probing PCI hardware (bus 00)
May 19 14:08:37 anoath kernel: ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
May 19 14:08:37 anoath kernel: PCI quirk: region 6000-607f claimed by vt82c686 HW-mon
May 19 14:08:37 anoath kernel: PCI quirk: region 5000-500f claimed by vt82c686 SMB
May 19 14:08:37 anoath kernel: Boot video device is 0000:01:00.0
May 19 14:08:37 anoath kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
May 19 14:08:37 anoath kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9
May 19 14:08:37 anoath kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
May 19 14:08:37 anoath kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
May 19 14:08:37 anoath kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
May 19 14:08:37 anoath kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
May 19 14:08:37 anoath kernel: pnp: PnP ACPI init
May 19 14:08:37 anoath kernel: pnp: PnP ACPI: found 12 devices
May 19 14:08:37 anoath kernel: PnPBIOS: Disabled by ACPI PNP
May 19 14:08:37 anoath kernel: PCI: Using ACPI for IRQ routing
May 19 14:08:37 anoath kernel: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
May 19 14:08:37 anoath kernel: PCI: Bridge: 0000:00:01.0
May 19 14:08:37 anoath kernel: IO window: disabled.
May 19 14:08:37 anoath kernel: MEM window: d6000000-d7ffffff
May 19 14:08:37 anoath kernel: PREFETCH window: d4000000-d5ffffff
May 19 14:08:37 anoath kernel: PCI: Setting latency timer of device 0000:00:01.0 to 64
May 19 14:08:37 anoath kernel: NET: Registered protocol family 2
May 19 14:08:37 anoath kernel: IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
May 19 14:08:37 anoath kernel: TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
May 19 14:08:37 anoath kernel: TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
May 19 14:08:37 anoath kernel: TCP: Hash tables configured (established 262144 bind 65536)
May 19 14:08:37 anoath kernel: TCP reno registered
May 19 14:08:37 anoath kernel: IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
May 19 14:08:37 anoath kernel: apm: BIOS not found.
May 19 14:08:37 anoath kernel: highmem bounce pool size: 64 pages
May 19 14:08:37 anoath kernel: Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
May 19 14:08:37 anoath kernel: Initializing Cryptographic API
May 19 14:08:37 anoath kernel: io scheduler noop registered
May 19 14:08:37 anoath kernel: io scheduler anticipatory registered (default)
May 19 14:08:37 anoath kernel: io scheduler deadline registered
May 19 14:08:37 anoath kernel: io scheduler cfq registered
May 19 14:08:37 anoath kernel: PCI: Enabling Via external APIC routing
May 19 14:08:37 anoath kernel: ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
May 19 14:08:37 anoath kernel: nvidiafb: PCI id - 10de0028
May 19 14:08:37 anoath kernel: nvidiafb: Actual id - 10de0028
May 19 14:08:37 anoath kernel: nvidiafb: nVidia device/chipset 10DE0028
May 19 14:08:37 anoath kernel: nvidiafb: HW is currently programmed for CRT
May 19 14:08:37 anoath kernel: nvidiafb: Using CRT on CRTC 0
May 19 14:08:37 anoath kernel: nvidiafb: MTRR set to ON
May 19 14:08:37 anoath kernel: Console: switching to colour frame buffer device 80x30
May 19 14:08:37 anoath kernel: nvidiafb: PCI nVidia NV2 framebuffer (16MB @ 0xD4000000)
May 19 14:08:37 anoath kernel: ACPI: Power Button (FF) [PWRF]
May 19 14:08:37 anoath kernel: ACPI: Power Button (CM) [PWRB]
May 19 14:08:37 anoath kernel: ACPI: Sleep Button (CM) [SLPB]
May 19 14:08:37 anoath kernel: isapnp: Scanning for PnP cards...
May 19 14:08:37 anoath kernel: isapnp: No Plug & Play device found
May 19 14:08:37 anoath kernel: Floppy drive(s): fd0 is 1.44M
May 19 14:08:37 anoath kernel: FDC 0 is a post-1991 82077
May 19 14:08:37 anoath kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
May 19 14:08:37 anoath kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
May 19 14:08:37 anoath kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
May 19 14:08:37 anoath kernel: VP_IDE: IDE controller at PCI slot 0000:00:07.1
May 19 14:08:37 anoath kernel: VP_IDE: chipset revision 6
May 19 14:08:37 anoath kernel: VP_IDE: not 100%% native mode: will probe irqs later
May 19 14:08:37 anoath kernel: VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
May 19 14:08:37 anoath kernel: ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:DMA
May 19 14:08:37 anoath kernel: ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:pio, hdd:pio
May 19 14:08:37 anoath kernel: Probing IDE interface ide0...
May 19 14:08:37 anoath kernel: hda: Maxtor 6Y120P0, ATA DISK drive
May 19 14:08:37 anoath kernel: hdb: MAXTOR 6L080J4, ATA DISK drive
May 19 14:08:37 anoath kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
May 19 14:08:37 anoath kernel: Probing IDE interface ide1...
May 19 14:08:37 anoath kernel: Probing IDE interface ide1...
May 19 14:08:37 anoath kernel: hda: max request size: 128KiB
May 19 14:08:37 anoath kernel: hda: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(100)
May 19 14:08:37 anoath kernel: hda: cache flushes supported
May 19 14:08:37 anoath kernel: hda: hda1
May 19 14:08:37 anoath kernel: hdb: max request size: 128KiB
May 19 14:08:37 anoath kernel: hdb: 156355584 sectors (80054 MB) w/1819KiB Cache, CHS=65535/16/63, UDMA(100)
May 19 14:08:37 anoath kernel: hdb: cache flushes supported
May 19 14:08:37 anoath kernel: hdb: hdb1
May 19 14:08:37 anoath kernel: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
May 19 14:08:37 anoath kernel: PNP: PS/2 controller doesn't have AUX irq; using default 12
May 19 14:08:37 anoath kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
May 19 14:08:37 anoath kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
May 19 14:08:37 anoath kernel: mice: PS/2 mouse device common for all mice
May 19 14:08:37 anoath kernel: TCP bic registered
May 19 14:08:37 anoath kernel: Starting balanced_irq
May 19 14:08:37 anoath kernel: Using IPI Shortcut mode
May 19 14:08:37 anoath kernel: kjournald starting. Commit interval 5 seconds
May 19 14:08:37 anoath kernel: EXT3-fs: mounted filesystem with ordered data mode.
May 19 14:08:37 anoath kernel: VFS: Mounted root (ext3 filesystem) readonly.
May 19 14:08:37 anoath kernel: Freeing unused kernel memory: 216k freed
May 19 14:08:37 anoath kernel: input: AT Translated Set 2 keyboard as /class/input/input0
May 19 14:08:37 anoath kernel: NET: Registered protocol family 1
May 19 14:08:37 anoath kernel: Linux agpgart interface v0.101 (c) Dave Jones
May 19 14:08:37 anoath kernel: agpgart: Detected VIA Apollo Pro 133 chipset
May 19 14:08:37 anoath kernel: agpgart: AGP aperture is 64M @ 0xd0000000
May 19 14:08:37 anoath kernel: usbcore: registered new driver usbfs
May 19 14:08:37 anoath kernel: usbcore: registered new driver hub
May 19 14:08:37 anoath kernel: ieee1394: Initialized config rom entry `ip1394'
May 19 14:08:37 anoath kernel: ACPI: PCI Interrupt 0000:00:0d.0[A] -> GSI 19 (level, low) -> IRQ 177
May 19 14:08:37 anoath kernel: ohci1394: fw-host0: Get PHY Reg timeout [0x00000000/0x00000000/100]
May 19 14:08:37 anoath kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[177] MMIO=[d9106000-d91067ff] Max Packet=[2048] IR/IT contexts=[4/8]
May 19 14:08:37 anoath kernel: ohci1394: fw-host0: Get PHY Reg timeout [0x00000000/0x00000000/100]
May 19 14:08:37 anoath kernel: ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 16 (level, low) -> IRQ 169
May 19 14:08:37 anoath kernel: 3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
May 19 14:08:37 anoath kernel: 0000:00:0e.0: 3Com PCI 3c905B Cyclone 100baseTx at f887e000.
May 19 14:08:37 anoath kernel: SCSI subsystem initialized
May 19 14:08:37 anoath kernel: libata version 1.30 loaded.
May 19 14:08:37 anoath kernel: Intel(R) PRO/1000 Network Driver - version 7.0.33-k2
May 19 14:08:37 anoath kernel: Copyright (c) 1999-2005 Intel Corporation.
May 19 14:08:37 anoath kernel: ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 18 (level, low) -> IRQ 185
May 19 14:08:37 anoath kernel: USB Universal Host Controller Interface driver v3.0
May 19 14:08:37 anoath kernel: e1000: 0000:00:10.0: e1000_probe: (PCI:33MHz:32-bit) 00:04:23:56:32:e2
May 19 14:08:37 anoath kernel: input: PC Speaker as /class/input/input1
May 19 14:08:37 anoath kernel: e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
May 19 14:08:37 anoath kernel: ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 19 (level, low) -> IRQ 177
May 19 14:08:37 anoath kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
May 19 14:08:37 anoath kernel: e1000: 0000:00:10.1: e1000_probe: (PCI:33MHz:32-bit) 00:04:23:56:32:e3
May 19 14:08:37 anoath kernel: parport_pc: Unknown symbol parport_ieee1284_ecp_read_data
May 19 14:08:37 anoath kernel: parport_pc: Unknown symbol parport_ieee1284_epp_read_data
May 19 14:08:37 anoath kernel: parport_pc: Unknown symbol parport_wait_peripheral
May 19 14:08:37 anoath kernel: parport_pc: Unknown symbol parport_ieee1284_read_nibble
May 19 14:08:37 anoath kernel: parport_pc: Unknown symbol parport_ieee1284_read_byte
May 19 14:08:37 anoath kernel: parport_pc: Unknown symbol parport_wait_event
May 19 14:08:37 anoath kernel: parport_pc: Unknown symbol parport_ieee1284_epp_read_addr
May 19 14:08:37 anoath kernel: parport_pc: Unknown symbol parport_announce_port
May 19 14:08:37 anoath kernel: parport_pc: Unknown symbol parport_ieee1284_write_compat
May 19 14:08:37 anoath kernel: parport_pc: Unknown symbol parport_ieee1284_epp_write_data
May 19 14:08:37 anoath kernel: parport_pc: Unknown symbol parport_ieee1284_interrupt
May 19 14:08:37 anoath kernel: parport_pc: Unknown symbol parport_put_port
May 19 14:08:37 anoath kernel: parport_pc: Unknown symbol parport_ieee1284_epp_write_addr
May 19 14:08:37 anoath kernel: parport_pc: Unknown symbol parport_remove_port
May 19 14:08:37 anoath kernel: parport_pc: Unknown symbol parport_register_port
May 19 14:08:37 anoath kernel: parport_pc: Unknown symbol parport_ieee1284_ecp_write_addr
May 19 14:08:37 anoath kernel: parport_pc: Unknown symbol parport_ieee1284_ecp_write_data
May 19 14:08:37 anoath kernel: Real Time Clock Driver v1.12ac
May 19 14:08:37 anoath kernel: e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection
May 19 14:08:37 anoath kernel: parport_pc: VIA 686A/8231 detected
May 19 14:08:37 anoath kernel: parport_pc: probing current configuration
May 19 14:08:37 anoath kernel: parport_pc: Current parallel port base: 0x378
May 19 14:08:37 anoath kernel: parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP]
May 19 14:08:37 anoath kernel: ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
May 19 14:08:37 anoath kernel: ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
May 19 14:08:37 anoath kernel: uhci_hcd 0000:00:07.2: UHCI Host Controller
May 19 14:08:37 anoath kernel: uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
May 19 14:08:37 anoath kernel: uhci_hcd 0000:00:07.2: irq 10, io base 0x0000a400
May 19 14:08:37 anoath kernel: usb usb1: configuration #1 chosen from 1 choice
May 19 14:08:37 anoath kernel: hub 1-0:1.0: USB hub found
May 19 14:08:37 anoath kernel: hub 1-0:1.0: 2 ports detected
May 19 14:08:37 anoath kernel: parport_pc: VIA parallel port: io=0x378, irq=7
May 19 14:08:37 anoath kernel: ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
May 19 14:08:37 anoath kernel: uhci_hcd 0000:00:07.3: UHCI Host Controller
May 19 14:08:37 anoath kernel: uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
May 19 14:08:37 anoath kernel: uhci_hcd 0000:00:07.3: irq 10, io base 0x0000a800
May 19 14:08:37 anoath kernel: usb usb2: configuration #1 chosen from 1 choice
May 19 14:08:37 anoath kernel: hub 2-0:1.0: USB hub found
May 19 14:08:37 anoath kernel: hub 2-0:1.0: 2 ports detected
May 19 14:08:37 anoath kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
May 19 14:08:37 anoath kernel: ohci1394: fw-host0: Get PHY Reg timeout [0x00000000/0x00000000/100]
May 19 14:08:37 anoath kernel: PDC20265: IDE controller at PCI slot 0000:00:0c.0
May 19 14:08:37 anoath kernel: ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 18 (level, low) -> IRQ 185
May 19 14:08:37 anoath kernel: PDC20265: chipset revision 2
May 19 14:08:37 anoath kernel: PDC20265: ROM enabled at 0x880c0000
May 19 14:08:37 anoath kernel: PDC20265: 100%% native mode on irq 185
May 19 14:08:37 anoath kernel: PDC20265: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER Mode.
May 19 14:08:37 anoath kernel: ide2: BM-DMA at 0xcc00-0xcc07, BIOS settings: hde:pio, hdf:pio
May 19 14:08:37 anoath kernel: ide3: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdg:pio, hdh:pio
May 19 14:08:37 anoath kernel: Probing IDE interface ide2...
May 19 14:08:37 anoath kernel: serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
May 19 14:08:37 anoath kernel: 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
May 19 14:08:37 anoath kernel: 00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
May 19 14:08:37 anoath kernel: Probing IDE interface ide3...
May 19 14:08:37 anoath kernel: usb 2-2: new full speed USB device using uhci_hcd and address 2
May 19 14:08:37 anoath kernel: sata_promise 0000:00:11.0: version 1.04
May 19 14:08:37 anoath kernel: ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 19 (level, low) -> IRQ 177
May 19 14:08:37 anoath kernel: ata1: SATA max UDMA/133 cmd 0xFA948200 ctl 0xFA948238 bmdma 0x0 irq 177
May 19 14:08:37 anoath kernel: ata2: SATA max UDMA/133 cmd 0xFA948280 ctl 0xFA9482B8 bmdma 0x0 irq 177
May 19 14:08:37 anoath kernel: ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 19 14:08:37 anoath kernel: ata1.00: cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f
May 19 14:08:37 anoath kernel: ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
May 19 14:08:37 anoath kernel: ata1.00: configured for UDMA/133
May 19 14:08:37 anoath kernel: scsi0 : sata_promise
May 19 14:08:37 anoath kernel: ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
May 19 14:08:37 anoath kernel: ata2.00: cfg 49:2f00 82:346b 83:7d01 84:4023 85:3469 86:3c01 87:4023 88:407f
May 19 14:08:37 anoath kernel: ata2.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
May 19 14:08:37 anoath kernel: ata2.00: configured for UDMA/133
May 19 14:08:37 anoath kernel: scsi1 : sata_promise
May 19 14:08:37 anoath kernel: Vendor: ATA Model: ST3250824AS Rev: 3.AA
May 19 14:08:37 anoath kernel: Type: Direct-Access ANSI SCSI revision: 05
May 19 14:08:37 anoath kernel: Vendor: ATA Model: ST3250824AS Rev: 3.AA
May 19 14:08:37 anoath kernel: Type: Direct-Access ANSI SCSI revision: 05
May 19 14:08:37 anoath kernel: ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 17 (level, low) -> IRQ 193
May 19 14:08:37 anoath kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May 19 14:08:37 anoath kernel: sda: Write Protect is off
May 19 14:08:37 anoath kernel: sda: Mode Sense: 00 3a 00 00
May 19 14:08:37 anoath kernel: SCSI device sda: drive cache: write back
May 19 14:08:37 anoath kernel: SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
May 19 14:08:37 anoath kernel: sda: Write Protect is off
May 19 14:08:37 anoath kernel: sda: Mode Sense: 00 3a 00 00
May 19 14:08:37 anoath kernel: SCSI device sda: drive cache: write back
May 19 14:08:37 anoath kernel: sda: sda1
May 19 14:08:37 anoath kernel: sd 0:0:0:0: Attached scsi disk sda
May 19 14:08:37 anoath kernel: SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
May 19 14:08:37 anoath kernel: sdb: Write Protect is off
May 19 14:08:37 anoath kernel: sdb: Mode Sense: 00 3a 00 00
May 19 14:08:37 anoath kernel: SCSI device sdb: drive cache: write back
May 19 14:08:37 anoath kernel: SCSI device sdb: 488397168 512-byte hdwr sectors (250059 MB)
May 19 14:08:37 anoath kernel: sdb: Write Protect is off
May 19 14:08:37 anoath kernel: sdb: Mode Sense: 00 3a 00 00
May 19 14:08:37 anoath kernel: SCSI device sdb: drive cache: write back
May 19 14:08:37 anoath kernel: sdb: sdb1
May 19 14:08:37 anoath kernel: sd 1:0:0:0: Attached scsi disk sdb
May 19 14:08:37 anoath kernel: usb 2-2: configuration #1 chosen from 1 choice
May 19 14:08:37 anoath kernel: scsi2 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 7.0
May 19 14:08:37 anoath kernel: <Adaptec 19160B Ultra160 SCSI adapter>
May 19 14:08:37 anoath kernel: aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
May 19 14:08:37 anoath kernel:
May 19 14:08:37 anoath kernel: Vendor: COMPAQ Model: SDT-10000 Rev: 1.09
May 19 14:08:37 anoath kernel: Type: Sequential-Access ANSI SCSI revision: 02
May 19 14:08:37 anoath kernel: target2:0:3: Beginning Domain Validation
May 19 14:08:37 anoath kernel: target2:0:3: wide asynchronous
May 19 14:08:37 anoath kernel: target2:0:3: FAST-20 WIDE SCSI 40.0 MB/s ST (50 ns, offset 15)
May 19 14:08:37 anoath kernel: target2:0:3: Domain Validation skipping write tests
May 19 14:08:37 anoath kernel: target2:0:3: Ending Domain Validation
May 19 14:08:37 anoath kernel: st: Version 20050830, fixed bufsize 32768, s/g segs 256
May 19 14:08:37 anoath kernel: st 2:0:3:0: Attached scsi tape st0<4>st0: try direct i/o: yes (alignment 512 B)
May 19 14:08:37 anoath kernel: EXT3 FS on hda1, internal journal
May 19 14:08:37 anoath kernel: md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
May 19 14:08:37 anoath kernel: md: bitmap version 4.39
May 19 14:08:37 anoath kernel: md: md0 stopped.
May 19 14:08:37 anoath kernel: md: bind<sdb1>
May 19 14:08:37 anoath kernel: md: bind<sda1>
May 19 14:08:37 anoath kernel: kjournald starting. Commit interval 5 seconds
May 19 14:08:37 anoath kernel: EXT3 FS on hdb1, internal journal
May 19 14:08:37 anoath kernel: EXT3-fs: mounted filesystem with ordered data mode.
May 19 14:08:37 anoath kernel: EXT3-fs: unable to read superblock
May 19 14:08:37 anoath kernel: ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 16 (level, low) -> IRQ 169
May 19 14:08:37 anoath kernel: eth0: setting full-duplex.
May 19 14:08:37 anoath kernel: NET: Registered protocol family 17
May 19 14:08:37 anoath kernel: e1000: eth1: e1000_watchdog_task: NIC Link is Up 1000 Mbps Full Duplex
May 19 14:08:37 anoath kernel: Netfilter messages via NETLINK v0.30.
May 19 14:08:37 anoath kernel: ip_conntrack version 2.4 (8192 buckets, 65536 max) - 224 bytes per conntrack
May 19 14:08:37 anoath kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
May 19 14:08:37 anoath kernel: lp0: using parport0 (interrupt-driven).
May 19 14:41:32 anoath kernel: ACPI: PCI Interrupt 0000:00:0f.0[A] -> GSI 17 (level, low) -> IRQ 193
May 19 14:41:32 anoath kernel: rt2500 1.1.0 CVS 2005/07/10 http://rt2x00.serialmonkey.com
May 19 14:56:38 anoath kernel: rt2500 EEPROM: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Channel
May 19 14:56:38 anoath kernel: rt2500 EEPROM: 8 8 8 8 8 8 8 8 9 9 9 9 9 9 dBm Maximum
next reply other threads:[~2006-05-19 16:15 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-05-19 16:15 viet [this message]
2006-05-22 7:10 ` pdc20575 and driver 1.04 Jeff Garzik
-- strict thread matches above, loose matches on Subject: below --
2006-05-22 9:23 Phil Dibowitz
2006-05-22 17:10 ` Jeff Garzik
2006-05-22 18:29 ` Phil Dibowitz
2006-05-24 8:06 ` Phil Dibowitz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200605191815.44099.viet@mandriva.com \
--to=viet@mandriva.com \
--cc=jgarzik@pobox.com \
--cc=linux-ide@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.